Main Menu
Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - tonymy01

#481
Most PVRs don't have the smarts to track a show themselves.   The Topfield 5K got these smarts with some smart people writing good TAPs to scan thru the EPG, but even that is a bit of an inconvenience as it pinches a lot of the PVR resources while it is doing the scanning (normally people schedule the unit to wake up and do this at some un-godly hour of the morning).    All most PVRs let you do is what you have stated, periodic timers.    ICE Interactive unlocks that issue, with all the grunt work being done by Interactive (we have written a similar thing for the Topfields that support TAPs with PC only TED/S doing the keyword searching, preferences etc, actually it ends up being a better system than interactive in some ways as it lets you setup priorites on your shows so if you get a 3way clash it can ditch your least favourite show, a similar package however open source Perl pvrtimersd/perl2tgd which will even run on a little wireless Asus/ICEbox router, and EPG_uploader does the work at the Topfield 5K/6K end, uploading the EPG and timers).
I would suggest getting your network fixed up and/or shoving your 7100 sideways where it doesn't fit into a Topfield Engineer, and keep pushing to get Interactive working 100% on your unit.   I assume you are constantly reading the Topfield forums over at http://forum.itopfield.com.au/default.aspx to keep abreast of the current issues and how people are working through them?   Apparently the firmware released this week was the best yet for ICE support, and some people once they reset their units are having no issues...

Interactive is working 99.9% perfectly for Beyonwiz owners sorry to say...
Regards
#482
Yep, I did that at 3am today, and it worked fine.   Last time (when we went from non-DST to DST) I deleted all the timers from the Wiz first, and this was a bad thing to do as it tells ICE you don't want that show recorded for the week and no amount of "resend timers to all devices" would work last time...

The reason the timers need to be resent btw is pretty simple, the ICE timers are in GMT, and the Wiz simply adds the *current* GMT offset to the timer info sent by ICE, but of course when timers are built for post DST while it is still DST means they will have 11hours added, not 10.  So once the DST transition happens, simply resend all the timers, and the Wiz adds the now 10hour offset (presumably you fixed the Wiz clock first of course) and thus all the correct time.   I guess ICE must have also fixed it to properly delete the current matching timer names, as it definitely deleted the wrong timers and created the correct timers for me this time simply by doing a resend from the account settings.
Regards
#483
IceTV EPG Content / Re: NRL Footy Show
April 01, 2009, 04:54:17 PM
What channel did it record?  Was it WINHD?  If so, then it is a case of "well, yet another show Win isn't showing on their HD channel vs SD channel" (you understand ICE's process for determining Nine and it's affiliates guides don't you?), but if it was another channel then.. what the?
#484
Have you tried the Topfield forums?  http://forum.itopfield.com.au/default.aspx
Regards
#485
Beyonwiz / Re: Cannot see Device
March 31, 2009, 11:15:41 AM
EPG? Programs?
You see normal looking EPG in the Wiz, but datafilled with ICE data.   Look descriptions of at "A Current Affair" and "Today Tonight", and late night on Nein (will show "N/A Channel Nine" or something like that) to prove it is ICE data.
To set interactive timers, you need to select entries in the ICE EPG here at ICETV and choose whether you want to record once or all eps, including reruns or first runs, and all channels or this channel..   and choose the device you want the timers on.
Job done!   Then wait the required delay, and you will see the timers in the Wiz just like normal timers.
If you setup a daily wakeup timer on the Wiz (not a real timer, just a view timer) then this will ensure the Wiz will get new updates from ICETV at least once a day (I have mine setup for 4am, but apparently ICE can be making last minute changes to the schedule when they learn about it, so maybe later might be wise, but I do it early to avoid any clashes, as any timer later in the day will take one timer slot away from potentially recording 2 shows at once.  I guess  during the week this isn't an issue, but the weekend it is.   Maybe I should setup a weekday 5pm 15minute view timer, and a weekend 5am view timer).
#486
Beyonwiz / Re: Cannot see Device
March 31, 2009, 10:16:11 AM
That first error is a DNS error.   Did your Wiz get a DNS address from your main router? (you can check with the red key I think it is).   You should test your wiz network connectivity with wizfx (enable WizPNP server on the WIz).  This will prove the physical network is working, and the IP address, but doesn't prove the gateway or DNS.   I guess the checking of user credentials or using WizTV is the best way to test whether that is correct.
It is quite normal for ICE to throttle the EPG and timers, so you will see this message a LOT.   This is probably a sign that things are working... so what did you change?

Once you get a network up, you can select the device on the Wiz, and then be able to make timers from the schedule on ICE interactive to the device.   You setup this device name in the ICE account pages.

Regards
#487
Peter will push his "JustEPG" but I use a few different ones (Jimsguide/MultiviewEPG, PlasmaEPG) when I could be bothered (JustEPG is a serious memory hog bug does what it says on the box, which is lots these days).. I actually tend to stick with the "MultiServiceDefaultEPG" tap that sends the red key when you go to the EPG, and this will leave you in 4 channel horizontal mode.   Combined with the memory patch that stops the Toppy changing channels while you are trying to look at other channels in the guide, and this is good enough for me.   But, like you, I often don't see red dots on shows set to record, as they are all pre & post padded with the keyword prog I use to record about 80 of my favourite keywords, "perlTGD", and uploaded using EPG_uploader (which does the memory patch actually to stop the channels changing when you are looking at the guide).
Actually, now I tend to use the 5K once or twice a week only now (mainly to delete all the shows that my Beyonwiz has recorded already), so I am less fussed about the EPG layout really.
#488
Yeah, same with mine, but better than new eps NOT being on my HDD :-).
#489
IceTV EPG Content / Re: Where's ABC HD gone Perth?
March 31, 2009, 01:41:10 AM
Oh, I wasn't sure if you were or weren't copying your SD shows over based on your comments above.  It must be one of the weekend things that sorts itself out when people are working on it.
#490
IceTV EPG Content / Re: DST offset
March 30, 2009, 10:36:22 PM
Yes, of course all your timers would have already been set for the wrong time (as ICE GMT + wrong offset = wrong start time).  Last transition I deleted them all and tried to go into my account settings and resend, but it didn't work as the act of deleting them all told ICE "nup, don't want to record this for this week", so going into the account settings and resending didn't want to send any for the ones that I had deleted.   Is there a delete all option, do that and a resend and it should work fine.   I was deleting them individually was the issue.
#491
It is a Topfield 5K thing.   I think it is due to the EPG not starting at the exact same minute as the last time, and perhaps the eventID being different (not sure on that, there used to be memory above the timers on the 5K by doing a memory dump that would indicate where the R icons where stored, but last time I checked, it wasn't there.)   The API to set timers certainly doesn't let you access the R/Rt icon info.  So as you have learnt, you either need to use a third party EPG which works off the start time, duration and channel to determine what blobs to light up, or attempt to create a timer and get told one already exists for that interval.
Regards
#492
IceTV EPG Content / Re: Where's ABC HD gone Perth?
March 30, 2009, 11:48:16 AM
Like I said, with one show or less a week, your media centres incorrectly report an issue that doesn't exist.   ABCHD really doesn't have anything showing in HD at the moment (well, native HD). 
#493
IceTV EPG Content / Re: One Digital, Formula 1
March 29, 2009, 07:22:31 PM
Nobody knew Ten was going to pull this stunt.   From what I have read on the dtvforums, even the Ten EIT was wrong...
This was actually a good stunt to pull though, as it gave more bandwidth for ONEHD and for Ten (ONE DIGITAL SD is really a waste of space anyway).
Regards
#494
IceTV EPG Content / Re: Where's ABC HD gone Perth?
March 29, 2009, 02:32:48 PM
Have a look, they are there, but ABCHD is lucky to have one HD show on a week.   If you don't like this, you can choose to copy the SD guide to the HD guide in your account preferences.
#495
IceTV EPG Content / Re: Motor Sport: V8 Supercars
March 29, 2009, 01:38:32 PM
The V8s are shown on ONE as it isn't part of the championship (one of the drivers said yesterday it should be, but that would open up a can of worms about televising rights I am sure).
Regards