Main Menu
Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - srto2

#31
Getting Help / Re: Recording Failures
October 12, 2023, 05:02:41 PM
Quote from: IanL-S on October 12, 2023, 04:25:33 PMTVHeadend can have difficulties when a timer is updated by a minute or so (for me this mostly on ABC); it apparently deletes the timer and can either schedule the recording of the previous episode of the program or the next instance of the same episode. I have seen both happen. In each case it results in the program not being recorded at the time intended. It is IceBox specific, the same programs record properly on my Toppys and Beyonwizs.
I think there will probably be a fix buried somewhere in the kludge that is LibreElec + TvHeadend + Kodi +Ice.  I have trawled all the relevant wikis and forums and ended up being amazed that anything works at all.

When I decided to repurpose a bunch of hardware, two pc's and Rpi, I recreated everything from scratch a few times and never experienced many obvious problems until installing the ICE specific version - which wouldn't install at all until Daniel Hall issued a patch. Transferring recordings from one box to another is ridiculously stupid but I have a work-around for that.  The initial straightforward copy of a recording ends up apparently "deleted" by TVHeadend... 

I'm using the "Amber" skin rather than the generic Kodi skin but the occasional recording snafu seems independent of that at least. I experimented with different skins to see whether any of them caused major issues.   The "Amber" menu structure is better but still suffers from Kodi's inability to implement sensible, consistent, remote control functions.

Having said all that I've come close to thinking that, as we use streaming options a lot now, maybe the ancient method of reading the guide and manually setting timers might suffice but I'll persist with the BYOB path for now.  Often now I'll set a timer to record a series and then binge the lot online anyway.
#32
Getting Help / Re: Recording Failures
October 12, 2023, 02:53:34 PM
Quote from: MD on October 11, 2023, 08:15:37 PMHi Rob,

It looks as if you are a BYOB user and I see you are using our tuners so could you tell us your setup as there are no known issues such as you described now we have new SSDs?
Thanks MD.

Well, it has happened before, and Daniel posted on 31/8/23 " We have seen an incorrect error come back now and then if the IceBox has been off or a while and then turns back on. We are actively working on a fix and have some ideas as to why this happens so hopefully we can get it resolved asap. "

I have two BYOB boxes, a Lenovo M920Q (i7, 16GB, Samsung 1tB SSD) and a Lenovo M700 (i5 8GB Crucial 1tB SSD).  When the M700 came up with the errors I switched to the M920 and the same errors returned. At least one of the machines is always up these days.

I appreciate that intermittent faults can be excrutiatingly difficult. The only thing I can see in each case is that the guide time for the particular program seems to be off by a minute or two when the problem has popped up.

And, for info, I have three Ice/Hauppauge tuners.  I purchased the third for testing a Raspberry Pi (4B) implementation of LibreElec/Kodi with the ICE XMLTV guide feed.  That works exceptionally well, but the third tuner does not behave normally when used with either of the Lenovo boxes.  It is fine from a cold boot but fails to initialise if the box is resuming from suspend mode.  The first two tuners don't exhibit the problem.  Not an issue with the Pi of course.

But if Daniel is right, could even an otherwise apparently A-OK tuner introduce some corruption when it is initialised following resumption from suspend or even a reboot?

Regards, Rob


 
#33
Getting Help / Recording Failures
October 11, 2023, 05:21:36 PM
I am still seeing these errors:  This is the third similar error this week.

Foreign Correspondent

'Series 2023, Episode 24'

ABC TV HD, 8:02pm, Thu, 12 Oct 2023, 34 minutes

Recording Options

This show is part of a series recording but will not be recorded. (There were not enough tuners to record this airing. It has been moved to the next airing on 2023-Oct-15 12:58:00)



8.02 PM??  With four tuners, I'm only recording from two networks this Thursday.  So is the problem with the Ice PlugIn/TvHeadend/Kodi/LibreElec or is it at the server end?

I can, and will, set a recording locally but the fundamental reson for subscribing in the first place is to, well, set and forget, and have the freedom to set recordings remotely.

I'm trying to be patient with these issues but would appreciate feedback, with some indication of any rectification progress.  I'm retired now and have limited funds for luxuries like my ICE subscription.

Regards, Rob
#34
IceTV EPG Content / Re: Monday EPG Data Missing
September 08, 2023, 10:06:45 AM
Quote from: robertdowdell on September 08, 2023, 08:43:15 AM
Quote from: IanL-S on September 08, 2023, 08:19:22 AM
  • Done a full EPG download - click on the KODI settings [top left of screen], then select "Add-ons", then select "My add-ons", then select "Services" [IceTV should be build 0.1.50], the select "configuration", and "Force full guide update" should be highlighted, click on OK.
  • Turn the IceBox off.
  • From you IceTV account, resend all timers for the IceBox (this is done under the "My Recorders" tab, in settings).
  • Turn the IceBox on.
This reminds me a bit of some of the early ICE days...  I've been using ICE since the first ICEBox (the hacked ASUS router).

I just performed the above procedure and there is still a bunch of yellow exclamations for Monday and Tuesday.  I don't, obviously, know where the glitch is occurring but my gut thinks a bug or bugs in the ICE plugin.

I don't know how many techs are working on these issues, but I suspect Daniel Hall is run off his feet; we can all maybe just be a bit patient while bugs are (hopefully) squashed for good?
#35
Quote from: Daniel Hall at IceTV on August 31, 2023, 01:39:04 PMWe have seen an incorrect error come back now and then if the IceBox has been off or a while and then turns back on. We are actively working on a fix and have some ideas as to why this happens so hopefully we can get it resolved asap.
Thanks Daniel.  Since I first posted, "Antiques Roadshow" has re-established itself correctly, but ABC News is still saying "There was an error scheduling this show to device IceBox. Could not find airing in the guide (no shows returned), cannot schedule timer. This show is part of a series recording."  Just for fun I'm about to reboot the box to see if that makes any difference.

Edit:  Nah.  Reboot only initiated another "Failed Timer" message...
#36
Quote from: IanL-S on August 31, 2023, 10:44:36 AMProblem 1
The first thing I would to is to check that all of the tuners are activated. Assuming you are using an IceBox do this using TVHeadend server. You open web page with the following URL:
http://{ip address of my icebox}:9981/

You then select configuration then DVB inputs, you should then check that for each tuner the DVB-T is set to "enabled". I have had USB tuners that have become dislodged, both on IceBox and Beyonwiz. If you have a Beyonwiz then check the settings to make sure that each turner is set to DVB-T or DVB-T2.

Problem 2 This happens when a PVR attempts to set a timer for a time when there is no EPG data present. I have this happen frequently with my Topfield 7100+ and occasionally on the IceBox. The timer should be set once the EPG data is available.

Hope this helps

Ian

Thanks Ian.

I'm talking about a BYOB IceBox with 2 x dual tuners;  I am confident that each tuner is enabled and has been thoroughly tested - ie the hardware is A-OK. Perhaps IceTV has a crystal ball that says on Sunday 3/9 my tuners will die?? 

I think Daniel's response might explain it except that I can't create either timer for that day even after deleting then trying to re-create them so there's a glitch there, for that day only it seems.
#37
Help!  There seems to be a Sunday 3/9/23 ban for me!   

1. Antiques Roadshow:  I have four available tuners but "This show is part of a series recording but will not be recorded. (There were not enough tuners to record this airing. It has been moved to the next airing on 2023-Sep-04 11:00:00)"
 
 2.  ABC News:  "There was an error scheduling this show to device IceBox.Could not find airing in the guide (no shows returned), cannot schedule timer. This show is part of a series recording."  Well, it is most certainly in the guide...

So with four tuners available, and nothing else to be recorded that day, the system has said "I can't do that, Dave",  - or Rob in this case...

This is not, of course, the end of the world, but a glitch that might be worth investigating.  I've deleted the timers and re-established them but with the same weird result.
#38
General / Re: Screen Blanking
August 14, 2023, 03:51:07 PM
In /Kodi Settings/System/Display there is an entry where "Delay after change of refresh rate" can be turned on or off.  I wonder if that is relevant to your HDMI processing - with any change of resolution as you scroll thru menus?

My setting is 'off' and the (BYOB) Icebox HDMI is switched to the TV via my AV receiver.  I can't check now but when I can I'll look to see if there's any noticeable difference.
#39
General / Re: suitable alternate remote for ICEbox?
August 01, 2023, 10:20:13 AM
Quote from: TimC on July 29, 2023, 07:33:09 PMYou can get instant record via the Flirc by selecting the Flirc's "Microsoft WMC" controller.
Programming the Microsoft WMC controller's Record button gives you Instant Record.
Thanks for that!  Much appreciated...
#40
General / Re: suitable alternate remote for ICEbox?
July 24, 2023, 01:39:38 PM
Quote from: TimC on July 23, 2023, 03:04:28 PMSometime (Probably the next Ashes Test) I am planning to take a Keyboard and plug it into the IceBox and find out what each key actually does and build a table so that anybody can set up their own controller. Hopefully I won't break anything along the way.


No need to wait 'til then.  Probably more rain anyway...


Using a Rii wireless mini keyboard, I get the following:

A = Audio Delay Adj +/-
B = Timers
E = EPG
F = FF (x2,x4,x8 etc)
H = Channels (List)
I = Info (Also M)
J = Radio Channels (List)
K = Recordings
M = Info (also I)
O = More Info
R = Rewind (-x2, -x4, -x8 etc)
S = Power Options
T = Subtitles
X = Stop Playback

Page Up-Page Down = Channel Up-Down
Number Keys select LCNs
Arrow Keys same as RCU
Enter = OK
F8 = Mute
F9 = Vol Down
F10 = Vol Up
ESC = Back, Ice Key, gets you out of submenus or back to the main Kodi menu.
SpaceBar = Wakeup (from suspend), also Pause + Timeshift Bar
Play,Pause,Stop (on the Rii Keyboard) as per the Ice RCU

I have used a Harmony Remote (650) to do it all, by substituting a renamed Beyonwiz DP-P1 as the "device" for the IceBox "Activity" using the Beyonwiz functions (adding extra soft functions as required), by programming a Flirc IR-USB dongle.

The only function that I feel is missing, at this stage, is a Red Button, for instant record.  Not a big deal though, it's quickly accessible from the Kodi menus.  Remapping can probably achieve that.  Probably after the next Test...

I have thrown my ICE RCU away now!  Not really - but I can certainly do all I need without it.
#41
General / Re: IceBox Roadmap
July 22, 2023, 12:31:48 PM
Quote from: IanL-S on July 22, 2023, 09:19:36 AMIf so, it may be possible to use the RCU to boot up the IceBox. May depend on the chipset.
For what it's worth, my BYOB (Lenovo Mini/Intel) wakes up with USB keyboard, wireless or plugged in, with the "s" key or the "spacebar".  When running, the "s" key brings up the power options menu.

But if the box is already running... the spacebar becomes a pause key and pops up the timeshift bar..

Using a Flirc IR-USB dongle, I initially incorporated wakeup and shutdown into a Harmony RCU by sending "spacebar" to wake up and "s+enter" to suspend, provided that the last thing you did with the power options menu was "suspend".  But because you can't always guarantee the power state of the Icebox, the results are obviously hit and miss, so I deleted the power on-off sequences.  And I'm currently leaving my Icebox running except when it seems OK to suspend manually. 

The Harmony RCU satisfactorily controls most of the Icebox functions and doesn't suffer from the contact bounce that my Ice RCU does. And I'm comfortable with the system overall.  Most of the time...

So my ask for the roadmap revolves around RCU standardisation (to allow IR and RF) and more sensible (normal?) power functions.  Not necessarily in that order!



#42
Quote from: DeltaMikeCharlie on July 19, 2023, 10:12:30 AMPerhaps someone else may have some other ideas.


My box is a BYOB Intel/Lenovo so what I have observed may not be related in any way to the stock IceBox, per-se.

This is how it is for me:

The box suspends to a low power state from the shutdown/suspend menu.  The tuners also shut down... they're plugged into USB3 ports.

The system will not suspend or shutdown via the Idle Timer.  But will wakeup for a timed recording or the wakeup timer.

The system will not wake-up using the RCU but will wake up with a USB keyboard (space-bar, for example).  And it will wake up when using a Rii mini wireless keyboard with its dongle plugged into any USB2 port.  Either the space bar or the home button (at least) will wake up the system.

My RCU also seems to exhibit contact bounce on occasion,  in any Kodi page or any menu.  Particularly irksome when you want to skip 3 minutes and get 10...

I have ordered a Flirc dongle so will see what that can do for me when it arrives.  I don't have any serious Linux know how so time will tell.  I may need help with keymapping.
#43
Hi Ian,  I've been a bit snowed under, so no reply 'til now.  My machine is not showing the TvHeadend error (now) when rebooting either.

I don't have any issues with getting around Kodi - but I do miss my currently deceased Beyonwiz T4 (let alone any or all of my Toppys, long gone) but I have other issues with either LibreElec (or the IceTV plugin) and my Lenovo mini PC.  I'll collate the most significant of those and start another topic when I'm confident it's not "finger trouble" on my part.

Meanwhile the other crazy thing is that SSH worked until I (probably unneccessarily, given my locked down network)  changed the default pasword.  Something else to think about...
#44
Quote from: IanL-S on July 06, 2023, 08:28:03 AMLast night I needed to reboot my IceTV IceBox and noticed that at the end of the process there was a message about not being able to contact a remote server. Rebooted several times and got the same message. On the guide settings page it is reported that the IceBox is still calling home. My Week listing indicates all timers have been successfully set for the forthcoming week.

There were 4 failed recordings on Saturday (due to insufficient disk space) but nothing that would explain why I am getting the message on boot-up.
Did you mean to start a new topic for this post?
#45
I do believe the new image is working.  Ice is setting up now!  Many thanks MD, Daniel and DMC...