Main Menu
Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - srto2

#46
Hi DMC, thanks for that!  I did the same and still got the old file.  I'll write the image now!
#47
Hello!  Is anyone there?   Sorry to be impatient but your new link still points to the older image...
#48
*aae861d.img returns file not found
#49
Daniel, the new download link still points to the older file...
#50
Hi Daniel,

Kodi version is STILL 9a5f365.
Let me try a download again

The video "card" in the box is Intel UHD Graphics 630 if that helps!
#51
Quote from: MD on July 05, 2023, 03:30:20 PMDaniel Hall, our CTO & Software Manager replied after my last cone commenting as to whether your setup had an NVIDIA graphics card. That may be the cause and we have a solution
Repies are thick and fast now.  I'm about to install with the new image.
#52
Quote from: Daniel Hall at IceTV on July 05, 2023, 03:15:08 PMI have an idea on what the issue is now, and if you are using a mini PC then you won't have an nVidia graphics card in play, I have just had the download links updated with the latest version of the IceBox BYOB software, please install that on the machine and give it another go.

The download links can be found at https://support.icetv.com.au/hc/en-us/articles/6591367595407-IceBox-BYOB-Installation-Links
Writing the USB stick now...
#53
Quote from: Daniel Hall at IceTV on July 05, 2023, 03:05:23 PMUnder the settings of Kodi, in the LibreELEC settings, under the About tab on the left, what is the version number that is displayed?
devel-20230205230517-9a5f365
#54
Quote from: MD on July 05, 2023, 03:03:31 PMIs the IP address visible in the network setup section?  If not you are not connecting.

If connected once signed in to IceTV a very brief, maybe 2 seconds max, TVHeadend "not connected" message will appear but as it connects via IP a successful connection message will appear.

I suspect you either don't get an IP address in the initial BYOB setup page, the third one after language and then naming the box, or you have a local network issue that is holding back a proper connection.  We have thousands logging in every minute and no issues whatsoever.
Thanks for sticking with me.

Yes, the IP address is visible in the network setup.  I have no problem in telling you that it is 192.168.1.134 LAN and/or 192.168.1.89 WiFi.

Yes, the "TVHeadend not connected" message does appear briefly BUT at the point where the IceTV setup is supposed to occur I get another popup that says "TVHeadend Server 4.2 Update Failed" and I can assure you that I have not initiated anything else at that stage.

I have tried this now on three machines with multiple install sticks and multiple hard drives all up probably 30 times now.  I've bypassed my LAN completely by connecting direct to my modem.

It's the same error every time with the same result and it has to be a install software issue, doesn't it?




#55
Quote from: MD on July 05, 2023, 02:35:09 PMAre you sure you get a IP address at the network setup section otherwise you can't setup IceTV?

Why do you specifically need to access TVHeadend?  If the installation follows through to the completion of the IceTV user details the channels will be scanned etc.
Absolutely I get an IP address.  I can ping the box and I can browse the SDD remotely with a filemanager.

I don't want to access the TVHeadend!  Believe me!  A message pops up that an update to the TVHeadend failed.  That's at the time I would expect the IceTV menu to appear but it never does.  It seems to me that is the point of failure. 

But what would I know!!

Subsequent trawling thru the menus shows that an update to the TVHeadend is available, but it won't install from there either.  The installation fails from there too.

If the thing is trying and failing to update itself on the initial installation maybe a patch to the install image might effect a fix?

Please!


#56
NOTE:  At the point where you press "NEXT" and wait for the IceTV setup I get the pop-up "TVHeadend Server 4.2 Update Failed"  The IceTV setup never appears.
#57
Quote from: MD on July 05, 2023, 01:30:07 PMWhen you have done the wifi setup do you have an IP address in the chosen wifi pane? If so, after that, does it go to SMB/SSH which can be left as the default SMB only, then on pressing "next " the next pane that comes up should say please simply wait for up to 30 seconds until the IceTV setup menu appears.  Don't do anything until it does. It is very important to DO NOTHING or the IceTV setup will be skipped. Once it's appeared fill in your IceTV details and then channel scans, EPG matching and timers should run.
Thanks Boss!  Yep.  All of that. Many times now.  The IceTV setup menu NEVER appears. I've even gone to make coffee or have lunch waiting for the IceTV setup to appear.  So no channel scans, no EPG.  It always just jumps to the KODI menu. 

The TVHeadend Server 4.2 appears to be installed but I can't reach it with a browser as suggested by DMC.  I can browse the drive with a file manager. 

As I've detailed I have tried this install many times now on three machines - and I can't tear my hair out because I don't have any...  I'm sure there's something screwy happening  but I don't know where to start looking beyond what I've already done.
#58
Quote from: DeltaMikeCharlie on July 04, 2023, 07:07:12 PMYou can try to browse to tvheadend by going to 'http://[IP Address of your IceBox]:9981'.  This will tell you if tvheadend is running.

Another thing to check in Kodi is the setting for the 'Tvheadend HTSP Client' addon.  Ensure that the IP address is 127.0.0.1 (This always means 'this machine') and that the HTSP port is 9982.

 I have created another install USB stick on completely different PC and installed ICE to a virgin SDD.  I have connected the WiFi directly to the service that Optus 4G provides (a multi layer private network) thus bypassing my Router. The result is the same.  I can install WiFi details but that's it.  The install bypasses any other setup and jumps to KODI.  Any other install/setup input can be installed from appropriate menus but nothing works.

The machine appears on my network ie (after restoring its connection to my Router) but the headend cannot be reached with a browser. I can browse the contents of the drive with a file manager. But I don't know what settings need to be checked or changed.  Presumably SSH will work, too.      From the add-ons menu the HTSP settings appear to be correct. The TVHeadend Server 4.2 appears to be installed...  The settings are set to defaults.

If I switch to TV on the main menu the PVR server startup remains at 0% forever.

After about 20 installs on three different machines with the same result I have to conclude that there is either something screwy with the install image - or I am making some weird mistake over and over ad-nauseam - or my Optus 4G internet connection is inhibiting some required module.
 
Now, I know this thing is in Beta but I didn't expect this sort of issue.  There must be a newer version of the install image, or at the least, a copy from another repository.  Surely.
 
For the moment I have run out of ideas and I'm hoping for some more input from a guru!
#59
Thanks Ian.  Hard Reset done.  At startup I can enter WiFi details, LAN is OK & WiFi is OK, but Ice setup is still skipped and TVheadend does not start - and will not update.

Unless there's some screwy Router, LAN or WAN issue at my end, surely the downloaded image must be corrupted?  But having said that you'd really expect the install to just fail.  All settings appear to function normally otherwise, but I don't have a TV Headend.  The default tuner drivers appear to install normally and they are brand new from Ice.

I've been at this all day today (and most of yesterday) but tomorrow I might temporarily bypass my router and connect the box direct to my Optus 4G modem.  That will bypass the router's firewall and secure DNS etc.
#60
Thanks Ian.  I was thinking a corrupted install image...    But I've downloaded the image twice, installed to separate USB sticks and tried the install on three machines now - two i5 laptops of different vintages and the newer i7 mini box.- with the same result. I think it has to be the install image.

Is there another link to perhaps a newer image or a different repository?
By hard reset do you mean a cold boot or a complete HDD wipe?

Meanwhile I'll download the image to a different location (just for fun) and try again.

Update: This time I was able to enter wifi details but not Ice login.  Subsequently I can enter Ice details manually but no fetch occurs.

And: The event log says TVheadend HTSP Client server is unreachable and TVheadend server 4.2 Update Failed.