Main Menu
Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - tonymy01

#406
Quote from: monochrome on June 23, 2009, 09:19:35 PM
Same thing happening here.
Also - no listings for ABCTV HD in Perth.
Please read the many many posts about ABC HD.   There is no listings because ABC rarely has any real HD on that channel.  You can select the preferences in your account settings to copy SD to HD if you don't like the ABCHD guide looking so empty.
#407
XMLTV (General) / Re: Channel Number Confusion
July 01, 2009, 11:13:38 PM
The standard used for Aussie DVB-T numbering is called "LCN" which is logical channel numbering.   If you have some kind of option for that, select it.
#408
You can get the icetv xml yourself by following one of the help/guides:
http://www.icetv.com.au/cgi-bin/websupport.cgi?op=show_faq&faq_id=53&faq_cat_id=2
Regards
#409
PIMP is what ICE originally called the protocol/scheme to set timers, before they decided to go for the nicer sounding "Interactive" (actually, I think there was one more name in the middle there I have forgotten now...).
edit:
Prompted by my Widget history (I had to restart the ICE Widget *again* to get new data in it... have to do that some times... leave my PC on 24x7 and every now and again have to restart the Widget... pain in the coit that the Widget doesn't have an option to refresh/reload without the annoyance of quitting and launching from the pathetic WinXP Yahoo Widget interface... anyway, off topic)... the name between PIMP and Interactive was "ICETV Remote".
Regards
#410
Both Nein and Ten have that in their FTA guide.   And UPPERCASE PROGRAM NAMES (well, for Nein).
#411
IceTV EPG Content / Re: The Closer
June 20, 2009, 09:57:34 PM
What "machine" do you have?  Most PVRs record the timestamp of when the recording started, which should answer whether your machine was just running late, or perhaps the broadcaster schedule was running early for once.
#412
FYI: Beyonwiz
And the topfield-australia forums are still chugging away (the *old* Topfield support forum before itopfield took distributor/ownership of Toppies in Australia), but Beyonwiz discussions on there are rare because it is, well, a Topfield forum.  It is run by the same company that developed the Beyonwiz though, DPG.
And all the "itopfield converts coming across to find out why their new 7100/7150/7XXX is not booting/stuck on run/not upgrading" posts on the Toppie Australia forum is not a very good advertising space for getting a HD Topfield, that is for sure.
Regards
#413
IceTV EPG Content / NCIS eps
June 17, 2009, 10:21:20 AM
Hi ICE.
The last couple of weeks, my Wiz has been recording both eps of NCIS when the 2nd ep is a repeat.
Argh... I just looked at the guide, you have marked it as a repeat also....
Nothing to see here, move along :-)

(I figured I would still post this, as *plllllllllleeeeaaaase* enhance either the series recording option to support recording one channel only, not both HD&SD simultaneously... or enhance keyword recording to support more options like not recording repeats, supporting Genres as part of the keyword search string etc.   Both the series recording and the keyword recording methods have enough problems with each that either one is not a solution to solve the other the way it is currently!).
(Yes, I know, I can move NCIS back to a Ten only series recording, but I had this as a keyword when Ten was doing a bit of juggling between HD & SD in the dying stages of TenHD...  but this doesn't solve the problem for shows on Seven and Nine and SBS and ABC!).
#414
I edited my post above.   I definitely meant ABC1, not ABC2.   So my understanding is that ICE will look at what is unique for ABCHD vs ABC1, or what is definitely a HD program, and will have a guide for these only.   Since ICE is based in Sydney, this is their primary focus, and every other state is then attempted to be based off what they know about Sydney (so they attempt to delta other states later in the guide compilation process perhaps?).    So I guess the most accurate representation of ABCHD will be the Sydney guide?   Given that poor ICE has to do a lot of guesswork about what to put in the ABCHD guide (due to the poor information provided from Auntie most likely) it is probably a bit difficult to try to get the nuances of every region correct when even getting Sydney correct is a bit of a stretch.
ICE, correct me if I am wrong, I should not be speaking for you I suppose :-)

For anyone with only an SD setup, there is 99.9% no point in recording the ABCHD channel currently as it *rarely* has anything HD and rarely has anything actually different to what is on ABCSD.  All they do is upscale the SD channel to the HD channel most of the time, so recording the HD channel all you are doing is taking more HDD space on your PVR for no extra gain in quality due to the source being SD to begin with.      At least I believe this is why ICE has the strategy of "nearly nothing in the ABCHD guide"....

But to keep yourself happy, you can fill the gaps with an SD guide, there is a tick box in your account settings to do that, then the guide will be full and mostly accurate representation of what you are seeing when you are tuned to that channel.   But be aware that what you are seeing is identical as what is on the SD channel, and so you can save yourself a bit of HDD space to record the SD channel instead (I guess some might argue though that due to the slightly better bitrate of the 720p of ABCHD, the picture quality might be fractionally better on their setup then ABCSD.   This also depends on how well your STB or TV upscales ABCSD to your screen, does it do a better job than ABC's upscalers?  Maybe.

Sorry to repeat myself saying the same thing from a couple of different angles, but to me it seems pretty obvious why the ABCHD guide is the way it is and I am happy with how ICE is approaching it (assuming that ICE really does keep track of true HD shows and ABCHD programming differences as accurately as they can of course... I wouldn't be so happy if ICE kept missing stuff!).

Regards
#415
They are merely showing the show names that will be displayed.  ICE is trying to show the unique material that differs to ABC1 on LCN2/21 and/or the truley HD material.   There isn't a lot of either, hence the whopping big giant hole in the ABCHD guide.   Tick that box, it works fine for what it sounds like you want (a guide where you don't care what is HD and what isn't).

edited to correct my "ABC2" reference.  I knew I was going to type that wrong one day, given the mixes of 1s and 2s and 21s and 22s (and the changes ABC did with the channel branding).
#416
Wow, that is a pretty nifty feature!  This is what ICE should really be about too, getting those most recent changes pushed thru asap.
#417
Ahh, but do you have the "copy SD to empty holes in HD timeslots"?   ABC HD is empty for a reason, because ABC doesn't show much native HD material.   So really, if you don't see anything in the ICE guide, it is probably because ABC is simply upscaling their SD to the HD channel.   Only when there are unique or HD shows on ABCHD will you see something in the ICEguide without that other option ticked...
#418
Beyonwiz / Re: Cannot see Device
June 13, 2009, 11:14:39 AM
Quote from: melvy on April 05, 2009, 01:28:53 PM
UPDATE: I worked it out. I noticed the DHCP server lease time on the router was set at 3600 seconds which is how long I had internet access for. Extended that and Bob's your uncle.
Oh... that is a concern.   There was some question about this previously about whether the Wiz was re-negotiating the lease middway thru the lease period or just letting it expire, and either it is just not trying to renew, or your router is doing something funny here.   PRL (Peter on the ICE/Wiz/DTVforums) looked at this once I think, I just can't remember what the outcome was.
#419
Would ICE putting "(C) ICETV Australia" in every guide entry like Nein and Ten do make you happier :-).
#420
All ICE does is loads EPG up into the PVR.   It is up to how the PVR displays the EPG, if the PVR loads the ICE data into its EIT tables (normal scheme I have seen for the Topfield 5K & Beyonwiz), then the display method the PVR uses doesn't have to change.