Thanks for the info. I've also posted on the beyonwiz forum to see if others have the same issue. I think the T3 data is also on a different server so it may have not been updated fully.
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Show posts MenuQuote from: csutak40 on November 07, 2015, 10:59:52 PMDon't read the manual, the beyonwiz forum has the best info. The help screens that show what the buttons do are also quite good.Quote from: peteru on November 07, 2015, 10:27:50 PM
Actually, that configuration is perfectly OK. IceTV timers and AutoTimers will not interfere with each other. You can have both and as you have seen, autotimers can do things that IceTV can not.
OK, more RTFM!!! (much more!) ::)
Quote from: csutak40 on November 07, 2015, 10:49:50 PMYou can do regular expressions in some of the beyonwiz auto timer filters.Quote from: Dave at IceTV on November 07, 2015, 07:23:59 PMQuote from: csutak40 on November 07, 2015, 05:32:58 PM
I would like to record Studio 10, but only the Saturday show (as that is a compilation of the whole previous week, which is more than enough for me) This was very easy to set up in TED - is there any way of doing it with IceTV?
Did you mean Sunday's show because I can't see it on Saturday.
From what I can see Studio 10 is on the same channel at the same time 6 days a week all as new episodes and all with the same synopsis. Given that there appears to no difference in the guide or channel quality or time for the various day's showing of Studio 10 I cannot see any way using IceTV to set Studio 10 to record just one particular day's show each week.
I didn't even notice it being on on Sundays too. ;) It is definitely on on Saturdays too, been taping that one for ages, taped it this morning too, with the Toppy
Got another question. In Ted one could set up "regular expression" searches. Can one do something similar in IceTV?
Quote from: peteru on November 07, 2015, 10:27:50 PMI wasnt suggesting they would interfere, I just meant you would record it twice as they are independent.Quote from: simoncasey on November 07, 2015, 09:29:48 PMJust don't have an autotimer and icetv trying to record the same show as mentioned.Actually, that configuration is perfectly OK. IceTV timers and AutoTimers will not interfere with each other. You can have both and as you have seen, autotimers can do things that IceTV can not.
Quote from: csutak40 on November 07, 2015, 05:32:58 PMThere is no easy way with icetv as it is listed as the same show every day. The FTA guide differentiates by calling it Studio 10: Saturday.
OK, now that I am in the process of weaning myself off my beloved TED/S, I have a question.
I would like to record Studio 10, but only the Saturday show (as that is a compilation of the whole previous week, which is more than enough for me) This was very easy to set up in TED - is there any way of doing it with IceTV?
OK, I know, I could record every day and just delete them all.... ::)
Quote from: csutak40 on November 05, 2015, 04:17:02 PMIt was a bit scary even when I'm not new to the system.Quote from: simoncasey on November 05, 2015, 07:51:52 AM
Yes, I always get the same thing if icetv password fails. Ie the front panel shows icetv login error but no tv picture. It happens if the icetv login fails while the device is in standby and it stops the beyonwiz coming out of standby so no picture.
If you press exit a few times it will go back into standby and then you can switch it on normally.
Yes, thank you. That is what I ended up doing. Bit scary when you're new to the system ::)
Quote from: JPP on November 05, 2015, 08:41:04 AMYou've paid for the month subscription so that is correct. The other posters have just updated their autorenew settings, they haven't paid yet.Quote from: ChrisW on November 05, 2015, 08:37:23 AMNot for me. "Your subscription will expire on December 05, 2015 (in 29 days)."
So it looks like the overnight payment facility change has just reset everyone's expiry date to today, and by updating the card details it will revert back to next week, when the first payment should come out.
Quote from: mkwilson on November 05, 2015, 07:47:49 AMYes, I always get the same thing if icetv password fails. Ie the front panel shows icetv login error but no tv picture. It happens if the icetv login fails while the device is in standby and it stops the beyonwiz coming out of standby so no picture.Quote from: csutak40 on November 05, 2015, 06:03:11 AM
Hmm... I wonder... Being new to Beyonwiz, I'm not sure what's caused by what. I just discovered that the LCD screen is saying that it needs the IceTV password, I wondered why - thinking, don't tell me that I'll have to type it in every 5 minutes. However, I can't wake it up, can't get anything on the TV screen regardless of which button I push. I just decided to think about it tomorrow, but now wonder if this is the cause?
The IceTV thing shouldn't affect the TV connection. It's possibly a resolution setting that is stuffing up the HDMI handshake. Have you tried switching on and off at the rear power switch? Or switching from to a different input on the TV, then back to the input for your Beyonwiz (sometimes does the trick for me).
Quote from: warkus on November 04, 2015, 07:06:49 PMI'll admit I haven't seen the choice article in detail and agree it is odd. The fact that they were rated roughly the same makes me think the assessment was based on functionality that the two share and are similar in - and very little credit would go to the T4 being able to do each function faster or better etc. Also, the T4 is roughly 30% more expensive than a T3, so there is that.
Ok, well that's a fair call I guess Simon, it does depend on whats important to you i suppose, looking at it from your perspective you have a valid point...
Having said that, I'm looking at it more from a review point of view in terms of differences.
There is NO WAY that the T3 should have rated higher than the T4 and there is NO WAY i would ever recommend a T3, like ever, over a T4...
I think choice have it very wrong...
Quote from: warkus on November 04, 2015, 05:45:24 PMInteresting the value those things are to different people:
So hardware quality aside lets look at the T4 differences... Well compared to the T3, the T4 has...
I really am amazed he couldn't notice any difference... They are like chalk and cheese.
I've been testing a T3 to train up my wife on it before I purchased the T4, and even she has noticed a huge difference.