Main Menu
Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - brianh

#31
IceTV EPG Content / Re: Missing info
September 11, 2006, 01:10:39 PM
Now to really stretch the theory - this would depend on how other STB's store & display their data, but here goes - given that messages relating to a channel can be shown in that channel's info, can that concept be extended to provide a way of flagging important notiices/announcements to end users right where they're watching?  What if it were possible to assign a dummy "channel" which could be used to send & display announcements?    It would be easy enough to transmit, it's just a question of how it could be viewed by the user...

I am guessing that for the Topfield, it might not be workable with the standard EPG unless it could be built into the IceLoader or EPG_Uploader TAPS -  but with something like JustEPG, it could be set up to view the dummy "channel" on page 2...

Just a wild, random and probably impractical thought....

Cheers,
Brian H
#32
Hi Stuart,

Might be worth posting in the Topfield Forums (if you haven't already, that is) - I know this has been done, (haven't gne there myself yet!) - requires a webserver mounted on the Icebox (or attached PC?) - a search of the Toppy forums should yield something.

Cheers,
Brian H
#33
IceTV EPG Content / Re: Missing info
September 11, 2006, 10:29:10 AM
...just a thought...  is it possible - and/or acceptable to other users - to put the comment in place of  the missing data??  That way, no-one needs to log onto the forum, the information is right there where we woud be looking for it anyway...

I would be happy with that, but what do others think?

Cheers,
Brian H
#34
Topfield / Re: Firmware for ASUS router (wifi bridge)?
September 07, 2006, 10:57:50 PM
As indicated by Peter Vogel in another thread somewhere, there is a heck of a lot going on behind the scenes currently to prepare for their upcoming legal "appointment".  I can understand this has an impact on support, given that this type of preparation is entirely necessary & extremely time consuming, and this is one of the effects Nein no doubt intended it to have.

For my part, I am happy to rely mainly on phone support and allow the Forums/emails to lag a bit, given the alternative if they didn't prepare their case.

Cheers,
Brian H
#35
General Discussions / Re: Icebox2 Setup Problems
September 07, 2006, 10:45:53 PM
Hi,

In the absence of any gurus, I will do my best... :-\   

I don't understand your IP setup; you mention one lot on 10.0.1.n and the modem & icebox on 192.168.1.1 -  Definitely, you will have problems with two IP's the same.. but as far as I can tell, you also have a problem with your network?

Whatever you decide to use, I would keep your whole network on the same range... then if you can connect your Icebox to a laptop/standalone MAC via cable first & set the IP address to somthing unique in that range. You may need to set a static IP on the standalone to get it to talk, then change it back once you have reset the Icebox with the new IP.   Don't worry about security until you have that working.

We really need to know more details of your setup in order to help further, but hope this can get you somewhere.

Cheers,
Brian H
#36
Quote from: Daniel Hall on September 05, 2006, 09:26:02 AM
The Asus firmware was a bug fix release.


Geez, there you go... - and I always thought that was just an 'enhancement' :D

Cheers,
Brian H
#37
I upgraded via wireless - all went fine, no smoke or flames.... I know the manual (for the non-ICE ASUS) reccomends using a cable connection though, just to be on the safe side..

Cheers,
Brian H
#38
Hi,

I was hoping someone at ICETv could enlighten me about the new firmware which showed up as available on my IceBox2... Just bugfixes, or are there some noticeable changes?

Cheers,
Brian H
#39
After further investigation, it appears the problem is with the rate at which data is being transferred from the toppy to the IceBox2... (I guess that means it's the USB causing the limitation?); it is only registering "frame rates" of between 9 - 20 fps (as measured on the xbox) when a file's info puts it @ 25 fps...  (the same file on the PC HDD streams wirelessly with no problems...)

Edit: Toppy transfer rates appear to be around 256 Kbps(?) - the rate for files played from the PC is around 480 Kbps...

does anyone have any clues as to how I can improve this?

Cheers,
Brian H
#40
OK all you network gurus, it's time for you to to utterly bamboozle me with your expertise... my setup is as follows

I have an Icebox2 connected to my toppy; I have managed to set up an Xbox connected to the Icebox directly with cat5 cable (from another room by ~ 10m of cable), and access to the toppy's data files. The relevant cache settings on the Xbox have been set to the max.

When playing files from the toppy, the stream starts OK, but soon starts halting and stuttering; I found that pressing one of the gamepad buttons displays data rates - the buffer starts out OK but gradually (over ~20 secs) decreases to 0%, when the stuttering starts. Data rate appears to be "256000" for one file. (no units shown?)

What is the rate that Icebox can "supply the data off the toppy" - is it fast enough, and how would I test that?

Is there any way to optimise or adjust it?

Any info welcome,

Cheers,
Brian H
#41
I would guess it's the ASUS/IceBox with the problem... I think you will definitely need to refer to their service department for further assistance.

Cheers,
Brian H
#42
Are you able to to use another PC (preferrably a laptop) to connect to the toppy? - I would think that if you can get reliable connections with altair through direct USB with the toppy that it might help determine whether the toppy is the source of the problem...

Cheers,
Brian H
#43
Topfield / Re: Disabling the ice_epg_loader tap
July 31, 2006, 09:30:33 AM
Well, after thinking I was immune - no such luck...  what I have noticed is that even with all days to upload de-selected, the re-loading of the TAP happened at the "Next Fetch Due" date indicated by the IceBox2. 

I have no idea where the Next Fetch Due date is derived from; the only uploaded TAP previously on my box was 2/07 (one I had moved out of Auto Start) but it's possible  that it has been uploading & overwriting the copy in the Auto Start folder.  I will keep an eye on it & see if I can track the activity.

hope that helps,

Cheers,
Brian H
#44
Topfield / Re: Disabling the ice_epg_loader tap
July 27, 2006, 12:05:24 PM
Just in case it helps - I use the IceBox2, TEDS-ICE with EPG_Uploader v10 to get the Ice info - following the TEDS install, all I did was use the toppy's file menu to move the Ice uploader tap out of the AutoStart folder (I think I just moved it into the main Program files folder) & I haven't had a problem yet... that was at least a month ago now.

Cheers,
Brian H
#45
General Discussions / Re: Icebox2 Setup Problems
July 27, 2006, 11:54:08 AM
Quote from: peteru on July 26, 2006, 09:33:26 PM
If your router has an address of 192.168.2.1, then your default gateway and your DNS server are almost certainly 192.168.2.1 as well.



Peter,

would the default gateway possibly be the IP address of the Antenna/modem in the roof??  From memory, I tried to set the "default gateway" to my wireless access point & the DNS server to my modem & this wouldn't work - it wasn't until I entered my modem's IP for both settings (following a support call  to Ice) that it worked.... (with my modem being the DHCP device)  I know you are much more knowledgeable about networks than I am ever likely to be, just seeking clarification.. ???

mudjeep,

have you set your Belkin up as your DHCP device? (just so I understand your setup correctly)

Cheers,
Brian H