Main Menu
Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - simoncasey

#211
Beyonwiz / Re: Blank title in timer
December 14, 2015, 07:40:23 AM
Quote from: tonymy01 on December 14, 2015, 07:22:52 AM
Quote from: csutak40 on December 14, 2015, 12:29:49 AM
Quote from: simoncasey on December 13, 2015, 12:55:49 AM
Menu>Power>restart gui will do a restart. It's possible that the tidy up of the timer is done when the t3 shuts down rather than during the start up.
OK did that.  Made no difference.  Didn't think it would, as I have switched it off at the back a little while back and that didn't help either.  After doing that, just for the fun of it, I also disabled the IceTV plug-in, then re-enabled it and forced a new fetch.  Still the same blank timers (and they are still not blank in thee EPG
Switching it off at the back isn't a shut-down, it is an abrubt stop!  But perhaps Simon's suggestion of it tidying up on shut-down isn't the right answer anyway given your (well, our) experience is to the contrary.

Prl posted that the gui restart is the step that fixes up blank timers from the epg so doing it twice should fix it.

This means there seems to be another issue:
Is the title blank on the icetv server and therefore after the BW fills in the title, the icetv server blanks it again
Is the title not actually blank but has some invisible characters in it (maybe a space)
Is there some other error with the timer that prevents a gui restart from fixing it
Is there a problem with the epg that prevents the GUI restart from fixing it

Whatever the cause, it is hard to reproduce at will.

I will try setting up the same timers as Judy as I'm also in Melbourne and see if there is anything odd about them.

Judy, the blanks you have on 10 today. Did you set them up as series recordings, individual recordings from icetv, individual recordings from the epg or using keyword recordings?
#212
Beyonwiz / Re: Blank title in timer
December 13, 2015, 07:17:41 PM
Do you have any other current timers with blank titles?
#213
IceTV EPG Content / Re: Coming Soon Useless
December 13, 2015, 07:16:00 PM
I'm so desperate to see if Agent Carter is any good advice had a series recording for it for 6 months.
#214
Beyonwiz / Re: Blank title in timer
December 13, 2015, 04:35:53 PM
Quote from: xanthi on December 13, 2015, 04:14:32 PM
From BLANK times to THIS ... Four waiting times and instead of getting the program name I get the date ... Fantastic! Not

By waiting timers, I assume you mean that the timers had blank titles.

A few questions:
Do you know if the epg had data when those timers had blank titles
Are they for shows that you regularly record or are they shows that you only recently added a series recording for.
#215
Beyonwiz / Re: Blank title in timer
December 13, 2015, 03:52:08 PM
The blank epg data looks like it is from icetv. In most cases I have seen the same gap in the website/app, and it is often only in a specific region. It's not easy to spot unless you are looking for it.

Generally icetv are pretty quick at fixing but the issue seems to be that once there is a gap, the updated data doesn't appear on the T3 automatically, but does if you clear the epg by doing a disable of the plugin. 

You might notice it on now and next data (depending if you also have eit set for now and next) when you change channels and the now/next changers after a second or show the same show or is blank.
#216
IceTV EPG Content / Re: Coming Soon Useless
December 13, 2015, 03:46:37 PM
Quote from: prl on December 13, 2015, 03:24:36 PM
I know that all the IceFolk have a big task still to just keep the basics running, but I'd also like to put in a word for having "Recommendations" working again in the app. My memory of it when it was working was that it had overlapping, but different, content from the "What's on" emails.

I think it was updated 3 weeks ago after some prompting. I find the email more useful but have found it has some odd stuff on it at the moment.
#217
Beyonwiz / Re: Blank title in timer
December 13, 2015, 03:35:07 PM
Thanks prl. That certainly covers the experience I have seen but I think there is a further complication.

I some cases there are blanks in the epg and that can contribute to the blank titles, particularly on non abc/sbs channels.

I've also noticed that the blank Epg won't get updated automatically from a reboot or a icetv fetch. The only way I have found to update the blanks in the epg is to disable icetv and reenable it, which basically clears the epg and fetches the whole thing again. This is why I suggest doing this step as the gui restart won't fix the blank titles if the epg is blank. I think this blank epg is also why people get blank titles on other channels and also why the blank timer ends up as a blank recording as doing a restart won't fix it. 

Also, in terms of timers greater than 7 days that is sbs and abc. I currently have 5 abc timers with blank titles for next Sunday.
#218
IceTV EPG Content / Re: Coming Soon Useless
December 13, 2015, 03:01:42 PM
I think all of the new lifestyle shows should be there but I assume it will calm down shortly. The main issue is missing new seasons of new or returning shows on the main channels during prime time.

Also as prl points out. Funny as made it to this weekends recommendations but surely that would prompt it to appear in coming soon.

I also don't think repeats of old movies really warrant a coming soon. In fact, I can't see why any show that is a repeat should appear in coming soon.

But whatever you are doing differently now isn't working. Coming soon was the first place I always opened when planning a week's TV. Currently it's not really reliable enough to use as the primary source.
#219
Beyonwiz / Re: Blank title in timer
December 13, 2015, 12:55:49 AM
Menu>Power>restart gui will do a restart. It's possible that the tidy up of the timer is done when the t3 shuts down rather than during the start up.
#220
Beyonwiz / Re: Blank title in timer
December 12, 2015, 11:14:05 PM
Quote from: csutak40 on December 12, 2015, 10:22:15 PM
I just checked the EPG for the times when I have missing titles in the Timers list.  They are all populated, so this makes no sense to me.  I took screen shots of all the ones to do with the screen shot I posted in my previous post

Can you try doing a GUI restart of your t4 from the power menu and see if the timer titles get populated.
#221
Beyonwiz / Re: Blank title in timer
December 12, 2015, 10:07:05 PM
My experience is that refreshing the gaps in the epg requires the plugin to be disabled and reenabled and that giving updating a blank title with the epg just requires a Gui restart. I have also checked that doing a Gui restart with a blank title seems to fix up the blank titles irrespective of whether it is an icetv timer or not.
In most cases people haven't had a problem with blank titles recording, they just get a recording with only the date and time as the file name.

I agree that the cause seems to originate from blank data coming from icetv that doesn't seem to get updated. There doesn't seem to have been any response from icetv as to whether they believe the problem is at their end or not.

I currently have 6 timers with blank titles but they are all for >7 days in the future so no epg data as yet. As soon as I get epg data for those days I'll do a Gui restart and check that fixes my blank timers.
#222
IceTV EPG Content / Re: Silent Witness Melbourne
December 11, 2015, 05:07:51 PM
Quote from: IanL-S on December 11, 2015, 04:10:13 PM
To add to the confusion, I just noticed that 9Gem were adverting the episodes shown this week as being "new".

Ian

They could argue that everything on 9Gem must be new.  The previous shows were shown on GEM. :)
#223
IceTV EPG Content / Funny as
December 11, 2015, 07:47:40 AM
The icetv what's on email has Funny As: Tom Gleason on this weekend. Is this part of a new series of funny as in abc. YourTV.com.au just lists it as Funny As with "Tom Gleason" as the episode title.  If so, I thought this had previously been set up as a series on icetv rather than individual shows which I think would be more useful.
#224
Quote from: michaelwho on December 10, 2015, 06:45:13 PM
Dave in the first post I just mentioned as an aside that I could not delete the timer.
I think that is what was causing confusion, the timer shows with the grey circles so there is no timer. As such, the fact that you cant delete a non existing timer is correct.

However, looking at your problem, I note that the show has also been identified with a keyword search. I wonder if you have the keyword search also set to no repeats and the two are conflicting with each other ie a series recording that says to include repeats and a favourite that is set to ignore repeats.
#225
Humax / Re: 9HD problems on 7500t
December 10, 2015, 03:14:26 PM
Humax posted this on their Facebook page on 30 Nov

For HDR-7500T & HDR-7510T, everything will be working seamlessly.
For HDR-3000T & HMS-1000T, IP EPG information for channel 9 is currently being reviewed and will be made available to customers very shortly!
For HMS-1000T, recording is not currently available on Channel 9 HD. However, it is currently being reviewed and solution will be provided to customers in a very short time.
If you have any further queries, please email us at hauservice@humaxdigital.com
Thank you