Main Menu
Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - tonymy01

#526
did you make sure you had "title and description" radio button ticked when you set it up?
#527
Beyonwiz / Re: No standard definition program material
February 20, 2009, 02:58:17 PM
No, that is not what I meant.
I meant to be channel surfing within a favourites group, you need to select the group and select a channel within the group with the fav key (and arrow/ok keys to select the channel), as per PRL/Peters post above.   Once you do that, then up/down surfing is in the order that you setup in your fave group, and the EPG is in that same order.   Once you do that, then you don't have to keep doing it unless you want to move to a different favourites group.
I personally have not deleted the "placeholder" channels that (especially) 7 (and to some extent SBS) broadcast (e.g. 7 Digital 1, 7 Digital 2, and SBS3 SBS4 SBS5), as they may actually choose to put something on these channels apart from the same thing as their main channels.   Once you have setup a fave group, you can forget about them until one day you see them advertise (or read on a forum) that something new has come up, then you don't need to rescan to get the channel that you deleted, which has nasty side effects like deleting or buggering your timers, buggering your favourites group etc.

As far as missing info goes... ok, lets try to work through this with a clean slate.
*Did you get any duplicates with the *same* channel number, e.g. two "7" LCNs?   You said you got multiple Channel Sevens, but I don't know if you meant multiple "7" LCNs (logical channel number, the definitive number to access an Aussie TV broadcast), or you mean the "7 Digital 1" "7 Digital 2" channel NAMEs (these are NOT LCNs.   The LCNs for those are 71 and 72 I think from memory).
If you got more than one LCN 7, then more than likely you are receiving the broadcasts from two different locations.   This can confuse the Wiz, as it only loads EPG into the 1st one it finds, not all of them.   For free to air EPG, there is a "quirk/bug" also with this, in that if the two broadcast locations have the same network information, and you delete all the channels except one channel from the wrong broadcaster, you won't get any EPG for the *whole* other broadcast location in some instances.
So when you bring up the list, choose "all services" and then carefully go through the list and ensure you delete ALL the services from the duplicate broadcaster with the poorer reception.   That service view shows you the RF frequency & channel number, as well as the LCNs and channel names in the list, so you can determine which of the LCNs are from which frequency.

Second potential "gotya" is are you are in a regional area, and so the specific LCNs that ICE believe you have are regional?   If your LCNs are different to what ICE thinks is in your area, you won't get EPG for those channels.

So as per my Sydney list: ABCHD,ABC1,ABC2,7HD,7SD,9HD,9SD,10HD,10SD,SBS1,SBS2,SBSHD
the LCNs for these MAIN SD/HD channels in Sydney are:
20,2,22,70,7,9,90,9,1,10,3,33,30  (can't remember the SBS ones exactly).
ICE may also load EPG up into LCN21 which is another "placeholder/copy" of ABC1 on LCN2.
In regional areas Seven is on the LCN6 range I think, and Nein is on the LCN8 range I think.   TDT, Win etc etc are potentially on different numbers.   Have you setup your ICE webpage profile to be in your correct area, and ticked all the channels you want?

Finally, is the ICEguide option enabled or disabled in the Beyonwiz?   It can disable itself if it can't contact the ICE servers, and so the EPG you are looking at may not be the ICE but the local broadcast guide instead, and often that is of dubious quality & quantity in some regions.

Hope this helps, good luck!

Regards
#528
Ok, just looking at what I have.
I have red blobs for next Tuesday night (for NCIS, biggest loser etc).   But for Wednesday night, I have red doughnuts (House, Lost, biggest L).   I haven't powered the Wiz up since 4am this morning.  So the 5 day thing is about right.. doesn't help you for why you don't even have a doughnut for Tuesday?   Do you have any other red blobs for Tuesday night?  What about Wednesday?
Regards
#529
ICE Interactive waits until "about" 5days before the show is due to show to set the timer.  I had to look up when the show is on, Tuesday... hmm, only a bit over 4 days away... it certainly isn't flagged as a repeat (which can also be the reason why a series record will be listed against an event but no red blob on it).
I wish ICE would get some kind of textual based logfile you can look at for all your events, why they succeeded or failed, why, even though you have a series record on a show for the week, that it doesn't have a blob on it, etc.
Regards
#530
Beyonwiz / Re: No standard definition program material
February 19, 2009, 10:16:49 PM
As we have said, when you setup (and are within!) a favourites group, the EPG matches the channels and order in the group.  I am sure 99% of us use the favourites exclusively as it cuts the junk out.
It sounds like you are not going to your other favourites group and thus limiting what you see.   You need to select a channel in your other favourites group to see the channels (and move into the group).   No point in viewing all channels as there is so many duplicates and what-not that you will see lots of blanks when looking at the EPG (as ICE only loads up into ONE of each of the primary channels, so for Seven it would load into SevenSD and SevenHD only, and if you had a duplicate of SevenSD due to getting broadcasts from multiple transmitters, would only load into ONE of those duplicates).

edit:
I am not sure why you are thinking you are missing something when you setup a group with only a few channels (e.g. HD channels)?   If you think you are missing something, why don't you setup a group with ALL the channels you wish to watch, that is what a favourites group is really about, is to sort the channels in the order YOU want them in, and to view the EPG only for those channels.  Not much point in having a HD only group really?
Regards
#531
Yep, the favourite thing is a good thing to do, as then you can more quickly see the yellow blobs and wonder why there isn't red blobs against them...
#532
Beyonwiz / Re: No standard definition program material
February 18, 2009, 10:28:19 AM
I did the same Peter, and end up in the "all" most of the time.   But "all" still isn't *every* channel due to all the duplicates (and the LCN default ordering of the channels of course would not be to most peoples liking).
I put the order much like:
ABCHD,ABC1,ABC2,7HD,7SD,9HD,9SD,10HD,10SD,SBS1,SBS2,SBSHD,D44junk(LOTs of channels here)
So channel surfing can still get me to the "D44 junk" and/or SBSHD (which really doesn't have any HD on it), while still giving me real channels in the order I am used to for the rest (I just tend not to cycle back around to ABC as there is a LOT of D44 channels to wade thru, I will either cycle up and down to surf, or punch in "2" on the remote to get to ABC).
Regards
#533
IceTV EPG Content / Re: ABCHD missing from the EPG
February 18, 2009, 09:24:42 AM
ICE is only showing the proper HD shows they broadcast (not upscaled SD), as most people with a HD setup don't really want to record upscaled SD (i.e. only want to record true HD on HD channels), and it makes it very easy to see what is really HD coming up on ABCHD (i.e. bugger all).
Everything else is just an SD simulcast (and/or the weather pattern... well used to be during the news anyway).   Pathetic of Auntie isn't it.   You can go into the ICE setup webpage and tell it to copy the SD guide to HD for the missing timeslots.
ICE used to do the same for 7,9,10 too, but gave up when those broadcasters starting mixing and matching different shows on the different channels.
Regards
#534
Beyonwiz / Re: No standard definition program material
February 17, 2009, 11:09:16 PM
Yes, favourites is for channel surfing (using the up/down) and the order (and filtering) is used for the EPG display also.
Sounds like you didn't setup the other group properly?
Regards
#535
Beyonwiz / Re: No standard definition program material
February 17, 2009, 10:48:12 PM
Do you have multiple of the same channel number?   ICE only loads up for the 1st one, which may be hidden out of your favourites group.
So hit the list button, and then choose all services, and check what you have in the list.   If you have, say for example, two "7"s, you will find the EPG in one of them only.   Delete the one with worse reception, if they are both received on different RF frequencies.    You may need to restart once you delete the duplicates to get the correct one filled, not sure about this.
Regards
#536
Yep, same here.  This is one show title that definitely won't appear elsewhere in other titles and isn't running repeats.   They had an SD only show last week or the week b4 too...
#537
Ok, next question.
What was the two LCNs for the SD/HD on each frequency?  Was it the same?
If it was different, this will explain your problem, as ICE is expecting to load it into LCN X(I dunno what number for TDT) when you are receiving it on LCN Y.
Perhaps you need to delete ALL TDT channels altogether, and do a "partial scan" only on UHF frequency 52.
Perhaps the Wiz, when it detected the duplicate LCNs, did the right thing for once and mapped the second LCN to a different number to the first (meant to start from 350), and I think the ICE data only loads based on LCN mapping.
Regards
#538
Are you sure you deleted *all* the channels broadcast from that channel 36?  Is there any radio channels, HD channels, silly "Digital 1" "Digital 2" etc "placemarker" channels?
Make sure you are viewing all services with the "list" button (and choose all services).
Regards
#539
LCN=logical channel number.   This is the number that identifies a channel and is displayed when you channel surf, when you want to punch a number in to change channels etc.
So did you delete all 5 that were scanned in on the bad frequency?   (or did you mean LCN 5 is duplicated, if that is the only duplicate, delete that.   The Beyonwiz forums tells you how, hint "list", view all services, delete the ones on the dodgy frequency, job done).
Rescanning doesn't automatically delete old channels either?   Unless you did a factory reset anyway?
But don't bother, if you are receiving from 2 frequencies, one good, one bad, you either shouldn't do a full scan the next time you need to scan (and thus avoid the dodgy one) or get used to doing the hint step above.
Regards
#540
You have to delete all the channels from the scanned frequency typically.    Are they both showing the same LCN (when you had both scanned in) for the TDT channels offered?
Regards