Main Menu
Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - tonymy01

#391
General Discussions / Re: Ch 10 (ALL) choppy
July 18, 2009, 05:50:44 PM
Check your antenna and cables.
#392
Beyonwiz / Re: Remote timer recording from iphone
July 18, 2009, 01:04:06 PM
Sounds to me like you have multiple of the same channel in the PVR, with one of them having no reception.   It is probably recording 0 bytes (due to no reception) and not displaying in the list as a result.
#393
Soft padding my friend.   The networks never keep to schedule, always running over.   Enable soft padding on the Wiz, and unless you get a 2 way clash, bobs-your-uncle.   Of course read the padding topics over on the Beyonwiz forums and the new user FAQ for details on what the padding priority means (most run it with "priority none" so you don't get real timeslots overwritten by padding from another timer in the event of a clash).
Regards
#394
General Discussions / Re: Sounds stupid, but.....
July 13, 2009, 01:58:54 AM
But... if it is done on the PVR, then probably not.  I think it is still the case that you need to setup a series record on the ICE webpages or widget etc to get ICE to track your show.
#395
So you mean you have that option ticked in your account settings then?  Because if you don't, then you won't have much displayed in a week for ABCHD.   If it was showing stuff for you previously without that option ticked, then either you were looking at the one time of day that ABCHD really was showing some real non-upscaled HD material, or you had the FTA guide instead of the ICE guide.
#396
But not many (well any?) other channels have gaps, and thus the impact is really only for ABCHD these days.   This only copies the guide into the gaps, not overwrite what is already there.
#397
Beyonwiz / Re: Can't get EPG data.........?
July 11, 2009, 10:32:19 AM
Brian, I would hazard a bet it is your gateway or DNS is wrong.   This is why DHCP is often better, because what the router gives usually works.   Hand entering information can end up with your situation.   You said you had ISP troubles on the Beyonwiz forum, depending on what DNS you put in that can give LOTS of troubles!   Normally you would put the IP address of your router in here, as most routers will do DNS forwarding if enabled, but ensure your router is also setup correctly for DNS also.
#398
ICE originally *did* have the same thing with the commercial HD channels also.   But when the commercial channels started to multicast last year, ICE I think gave up in the end and worked on the SD and HD essentially like 2 independent stations, rather than just look for the splashing of realHD sourced material.
Disclaimer:
I am not affiliated with ICE in any way apart from seeing how it evolved over the years.   So my comments on how they do it are from a (slightly knowledgeable) end user perspective.   ICE may have different reasons, like they get given the guides from ABC for free but ABC gives no info for the HD channel, dunno.
#399
IceTV EPG Content / Re: ICEGuide for regional Areas
July 08, 2009, 08:09:14 PM
Look for the 100,000 posts on here regarding ABCHD (ok, slight exaggeration).   There is a very good reason it doesn't have much listed, and that is because it isn't broadcasting any (real) HD shows.   If you want the gaps filled, then tick the option in your account settings to fill the gaps in HD.
#400
Landline is 30cents isn't it (for a 1300 number, and free for a 1800 number, if ICE support is 1800)?
#401
IceTV EPG Content / "24" this Sunday.
July 08, 2009, 11:44:55 AM
In Melbourne anyway it will be on next week now, due to the footy, don't know about other areas (just read this on dtvforums):
http://www.dtvforum.info/index.php?showtopic=80075&st=0

#402
I am sure it says when you tick what it does.   Fills the gaps, no more.
#403
IceTV EPG Content / Re: ONE Digital
July 04, 2009, 09:22:05 PM
I think (in the beginning of OneHD), Ten was putting a video page up saying "go to One HD(1) or Ten(10) to watch this show", not for regulatory reasons, but more to give a small bandwidth boost to the OneHD & TenDigital sport (for anti-siphoning shows that were required to be shown on Ten analogue and thus Ten digital).    But the other night I was channel surfing on my SD PVR and noticed that OneDigital (i.e LCN12) had the same thing on as TenDigital, so don't really know what the caper is with Ten now, sometimes they put this banner up for simultaneous broadcasts, and sometimes they just get lazy and have the same thing on the 3 digital channels.
Regards
#404
Windows Media Center / Re: ICETV on Windows XP
July 02, 2009, 10:26:18 AM
No need to faff with anything, just bolt a whopping big HDD into the Wiz and it will provide you weeks of storage. 
Anyway, your choice I guess.   I just don't think having a noisy power sucking PC on 24x7 is any kind of solution compared to a dedicated PVR.   I tried the HTPC route years ago, and there was *plenty* of "faffing" with that everytime I wanted to play/do anything (not to mention it wouldn't go to standby and wake from standby, definitely wouldn't wake up for timers, needed the "Bill Gates BSOD reboot" on occasions etc).

Anyway, just look at the "what you need" or "compatible devices" info in the interactive front page.  Tonnes of info really: http://www.icetv.com.au/about/compatibility.shtml
And also cruise on over to the xpmediacentre forums ( http://www.xpmediacentre.com.au/ ), tonnes of info there, but good luck, what you want to do is really only for fiddlers/people with some nous to get things up and running, and people that want to do a bit of forum research to learn/tweak/whatever.
#405
Windows Media Center / Re: ICETV on Windows XP
July 02, 2009, 09:54:11 AM
??
Are you asking for a server application so your Wizes can point to your PC instead?  The ICE IP/URL is hard coded in the Wiz.   There is interactive clients for Windows.  The Widget & a web browser.
I don't really get what you are asking actually.
Slaps forehead, as I was reading another media centre thread (lllllots of those LOL) I realised you are probably asking to have your PC operating as a media centre, and record with that instead of the Wizes.   Not quite sure why you would want to do that though, the Wiz is pretty reliable, the interactive works well, and by the sounds of it, you have a couple of them, so plenty of HD tuners to go around, where as depending on the kind of PC you setup, you may only have 1 tuner, have all the quirks that the media centre people complain about all the time (channel names, manually padding timers, local media centre series record doesn't like some of the flags etc).
But WMC is avail in an XP form, Vista form and "Windows7" form I believe if this floats your boat.   Else you can certainly get ICE downloaded with wget as XML and use this data for any application you can dream of.   It isn't interactive as such, it is guide data only, but many solutions out there provide timers and other features from a good set of XML data if you don't like the way Interactive currently works.