Main Menu
Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - nodyel

#31
Getting Help / Re: New IceBox - DOA?
December 11, 2023, 12:59:59 PM
Quote from: raymondjpg on December 11, 2023, 11:51:02 AMIs this IceBox connected to the internet?

Hi Raymond,

No, not on the internet yet - was planning on connecting it to wifi, but as I can't do any set up that hasn't been done.

Mike.
#32
Getting Help / Re: New IceBox - DOA?
December 10, 2023, 09:55:11 PM
Hi Daniel,

I couldn't be sure 100% now - I can't see any markings regarding being 4K compatible. Hmmm - I might duck out in the morning and grab one. I am pretty sure that I have purchased at least 1 4K rated one, but I am not sure if it is one of the one's I have now.

Will grab one and see what happens and report back.

Mike.

Quote from: Daniel Hall at IceTV on December 10, 2023, 09:20:37 PMHi Mike,

Are the HDMI cables rated for 4K content?

By default if a 4K TV is detected it will output 4K and I have seen this exact scenario happen with cables not rated for 4K with a no signal error after the boot screen logo.
#33
Getting Help / Re: New IceBox - DOA?
December 10, 2023, 08:46:18 PM
And lastly, I opened it up. Like you said, the connectors are fairly tight. Unplugged them and put them back (power off and unplugged of course). No difference.

Mike.
#34
Getting Help / Re: New IceBox - DOA?
December 10, 2023, 08:23:07 PM
Left the power off for a good 15 minutes and no difference. Tried giving the cables a bit of wriggle and no difference either.

Mike.
#35
Getting Help / Re: New IceBox - DOA?
December 10, 2023, 08:02:57 PM
Hmmm - just another thought - Is it worth opening it up and making sure the disk is properly seated? No sign of any impacts on the packaging or contents, but maybe vibration on its way from SYD to MEL?

Mike.
#36
Getting Help / Re: New IceBox - DOA?
December 10, 2023, 07:50:36 PM
Hi MD,

I'll give it another try and leave the power off for longer. May not have been a minute between each change, but I did power off each time.

Cheers,

Mike.
#37
Getting Help / Re: New IceBox - DOA?
December 10, 2023, 07:45:59 PM
Hi Ian,

Thanks for responding.

Yes, I tried various combinations of tuners in and out (and the remote dongle), swapping over the tuner cables. I have also tried each of the 3 HDMI cables on different HDMI ports on the IceBox. Can't think of any combination I may have missed.

Will see what IceTV say when I log it tomorrow. A USB update couldn't be much more difficult than building and administering a multi-tenant Azure environment :-)

Cheers,
Mike.
#38
Getting Help / New IceBox - DOA?
December 10, 2023, 06:48:40 PM
Hi,

I'll log a support ticket tomorrow, but I thought I would post here to see if someone may be watching and has a 'quick fix'.

I received my new IceBox a couple of days ago and it is only starting up part of the way.

I connected all the hardware items first as per instructions and then started it up.

Looking promising to start with in that it came up with the IceTV logo. But that is far as it gets.

After a few seconds, the screen goes blank (i.e. black). Then, after another few seconds, the TV displays a 'No Signal' message. I have left it setting there for 10 minutes or so, but nothing.

TV is a Samsung UA65MU6100.

Things I have tried:

1. 3 different HDMI cables.
2. Tried a different HDMI port (although the one I had it on worked fine with my BW U4).
3. Numerous power cycles on IceBox as I made the changes, as well as TV 'hold the power button' reboots.

Any suggestions as to what else I can try?

Looks to me like it is failing to boot fully, but I can't see anything else I can try....

Also, in the email I notification I received when it was dispatched it was mentioned "The IceBox has been shipped with our latest software."

Hopefully,
Mike.
#39
Beyonwiz / Re: U4 EPG
February 05, 2018, 05:44:43 PM
And for anyone else regarding that may be interested, the missing channels issue was resolved by re-running the IceTV setup wizard - that forced it to do a complete update and pick up my changes in the enabled/disabled LCNs.

Thanks to Colin :)
#40
Beyonwiz / Re: U4 EPG
February 05, 2018, 05:41:05 PM
Yep, thanks Peter - I meant standby.

I've found the logs and found it had been doing the update every 15 mins. All good  :)

Mike,
#41
Beyonwiz / U4 EPG
February 02, 2018, 02:23:48 PM
Hi,

Have just set up my new U4 and still exploring all the options.

A couple of questions with using it with IceTV...

1. In the EPG, some channels are not showing any programs:
    ABC News
    SBS ONE HD    (SBS ONE itself shows content)
    SBS Viceland HD
    SBS Viceland
    Food Network
    NITV
    C31
    7flix Melbourne

In my account, I have made sure that 'All' LCNs are selected (I had a chunk de-selected for my old Toppy to avoid the reboots). Do I have something wrong? Or is the problem elsewhere?

2. With my old toppy, I set up a timer to wake it up a couple of times a day to download any updated recording times that I set up or changed remotely. Does the U4 still need this, or does it keep it up to date whilst powered off (well, sleep mode)?

Cheers,

Mike.
#42
General Discussions / Re: Trying to subscribe...
November 10, 2015, 03:08:04 PM
Didn't notice that, lol. Works fine now with that change and all subscribed again  :)

Thanks Dave.
#43
General Discussions / Trying to subscribe...
November 10, 2015, 01:01:20 PM
I tried to subscribe last night a couple of times, and a couple of goes today, but each time I click 'Proceed to payment' (or whatever it says) I get the following:

Internal Server Error
The server encountered an internal error or misconfiguration and was unable to complete your request.
Please contact the server administrator, info@icetv.com.au and inform them of the time the error occurred, and anything you might have done that may have caused the error.
More information about this error may be available in the server error log.
Apache/2.2.15 (CentOS) Server at www.icetv.com.au Port 443


Tried IE & Chrome, both came up with the same. Problems with the subscription processor? Have also sent details to the 'info' address suggested.

Regards,

Mike Leydon.