Main Menu
Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - Mantorok

#31
Hi warkus,

I've got the same feeling.  Daniel said he would try to release the firmware yesterday but there's no sign of it. I was hoping that the next firmware would make it stable enough that I could trust it to be my primary PVR.  I was also hoping that if the IceTV EPG can be resurrected with a new owner then the Skippa could live on.

If the Skippa is in fact defunct then why not open source the firmware and put it on GitHub or something. Maybe some developers could move it forward since IceTV can't/won't!

BTW, is it possible to install the firmware other than over the internet? eg. via USB drive
#32
Quote from: Daniel Hall at IceTV on October 10, 2015, 01:29:28 PM
Hi Guys,

I can confirm that this is definitely a firmware bug, AutoSkip has not been disabled on any boxes.

I tried to get the next firmware released yesterday but was unsuccessful, I will be able to try again on Monday to get it released.

Hi Daniel,

How are you going with getting that new firmware released?

Regards,
Mantorok
#33
SKIPPA / Re: IceTv in Voluntary Administarion
October 12, 2015, 03:53:45 PM
I also voted YES even though I had about 3.5 years of subscription left for my Beyonwiz and a lifetime subscription for my Skippa.

Without the IceTV EPG and Interactive I'd give up on FTA altogether and probably just subscribe to Stan/Netflix or, heaven forbid, Foxtel!
#34
SKIPPA / Re: Random Reboot while changing channels
October 11, 2015, 06:48:10 AM

Got another reboot last night so it doesn't seem to be related to the Digital Audio setting.   :-\
#35
SKIPPA / Re: Random Reboot while changing channels
October 09, 2015, 08:27:02 PM
I think this reboot issue might happen when Digital Audio is set to Dolby Digital. After setting it I got two reboots within a couple of minutes of each other. Each time I was changing channels from channel ONE (a HD channel) to an SD channel

After changing it back to PCM I haven't yet got a reboot.
#36
Hi Ian,

Yes this only seems to be a problem for recordings created after the firmware upgrade (for me anyway).  Any recordings prior to the upgrade still have the AutoSkip data in them (ie. they have the little IceTV logo in the MY REC page).
#37
SKIPPA / Re: Skippa User Experience so far
October 09, 2015, 10:09:44 AM
Is it possible to rollback to the previous firmware?
#39
I've noticed that anything the Skippa has recorded since upgrading to 1.1.10600 has not been processed for AutoSkip.  I've tried rebooting it several times but its still not working.

In the IceTV settings it says its processing a recording but it never finishes.  See attachment for an example.  Notice that its busy with a recording from 8-Oct 7:25pm but the current time is 9-Oct 6:16am.  It can't be taking nearly 11 hours to process a 1 hour recording.  It's the only recording on the HDD too.

I've now formatted the HDD and have scheduled a recording during the day.  I'll check it tonight when I get home.

I noticed jas55 mentioned he's having problems too in another thread (http://forum.icetv.com.au/general/44/skippa-user-experience-so-far/4578/msg23301#msg23301)

Anyone else having problems?
#40
SKIPPA / Re: Random Reboot while changing channels
October 08, 2015, 11:01:47 AM
I got an "Out of Memory" error when I tried updating the firmware the first time.  Tried it again and it worked but it wouldn't reboot.  I ended up pulling the power plug.
#41
SKIPPA / Random Reboot while changing channels
October 08, 2015, 08:45:30 AM
I'm not sure what value there is in posting this bug given that the company is in Voluntary Administration but here goes...

About 4 times now my Skippa has rebooted itself while I was changing channels.  The most recent one was last night several hours after installing the latest firmware (1.1.10600).  It's also happened once when turning on Closed Captions.

Anyone else getting this behavior?

BTW, I'm in Melbourne using the Mt Dandenong towers (in case its something do to with the signal).
#42
SKIPPA / Re: The purple / pink screen bug seen by some
October 06, 2015, 08:06:38 AM
Quote from: warkus on October 05, 2015, 04:57:33 PM
Mantorok I was just wondering if you noticed your timers all working fine after the DST change?

Did they fire correctly, or did you miss parts of shows?

Doctor Who recorded fine on Sunday night. I have watched it and no missing bits.  Also a few other shows last night (Monday) looks like they worked ok too but I haven't watched them yet.

I did however get another green screen which is a bit of a worry. If I get it again I'll take a photo and post it on the forum.
#43
SKIPPA / Channel Favourites
October 05, 2015, 12:58:56 PM
I'd like to see the Channel Favourites feature redesigned.  In its current form I find it's not very useful.

Usage:

Ideally a user should be able to define multiple Favourites, each with their own unique name that the user specifies. eg. You may want one for all channels, another for the channels you watch, maybe another for your spouse and perhaps another for the radio channels. So the names might be: All, Fred, Wilma & Radio

The FAV button will be used to select a particular Favourite.  Each press will cycle through the defined Favourites (ie. not the channels within a Favourite). eg. All -> Fred -> Wilma -> Radio -> All. The Channel Up/Down buttons will cycle through the channels defined for the currently active Favourite.  The currently active Favourite should be shown somewhere on the screen temporarily (perhaps the Info bar).

Setup:

The user will maintain the Favourites in Setup/Settings. Options to add, delete or modify a Favourite are available. When defining the channels within a Favourite perhaps show a list of available channels on the left and the ones selected on the right.  From here user can move channels from one side to the other.

When selecting channels to be added to a particular Favourite the user should be able to order the channels however they like.  ie. Not numerically by LCN.

Harmony Remote:

I noticed the FAV button is not defined in the Logitech Harmony database. Can someone at IceTV please add it.

#44
SKIPPA / Re: The purple / pink screen bug seen by some
October 05, 2015, 09:37:50 AM
I also get the purple screen when the Skippa is in standby.  In my case the Skippa is connected to an AV Receiver which is then connected to the TV.  It doesn't seem to cause any problems though.

Yesterday, after switching the Skippa on I got a GREEN screen.  Everything still worked but the TV picture was skewed heavily into the green spectrum.  Putting it back into standby and then back on again didn't fix it.  I had to do a manual restart via the menu.

This was the first time I switched it on after the automatic Daylight Savings Change...not sure if this had anything to do with it or not.

BTW, the automatic Daylight Savings Change is AWESOME.  Coming from a Beyonwiz S1 and prior to that a Toppy 5000 this is a feature I've wanted for so long.  Well done IceTV!!!  :)

#45
Quote from: warkus on October 05, 2015, 02:45:14 AM
Would anyone else like me to detail how this is achieved?

Yes please!  ;D