Main Menu
Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - tonymy01

#316
You have to tell it which device the timer goes to in the interactive screens for the series recording/keyword/whatever (which I think you are already doing).   You can set a timer for a specific device, or for all devices.   I was a bit confused I guess by your original description, sorry about that, I thought you weren't getting anything at your new device.   When you setup the ICE in the Wiz, you have to choose the device in the Wiz EPG settings.   This is how ICE knows who you are.
#317
Did you go thru and check your account settings in the Wiz, there is an option to check?   If that fails, then did you setup your IP correctly, did you do DHCP (which normally gets all the correct parameters, and you usually don't have to do anything else) or did you put in IP addresses manually?  If the second, can you ping it from a PC on the same network?  If you can do that, but the ICE check fails, then it is probably either your gateway or DNS settings are not setup correctly.
Regards
#318
The reason I jumped to Beyonwiz rather than upgrade my 5K when the 7000 first came out is that the 5K has a slave USB port, which can be used to transfer via a PC (or in the case of the work PeterU has done, SLUG/NSLU2 or ICEBOX), but the 7K had no LAN connections and required sneaker-net for the host USB port.    Not to mention the huge reams of bugs it had (and still has), no TAPs etc.    The Beyonwiz is what the Topfield should have been, right from the start (LAN, network streaming etc).   The 7100 is a small jump to the 7K and finally provides network connectivity, but still has many of the issues of the 7K, the 2400 is finally starting to look like a worthy Toppy again.

Short answer: No.
#319
Looks like you will have to chase it up with Strong directly also, as it is them that produced the packaging, is it documented in the manual at all?
#320
Topfield / Re: Wireless
October 23, 2009, 09:32:48 PM
Wow, a thread jump from 4years ago.... you will have to clarify your Topfield model, this was talking about the SD Toppies that (after some great efforts by PeterU, Steve et-al) required a SLUG or "ICEBOX" to get the USB to a box with ethernet running ftpd-topfield (so it could be ftp'd).
#321
Certainly this is a show I get interactive to record on my Beyonwiz for only new eps, and it works fine, but have no idea all those WMC terms flying around what they have to do with Interactive (now I have a vista box, I have had a taste of a media centre experience... albeit without *any* EPG thanks to no EIT and I don't want to be stuffing around for days setting up ICE for it when I won't really use it that often).   OT:But WMC is pretty polished, I am surprised actually... my new PC was my first exposure to it, and it is certainly ok for what it is (a small bit of software on a PC).
#322
I cleared out the last search I did this morning for something, and the widget was showing the Don Lane show, but I have had it in the past where the data eventually expires over a number of days if I haven't rebooted the PC in days, so would be interesting to know just how it ticks (yet another great ICE mystery).
#323
I was going to write a new thread about the exact thing (the trying to view what is on a channel) yesterday.  I had it all typed up that they should have a drop-down channel filter on the guide page so you can just view a channel, as often I am looking at the guide page trying to work out the show that is after the one you are looking at (say, want to see what the following 3 shows on that channel are) and it is a nightmare to find, and I have had this issue more than once.   Especially since there is subtle variances between names that first throw you, e.g. ONE HD, ONE , SBS ONE.   It is quite cluttered the way it is currently arranged list style (a different kind of timeline style would work though, much easier to visualise show lengths when graphically shown).
And then was about to click send, and realised the Widget does exactly this (well, it is sorted in channel, and then timeslot, rather than just timeslot order)....  The problem being that with all the new channels, the widget is too long for my screen in 5 show/timeslot view, so I have it in 3 program view which significantly reduces my ability to see at a glance what is happening for the night.

I would still like a graphic representation to show all channels, multiple progs, so you can more easily see overlaps and how you are going to miss something because you only have 2 tuners and 2 shows on different channels overlap part way thru.   I guess I resort to my PVR's horizontal timeline view guide for that...  but I want to see this from my (any!) PC at times.
#324
it is probably a keyword recording for a show that got rescheduled. It seems ice are natorious for not cleaning up scheduled/transferred timers once they do this. Do you have RSS feeds setup? If you do, you end up with a nice history of recs and faves to go back and look up (well, using outlook to gather the feed you certainly do).
#325
ICETV is already "retailed".   I think your thread topic is not really worded correctly (although I guess being buried deep in the Windows 7 sub forum kind of explains what the topic might be about).   Isn't there an identical topic on this already?   You know normal readers view these, so all these views are from forum regulars that like to view every new post (I simply click on the "show unread posts since last visit" link, there aren't many posts a day to catch up on.   The only people who can possibly answer this are ICE I would expect, so the number of views bears little relevance to your question getting answered.
#326
Sorry, but how has your IP address configuration got anything to do with ICE?   If you setup the correct IP address, mask, gateway and DNS (and they all MUST be correct) then your Toppy is free to get out to the net to seek the ICE server.  If your toppy can't do that, then you are pointing your finger in the wrong direction.
#327
For me now, it is all good at the moment, the only donuts I have are for shows from next Tuesday late evening onwards (i.e. the >5x24hours period).
edit:
I tell a lie... "Ashes to Ashes" is not uploaded (according to ICE), and "Nip/Tuck" (nearly the same time also).   I missed Ashes to Ashes two weeks ago for some unknown reason.
When looking at my RSS messages (for the missing ep), I see:
Mon, 12 Oct, 9:35pm - [REC] Ashes To Ashes  Posted on: Mon 12/10/2009 22:02
Wow, fat lot of good that was (and the PVR is literally on all night on Mondays especially)   All the other "Ashes to Ashes" come though quite late as well (I have a bit of history there).
28th September is similar (but that time I am sure I got the ep sent).
For the 5 Oct Episode, the rec came thru at 4am the on the 4th (my 4am wakeup timer) and again at 23.55.
For the 19 Oct Episode, the rec came thru at 7.48am 13/10... so that one was well in advance... but the donut is scarey, I will check the PVR now.

Ok checked  the PVR, and both Nip/Tuck and Ashes to Ashes are there, so don't know why ICE has donuts.
#328
Yeah, what happened to Eureka?  I went to watch it last night, and got some garbage instead.
#329
IceTV EPG Content / Re: Melbourne EPG data
October 05, 2009, 02:04:44 PM
Quote from: berlinchair on October 05, 2009, 01:04:53 PM
blip - hmmm, you might be onto something there, I noticed it hadn't changed the time itself so just changed it myself...... may have shot myself in the foot!!!
Never a good thing to do on a PC system that has to do calculations and date/time arithmetic on both GMT and localtime information.   No wonder you are having the hassles!
#330
IceTV EPG Content / Re: Melbourne EPG data
October 05, 2009, 12:35:59 PM
My listings.xml looks like this:
<programme start="20091004130000 +0000" stop="20091004150000 +0000" channel="3">

Regards