Main Menu
Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - tonymy01

#241
Yes, as I said in my post, the only way to get these is with a keyword, and notice the show title, it has the date in the title!!
#242
LOL... I just edited my post the same time you were posting!
#243
Oh man, silly titles and series recordings.
ICE, I setup series recording for Blackadder.   The moral dilemma, do you ignore this and not record the "Blackadder II" series due to the title change?   I expected these to be recorded being part of Blackadder, and due to having a different title they of course didn't.   But here is the thing, it *is* a new series (well, compared to last week's Blackadder), but I shouldn't have to keep reviewing my series just because a show title changes (should I?)... argh, this is a curly one (like the Sports:Year ones in other threads I guess).
Turns out (if the eps are played in order) I missed the 1st four eps of season 6... argh.   And I also in researching the 4 seasons of Blackadder last night, found each season has a unique name.   This looks like one area where season recording with ICE falls apart.   So, I suppose I could do it as a keyword recording, as I am sure the name is unique enough not to show up in anything else ;-).

What the heck ICE?: 
"Blackadder the Third (1987)"  (This Friday).   I don't think anyone could come up with a season recording to guess you were going to call it that!
#244
It is a pull client, not a push from ICE (push wouldn't work through firewalls/NAT unless you setup router rules in your NAT router).  So once the PC wakes up, the ICE client will try to pull down the info at regular steps and can be rejected by ICE if too often, the ICE protocol for the Beyonwiz will tell the client how long to hold back for until next poll to reduce the load on the ICE servers (you can see the time to wait in the status windows in the Wiz) so I would presume it is the same for the PC client.
#245
Strange forum to post in, this is the ICE forum related to ICE on a Toppy, not a general Topfield support forum.   http://www.itopfield.com.au has working forums again finally.   Having said that, this issue plagued 4400 owners, and it is a firmware bug that causes the HDD filesystem to get corrupted.   You may be able to rescue it with a PC application called TopfHD/RW, but I have my doubts if you have let it go on too long like this.   You will need to pull the HDD out (or at least pull the lid off and run a long IDE cable & power to a USB HDD case) and put it into your PC to run this.
The firmware bug was an issue for September 2006 firmwares for the normal 5Ks, but happened very infrequently, if at all.   It plagued 4400 owners with whatever version they ended up with, and an upgrade sorted that out.    The Feb06 firmware is very reliable, as is the 2009 firmware, forget the 2007 & 2008 firmwares (dual recording bugs etc).

Oh... Black Panther.... good luck finding firmware for that model.

The cause is basically the filesystem knows something is there, but can't decipher the header of the REC file properly due to the file access tables of the filesystem being corrupted (theory).   Without a proper REC header, it can't determine quite a number of the parameters of the file.

You can simulate this issue by pulling the power plug while recording, and find the header doesn't get written properly (it only properly gets updated once the file has finished recording)  and it can only show the original time it expected it was recording for, and the filename.

There is a plethora of firmware hacks to get around this corrupted REC header on power fail "bug", but for a corrupted filesystem where every file is wrong, you need to take further action.   Perhaps as a last resort before ripping it out to use TopfHD/RW on it, you could try pulling the plug while it is powered on, and the next time you power it up, it does a HDD check, and may recover the corrupted filesystem tables, but I doubt it.

Regards
#246
Wow, that topic doesn't cover half of it.
Lets try to itemise the issues with broadcaster EIT:
1.  The stations are often worse with updating it than ICE is (incorrect shows listed when changes are made to the schedule, some of those changes being made/announced many days in advance).
2.  The stations like to SHOUT AT YOU WITH UPPERCASE TITLES (yes Nein, that is you)
3.  The stations like to give generic names, like FRIDAY NIGHT MOVIE, WIDE WORLD OF SPORTS (yes Nein, you again).
4.  The stations don't take advantage of extended EIT (which can support text descriptions of up to about 3000chars.   Short Event Descriptors can only support 250ish chars *shared* between show title name and show description).... some are using extended these days... I think Ten uses it just to stick a silly copyright string in.   This often leads to quite truncated descriptions (mind you, I notice descriptions truncated on my W7 media centre when ICE likes to provide a few pages of description for some things  :D, but nothing like "This is a story of a dog and his partn" )
5.  The stations tend to not use EIT to flag repeats, parental ratings and other details that ICE definitely tries to data fill (ok, some of this info is in some of the EIT these days, and ICE plonks some of the info in as part of the extended program description rather than as actual flags.. well, I think).
6.  The stations often don't get anywhere near 7 days worth of data sent
7.  The stations only broadcast their own EIT, so you need to channel surf all broadcasters to get the EPG datafilled (and the EIT standards typically have a 10second repetition rate for Now&Next, blowing out to 30 or so seconds for current day and up to 7 days, so you can't just channel surf quickly to data fill, typically you need to be on each broadcaster for at least 30 or 40seconds).

Getting the picture?   And who knows what Freeview Phase 2 will be about, where they introduce a homogeneous EPG for all compliant boxes... will this mean they ditch the "7 day" (I say that loosely) EIT and go back to just Now&Next?
#247
I presume you chose the "TV-PC" in the device list (in the main interactive application tab) and chose "reload"?
#248
For me, I just did an update from 3.0.0.7.   My 3.0.0.7 pre-padding was not working, 3.0.0.8 went in with nearly no hitches (just had to reselect the device and reload).
#249
Mine appears to be working fine.
#250
It is a sucky option, that is for sure.   I was wondering why this week the 2nd Californication ep of the pair, not a repeat, was not scheduled to record on my Wiz, and sure enough, my series recording is "record one per day".   I *hate* that as a default option.   Now I will have to check my 50 or so series to see if I have this set on all of them.
#251
Until you find the pre-padding settings don't work any more (well, the last thing my media centre recorded seemed OK, maybe ICE fixed it server side, or the show started quite late).
#252
Beyonwiz / Re: Guide in IceTV and Beyonwiz
January 12, 2010, 08:12:32 PM
setup (and ensure you select it) a faves group on the wiz.
#253
????   The Beyonwiz is completely independent to your PC.   The Beyonwiz speaks to ICE via the Wiz LAN, not to your PC.   The Windows7 instructions are for Windows media centre (i.e. Windows running a TV tuner or 2 or 10;-) and tuning TV and recording etc on the Windows PC... i.e. nothing to do with your standalone PVRs)
#254
Topfield / Re: Uploading to PVR with windows 7
January 09, 2010, 11:27:47 PM
Did you install the Vista compat Topfield USB drivers?   Go to Topfield Korea to get them.   It is tfbulk.sys/etc.
#255
Windows Media Center / Re: Padding not working
January 09, 2010, 11:26:11 PM
My WMC7 seems to do something at 1am every night, I believe this is the reindexing you configure in the WMC config?