Main Menu
Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - tonymy01

#541
That is a strange statement?
The idea of Interactive is that it is (meant) to be an automated method to get the shows you want to watch without human intervention.   To achieve what you have said, someone would need to be constantly keeping an eye on the guide and, if they are not at home/near their PVR, determine if they actually got the (whole) show in the first place in the case of these repeat viewings.
I think it is better to not have the repeat flag for anything in question, or anything that was re-run due to a technical problem (and/or bulletins etc that move the guide around last minute before ICE could propagate the changes thru), than to have the flag there and have people miss recording it as they weren't looking at the guide.
Some people rely on this to record their shows while away/whatever, and it isn't convenient to even check the guide.
I checked the guide over 3G while in Germany (roaming with Optus), and got a $40ish data bill for the privileges, so I don't plan on doing *that* again..
Regards
#542
Interesting that the keyword recording uses the selected radio button also, that isn't really intuitive nor was it mentioned in the online help when choosing the help option while trying to do a keyword record (I guess you just made this change to its functionality?).   This will certainly help reduce the number of unwanted hits on program descriptions for known program titles (not entirely mind you, with simple prog names like 24, house, lost, I am sure these appear in other prog titles too, but it is a good start to improving this keyword searching algorithm, thanks!).   This may explain why some peoples keywords are now broken, as they may have expected it to always search on progname and description.
Regards
#543
Beyonwiz / Re: USB Modem loading EPG
February 16, 2009, 10:24:06 AM
The Beyonwiz next beta f/w being tested right now finally properly caches the EPG so that after power down/up, it ends up with full EPG within seconds.   Right now with the current firmware, as it is, with ICETV anyway, it appears to need an internet connection after powering up to get the ICE data to display.
#544
Beyonwiz / Re: WIN Mackay
February 15, 2009, 12:00:08 PM
You probably have to delete all the channels first before doing a scan, or else you will get duplicates of anything that has changed.
#545
However, it is a re-run as many people didn't get it the first time due to the networks mucking up the schedules.
#546
QuoteAdd a Keyword Record or Keyword Favourite for  ‘lost fox’
Sorry, there were no matches. Please ensure all words were spelt correctly, then search again.
Doesn't look like it works to me?
edit:
Doh, I didn't have the radio button "titles and descriptions" ticked... hopefully you *don't* need it ticked for setting up keywords?

edit2:
Why has my Dexter keyword have a timer setup for OneHD and Ten this Monday? 
I have prefer HD of course, but Dexter appears 3 times in the Guide now, on One, OneHD and Ten in the ICE EPG, did this break the prefer HD algorithm when One(SD) was added to ICE?
Regards
#547
I am very used to pressing that "record" button now.   ICE knows you have a series record for some stuff, but doesn't have the icon lit up (this happened to me big time when the DST transition happened and I deleted all the 1hour out timers on the Wiz).   It hasn't happened to me recently apart from when mucking about with setting up stuff, or stuff that the networks have mucked about it seems...
Regards
#548
Quote from: Neon Kitten on February 14, 2009, 04:40:34 PM
We *need* a "prefer HD" option in series record, and we need it yesterday.
Yep, definitely.  You probably read my other woes about keywords.   I don't need to do keyword recording as I know the show name to record, but keywords is the only way to get a show to be preference to HD rather than SD.   But keywords for "medium, 24, lost, house" all appear in countless other program descriptions over a week, and often repeat shows too (can't select first runs or not with keywords).   We need an Interactive revamp, and in a hurry!
Regards
#549
Beyonwiz / Re: WIN Mackay
February 14, 2009, 04:26:14 PM
The LCN is set by the broadcaster, you might want to give them a call...
#550
Tell me about it.   For simple prog names like "Lost" and "24" and "House", these appear all over the weekly guide in various program descriptions, it is impossible to be able to tailor these keyword recordings to get the progs you want, all to get the PVR to record the HD vs SD of the show (since 7 & 10 seem to have screwed everyone over with random appearances only of these shows on HD.... well, not House per se...yet..., but everything else).
Regards
#551
IceTV EPG Content / Re: Ten rebranding
February 12, 2009, 06:02:07 PM
"One Digital" (which is the name as presented by the broadcaster when you rescan) is an SD duplicate of "One HD".   "Ten Digital" is as Ten calls it, is their primary SD channel.   
Should ICE give them different names to the broadcaster, and confuse the masses even further (look at the freeview website and dtvforums for how much confusion the OneSD/HD is causing people), or should they keep them as the names that the broadcaster intended?   I would say number 2, at least for the time being until people understand what OneDig, OneHD, Ten Digital are.
#552
IceTV EPG Content / Re: Ten rebranding
February 11, 2009, 03:47:43 PM
LCN1 I think would bet the primary TenHD channel, 11 is an alias.
So it used to be way back:
10,1=TenSD (I used "10" at the time to access the SD channel, but some used 1)
12=TenHD
Then they changed mid to late last year:
1,12=TenHD
10=TenSD
And now finally:
1,11=TenHD/OneHD (sniff, goodbye TenHD, I knew you well).
10=TenSD
12=OneSD

So the main change really is the LCN12 (which was a HD alias to 1) has become the new SD channel (this is all very well detailed in a Ten press release last year about their new "ONE" channels).
LCN11 appears to just be there to fill the top bunch of channels with a few extras to make people's STB/etc who aren't using faves and/or deleting extras show more of the Ten channel (and maybe for those that never bothered to rescan and have been used to watching HD on 12 can now watch on 11?)
Regards
#553
Beyonwiz / Re: WIN Mackay
February 10, 2009, 11:04:16 PM
350onwards is what a DVB-T device is meant to give a channel that isn't properly broadcasting an LCN (or has a duplicate LCN to another already in your scanned list).  It seems some boxes are better than others at supporting this standard, but this is moot, as I think ICE expects Win to be on LCN9 and 90 (or maybe 8 and 80 for regionals, dunno).  What the heck is "971"?  That seems very odd indeed!   Have you tried deleting all channels from that broadcaster frequency, and rescanning?  (Hint: press list during live TV viewing and follow the help prompts to delete).
#554
I have had a House series record for a while now (6 or 7months perhaps?  Pretty much since Interactive started, anyway), and it scheduled just fine for my Wiz these last 2 weeks, so I don't think that explanation is quite right in the other thread.
#555
Beyonwiz / Re: Can't Set Up Beyonwiz DPP2 Network
February 09, 2009, 12:45:35 PM
That IP address is the DNS address!! (this is to resolve the hostname of ice.com.au or wherever the Wiz is set to get the stuff from).  Don't ever use it for your main IP address!  You won't find your computer unless you setup a share with correct username/password to what you setup in the Wiz windows networking.  You are best to verify at least your local network connection by runnning WizFX (and ensuring you enable WizPNP server on the Wiz to share files out this way).
You need to manually create devices in the ICE Interactive setup on their account options etc webpages.   Once you setup one device, you should be able to get the Wiz to point to that device when you setup your ICE username/password/etc on the Wiz.
Regards