Main Menu
Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - tonymy01

#211
IceTV EPG Content / Re: "V" reruns
March 10, 2010, 09:49:48 PM
Argh, I have done it again.  That search in ICE guide is *useless*  in the "my upcoming shows" section.   Natural instinct is to type the show name in there, and of course it just searches your upcoming shows, not the full guide.... I wonder if the re-runs were there all along and that is what I did the other day also??

I don't quite know why the search option is even in the upcoming shows section, when it only searches your upcoming shows.   All of your upcoming shows are on the one page, so it makes no sense to have a funky search engine when you can literally search for text on that page with the web browser.   It gets me time and time again when I go to search for new shows, as of course 99% of the time I have my browser sitting at the "My Upcoming Shows" page as I am always on the lookout for clashing shows that haven't transferred and the like.

That is it, there is only one option here, and that is to ensure I have faves set for every show I want to record.  Then I can see if it is on the my upcoming shows page and see re-runs of it on that same page if I need to select a rerun to record to resolve a clash.   I think it is the quickest and easiest way.   But the search option there still gets me every single time ;-).

Of course if the Widget wasn't so useless compared to the web page, I would use that a lot more, but all I really do is use the Widget to see the "Today Now" timeslots cruising on thru and non-donuts (shame it isn't up to par of the Web interface).
#212
Yep, once or twice I have seen donuts for timers that have definitely been sent.   I don't know if there is any rhyme or reason for it, despite showing as queued, they upload fine, and the ICE queue system just seems to miss some of these for some reason (thankfully it doesn't miss sending them!)

And I have found even when I don't make any timer changes for a week (therefore no last minute new ones added) sometimes one or two in the next day or so are queued still, but further out they are properly loaded and indicated as such.   So it isn't due to timers being added last minute or anything, it is just somehow ICE is not seeing the link between the current timers in the Wiz and ICE's queue.

Definitely ensure you purge all duplicate broadcasters, it could be something silly like ICE isn't linking the two together because they are being setup for different channels than what ICE is expecting, due to the Wiz having duplicate LCNs (but surely if ICE simply uses LCNs, then it wouldn't care if you had a timer setup for ABC on one broadcaster on LCN2 or another received version also on LCN2... the mind boggles).

Log a case with ICETV if you are seeing this on ALL your timers (as you have claimed in your post as far as I can read/interpret the posts).

Regards
#213
Yeah, there has been quite a bit of discussion about how they cut the smithereens out of the new season 1st ep a few weeks ago to squeeze 2 eps into 2hours (but had over 20mins per hour of adverts) and everyone knew they would have to cut for a 1hour commercial timeslot.   I am guessing they have listened to the complaints and how have it in a 70min slot which, minus adverts on both networks, ends up with the same length show that SBS used to show.
#214
IceTV EPG Content / "V" reruns
March 09, 2010, 07:49:31 PM
According to TV Tonight, V is going to have a few encore/re-runs this week, but I can't find them in the guide.   Hope Nein advertises this fact soon!  I missed the last 10mins or so, wouldn't mind recording one of these re-runs to catch up in a less clashy timeslot now.
#215
Does your Wiz see the network properly?  (Does WizFX work firstly, then does WizTV work?)  If so, then it is something else.
#216
you are getting duplicate 7 broadcasters received, and need to get rid of all of them, please see the beyonwiz forums for how.
#217
Wow, that was a quick response and resolution to a problem that has been bugging me for a while! Thanks ICE/Russell.
#218
Ok, a simple task, find the new show "V".   I gave it a shot a day or two ago, couldn't find it, expected it probably hasn't started yet.   Then see it is definitely starting Sunday according to "tvtonight" so must be in the ICE schedule.   Go to the guide, go to search, type "V" and of course 'Whoa! You searched for something that had a lot of matches, so we've only shown the first 200 results below. ' is the result.  Go to Windows Media Centre, go to guide, go to search, type V, and bingo, perfect match, see the show is on 9 and 90 next Sunday.
ICE, please make your searching for shows a bit simpler/smarter than what it is.    This isn't the first time I have tried to find a show and give up looking either.     Another "got-ya" from the search is when you are in "My Upcoming Shows" and do the search, it doesn't search the guide, it actually searches your upcoming shows (which is not really any point given they are all listed in front of you and you can do a browser page search for the text instead).

Ok, lets go to advanced search.   Ok, choose title, and look, it has exact phrase, perfect.   Type V, and hit search, and what do you know, 200 shows with the letter "v" in their titled, this doesn't appear to be exact phrase matching to me?  Ok, I guess my "v" is exactly matched in lots of show titles, and maybe I might want to search for shows like this in most other cases, but it should not be this hard to find a show that I know exists in your guide (don't suggest to surf your guide looking for it either, the guide layout is terrible for finding anything).

Regards
#219
XMLTV (General) / Re: XMLTV importer problems
February 19, 2010, 01:04:23 AM
Is it this issue:  http://www.icetv.com.au/index.php?topic=2387.0 ?
(Test you can get to the XML download page and download XML via the browser and view it in notepad/wordpad and see if it is complete).
#220
Wow??  So it actively deleted the timers, or simply stopped getting them to the PVR and so the week's (well, 5 days) worth ran out?
#221
It does when ICE marks the second ep as a repeat.    Unfortunately, this is a bit of hit and miss currently due to the juggling about of some of the shows.   Just be thankful that they didn't accidentally mark a 1st run as a repeat, I think your missus would be much more upset if a recording was completely missing when you have the "1st runs only" option set...
#222
Specify "first runs" and not "First runs and repeats" will solve this issue.   7/7TWO??? Biggest Loser is on Ten only here (Sydney).   It had encore plays on the same channel during the day, not the second channel (which doesn't exist for Ten).

Now "Lost" on the other hand... that is scattered all over the shop on 7/7HD and 7TWO, premiering actually on the Youtube quality 7TWO (dual eps for the premier) and showing a single ep later on 7/7HD (unfortunately not in HD though... grr, so not even worth waiting for).
Regards
#223
Quote from: grahford on February 16, 2010, 01:38:27 PM
Plus given I've always got a backlog of taped shows I rarely watch live TV.  So I'm starting to lose track of what shows are on what nights without looking it up.  So I no longer have a feel for where clashes might occur.
Yep, same here.  I have a pretty serious backlog at the moment, 620G arghhhh (420G Wiz, 200G 5K, mind you, some of this is movies I might watch one day).
#224
I am positive about that.   I notice that if the timers come before the EPG (which does happen, say, when the LAN is down for a few days... happened to me, actually the DNS, never noticed it until the EPG had run out, which meant timers also hadn't got set, fixed the DNS and bingo, timers thru first, followed by EPG), the timers won't get named, this is the only side effect.   They are named the channel name only with * in front of it.
Duplicate LCNs *do* stuff things up, but this is only due to not managing to set timers for a channel that has good reception, as the Wiz maps based on scanning (so first in the list probably gets the EPG and timer, and this may not necessarily be the one that has good reception).
#225
PerlTGD, the open source alternative for the Topfield 5K that I run on my little SLUG hooked up to the 5K, does just about everything MTB is asking for, in about 2000 lines of perl code.   And it supports combining shows (and giving them a combo name) and then uncombining and deleting one if you change the priorities if another clashing show gets in the way (there is a priority scheme from 1 to 10 to support "any show with higher priority will bump any show with lower priority if there is a tuner clash").   It properly supports deleting and adding timers on the PVR to achieve this also, something I am not sure Interactive does properly (quite often a show will move timeslots, and ICE doesn't seem to delete any timers it setup for you for the old timeslot.   It does delete at times, so I know the delete will work when sent).

I ported it to the Wiz (using Eric Fry's timer setting engine, wizremote), but given I use ICE and am too lazy to release it formally :), it got about 1 person interested on the Wiz forums.   But I always have these hopes that ICE interactive will become a bit more useful over time, and support a few more features like PerlTGD and TED/S has.  It did get a pretty decent revamp a while ago with the better keyword options, and the better series options, but it still doesn't go far enough for me to 100% trust I will have the shows I definitely want on my Wiz HDD at the end of a busy week.

These last 2 weeks have been hell (beginning of ratings period I mean), I have spent a lot of time juggling keywords on the 5K and juggling interactive shows on the Wiz to try to make sure the 2 PVRs get everything I want.   Now most of the best shows are on SD, I can be happy that falling back to the 5K is not such a bad thing (and my Yamaha amp does a much better job of upscaling the 5K to 1920x1080i than the Wiz does in upscaling SD material), but now I have to work with 2 devices to try to make sure I get everything (and once or twice I work with another, my mega-unreliable Windows7 media centre, which needs the USB tuner to be reconnected after a reboot from time to time, and the internal antenna that is hanging off doesn't always pull in a signal on every channel).

And I know that if I get another interactive capable device, I will still have the issues of juggling independent machines, even on the one Interactive interface!   It would be good to be able to set some preliminary preferences like "I have 2 devices, 2 tuners each, allow clash overflow of device 1 to get recorded on device2, allow clash overflow on device 2 to get recorded on device 1"... and then also allow manual settings like now so you can distribute as you see fit amongst the two PVRs (but use colours to distinguish the multiple devices ICE!! Not silly pulldown menus, how can I tell a show is clashing or not at first glance if I only get to see half the picture at any one time!).

My ranting over ;-)