Main Menu
Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - tonymy01

#301
Topfield / Re: New Topfield 2400 Firmware Update?
November 16, 2009, 10:38:21 PM
This is the ICE forums.   Have you posted on the actual topfield forums ( http://www.itopfield.com.au/forum/ )?
#302
Which topfield?  itopfield (toppro I think they are called are the current support).   But both things you mention there are very common for that model unfortunately.
#303
But ICE was kind enough to put repeat flags on the Torchwood that ABC2 is showing given Ten(HD RIP sniff) showed that only over the last 2 years.
#304
Topfield / Re: What have I missed?
November 04, 2009, 06:32:56 PM
I can't give you TED/S support as I haven't used it in a couple of years (maybe more?).   I have been using PerlTGD on my SLUG  since that time, and much better option (not tied to a PC, not tied to some VDS closed source code that gives cryptic error messages about "error 23 in line 2002" or whatever they are).   John has done an admirable job in TED/S, no doubt, but I think the PerlTGD solution is a lot better for me.    Gully still posts on the Beyonwiz forums if you want to PM him about it (he seemed to know what all the VDS errors were about, perhaps John gave him some support arrangements/info in the past).
I just don't think you are going to get many people who use/can support TED/S here on the ICE forums.
Regards
#305
Topfield / Re: What have I missed?
November 04, 2009, 08:51:24 AM
They just got there because if the TAP doesn't have any channels in the inifile, it adds 5 dummy ones for you to edit (hangover from the first days of the TAP, and just the way John provides an inifile for you that doesn't have any entries for channels).  But because they don't correlate with anything, the TAP gives all those "can't find channel" errors, which doesn't help at all and slows it down.   Just like you originally added 72 to the tap, you can delete those, but I think last time I tried, the channel info in the TAP has to start from the number 1 (so you could move 11,12,13,14,15 there and remove the 1st 1, but then you have that hole to fill near the end, so will require renumbering some), and the number of channels entry needs to be reduced to the number the number of channels listed or else it will create dummy ones at the end this time.

As for TED/S, this has nothing to do with the PC.  Read the errors again, they are from the TAP:
2009/11/03 17:07:54-could not open GMT TZfile in /ProgramFiles/zoneinfo DIR
2009/11/03 17:07:55-could not open posixrules TZfile in /ProgramFiles/zoneinfo DIR
It is the zoneinfo files related to TAP timezone setting and getting your date/time changed.   You are meant to have a zoneinfo directory off the Topfield ProgramFiles directory with those zoneinfo files that came with the TAP in there.   You can see it is complaining about two missing files, I suggest you copy the ones it is complaining about into that directory.

Regards
#306
Topfield / Re: What have I missed?
November 04, 2009, 12:51:01 AM
You should fix a few things while you are here.
1.  Get rid of those dummy channel entries in the beginning of the ini file (you will have to rearrange it a bit to either renumber them all, or whatever).
2.  You have this error:
2009/11/03 17:07:54-could not open GMT TZfile in /ProgramFiles/zoneinfo DIR
2009/11/03 17:07:55-could not open posixrules TZfile in /ProgramFiles/zoneinfo DIR

This is bad*.   You are using the latest version of my TAP by the sounds of it, which really needs these files in the zoneinfo directory to perform properly for any time related stuff.
They would have come with the EPG_uploader3.26beta6/3.27 (or whatever version you ended up with).


Remember, EPG_uploader, if you have timeshift disabled, will not upload new EPG (or timers) on a very regular basis (once every 12hours, or when the "reload hour" of the TAP is set).   It has two settings, a "new file frequency check timeshift enabled" and timeshift disabled.    You don't want it to check for new files every 2minutes when you have timeshift disabled, it defeats the purpose of having it disabled (which presumably is due to people thinking the discs spinning down is somehow going to increase the life of the PVR).   I don't run the PVR 24x7, and leave my timeshift on while on (i.e enabled) to give me 100% PVR functionality whenever I leave it on, and means uploading timers from EPG_uploader is relatively instantaneous (ok, can be up to 2mins wait).

edit 200: I do see it checking for files every 5mins though, so not really sure why it wasn't getting anything from TED, must be your TED settings I would think.

*(mind you, I see:
2009/11/03 17:07:55-Determining GMT offset and manual time is currently 0xd762 17:07:55
2009/11/03 17:07:55-Setting Flash UTCOffset to:660mins
2009/11/03 17:07:55-Setting Manual DATE to 0xd762 & TIME for emma2 & front panel time: 17:08
which means it is setting your manual time OK, I am a bit surprised about that really).
Regards
#307
Topfield / Re: What have I missed?
November 03, 2009, 05:49:02 PM
That is the boring TED/S log.   Do you see 7TWO getting stuff set in TEDS?  Do you see anything in the Topfield EPG_upload log (assuming TED/S is actually creating timers).
#308
XMLTV (General) / Re: MythTV 0.22 - ICE TV Support.
November 03, 2009, 04:39:22 PM
Aha, ok.  Sorry about my misunderstanding also!
#309
XMLTV (General) / Re: MythTV 0.22 - ICE TV Support.
November 03, 2009, 08:40:45 AM
?? This is an ICE forum, why are you talking about scrapers?  If you go to the account pages, go to one of the help pages, it gives instructions on how to download ICE data as XML, you don't need to do any scraping (it is literally one command).
#310
Topfield / Re: What have I missed?
November 03, 2009, 12:00:36 AM
But does it find any?  You probably don't need to delete that line now you added it, it is just that LCN info is automatic, you don't need to change anything on the Toppy.   As long as you have a 72 in the Toppy, and TED is creating TGDs with "72" in them for the timers/EPG, then all should be well.   So is it?
What do the logs of TED/S and EPG_uploader show, EPG_uploader would have logs showing timer failed if TED is sending them with incorrect info?  Do you see any fails when you upload and the TAP loads the timer file?  The TAP has a popup/banner at the end to show success/fail/deleted.
Oh, and did you restart your Toppy since you scanned for new channels (EPG_uploader maps out your channels from 0 to whatever you have stored against their LCNs, if you add any new LCNs while the TAP is running, it may not notice it and so give channel errors in the logs as it can't find any "LCN72" in the stored table it builds when it loads).
#311
Topfield / Re: What have I missed?
November 02, 2009, 08:15:29 PM
I have explained a few times, you don't need to download the XML to find out your number, simply go to your account page where you get to tick on/off the various channels, then view the source of the webpage, and you will see it down a bit when you start finding the html info in the source related to the section where you tick on/off the channels.   

Please don't edit your EPG_uploader.ini file (please!).   When it finds a new LCN in the source data, it will add it automatically.
#312
But Mark, where are you located?  Some dodgy broadcasters don't know their system very well (I was going to say something else related to human anatomy, but decided to leave that one out  :) ), and often do silly things like adjust the GMT clock instead of the localtime/GMT offset when DST kicks in, or simply don't setup the NTP properly on their broadcast systems.  A few years ago, even in Sydney, Nein was 15minutes out for about a week!
But now in Sydney I notice it is very good, they have finally got their act together here, regionals may not be so good in this area yet.
Regards
#313
Topfield / Re: What have I missed?
November 01, 2009, 08:16:04 PM
Have you got 7TWO ticked on in your profile?
#314
A couple of points:
1.  Did you have your wiz powered up at the time (most of us setup a daily "view" timer at an hour that won't cause conflicts to have the wiz wakeup on a daily basis to get EPG and interactive timer events?
2.  Did you wait the ~20mins that it can sometimes take for the polling cycle that the Wiz does to the ICE servers (you can see this in your Wiz ICE status info)?
Regards
#315
I think you can get perlTGD working on the icebox2 (I have it working on my SLUG, which isn't that much more grunt/ram than the ICEBOX2).   I guess if you don't like (or haven't tried) fiddling with linux before, it may end up being a very rocky (and pioneering) road to achieve it though...
Regards