Main Menu
Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - brianh

#46
General Discussions / Re: Icebox2 Setup Problems
July 25, 2006, 08:31:03 PM
Oh, and don't forget to do what Evan said above.... :-[   (of course, I SHOULD have thought of that....)

Once you have done the above, it helps you
1) find the IceBox2 -
2) assign a new static IP address
3) then you can return your PC to get it's IP automatically, as it probably was before - following Evan's instructions above....   

Hope this helps,  ???

Cheers,
Brian H 
#47
General Discussions / Re: Icebox2 Setup Problems
July 25, 2006, 02:09:16 PM
Hi Jason,

You need to know what the IP range of your network is set up as; this can vary with each person, but whoever set up uyour network would be able to find this out.

I would reccomend using a static address, so you can find it to log in to - eg.

I have an ADSL modem (non-wirelss) with IP address range of (say) 192.168.2.1 - 192.168.2.20
The address of the modem/router is,say, 192.168.2.19

I could then set up my Belkin wireless router as an access point with a static IP of 192.168.2.18
I could then set up my IceBox2 with a static IP of 192.168.2.17

The default gateway would  then be 192.268.2.19 (ie. the modem's IP address).

Your modem device (probably your Belkin?) should have DHCP enabled to issue IP addresses to any PC's on your network, but anything like wireless bridges, wirleless routers that can be logged into & configured, should have a static IP so you can locate them reliably.  Keep a list somewhere so you know how it is all put together when you later need to add or modify anything.

Cheers,
Brian H
#48
General Discussions / Re: The IceMan Rocks!
July 25, 2006, 01:56:10 PM
As impact touched on earlier, the comments are controlled in nature - they are restricted to selected shows (mainly political ones) and to me, at least, don't descend to what I would call cheap shots - they don't resort to name calling or the like but instead attempt to put a different spin on things and seem to be aimed at being supportive of ICE... they have made me deliberately surf the EPG looking for hopefully witty remarks, which I certainly would not have bothered with otherwise.  Given the attempt on ICE by Nine, I think some of the remarks actually make a valid point.

I can understand that there are some who find this type of approach unnecessary, and I would defend their right to their opinion.  I for one am happy to have the "added' insights of the programmer/s, it makes the service a little more unique and breaths a bit of life into what must sometimes be a mundane task.

Perhaps a poll is in order?

Cheers,
Brian H

#49
As mtb suggested, I can't reccoment JustEPG highly enough (currently ver.11); it has been "worked" to accomodate ICE and really makes management of EPG display & timers very easy.  Worth a try, can always be removed if you don't like it, but I would be very surprised if this happened  ;)

Cheers,
Brian H
#50
Topfield / Re: Phantom recording
July 18, 2006, 01:12:21 PM
The only other option is a hrad reset - pull the plug from the wall & rests the Toppy; this usually fixes such issues, although re-creating teh timers from scratch is also a good idea.

Cheers,
Brian H
#51
General Discussions / Re: The IceMan Rocks!
July 13, 2006, 01:07:02 PM
...and the ones immediately before & after...    :D

Cheers,
Brian H