Main Menu
Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - nodyel

#16
General / Re: EPG duplication error...
January 04, 2024, 05:56:39 PM
Had a look in the EDIT options and found I could delete the invalid entry:

Channels2.jpg

Looks better.

When I was assigning picons to the channels, I must have accidentally hit that entry.

Sigh...

Mike.
#17
General / Re: EPG duplication error...
January 04, 2024, 05:38:45 PM
Hi Daniel,

The entry for 10 looks weird???? :

Channels.jpg


Mike.
#18
General / EPG duplication error...
January 04, 2024, 04:47:02 PM
Gradually getting used to my IceBox, but I found a weird error yesterday, that is still there today.

For channel 10SD, the EPG shows the programs of SBS (HD or SD):

EPG Error.jpg

When swapping between the two channels, they both show the actual programs they should, it is just the EPG that shows the incorrect information. Channel 10HD shows the correct EPG info.

Any suggestions? I am in Melbourne, if that makes any difference.

Mike.

 
#19
Thanks Daniel.

I gave it a try with the repeat flag on as I had it, but it didn't seem to make any difference. The IceTV web site still showed the same error after the reboot and giving it few more minutes or so.

Got me thinking though that all the other items I have set to record were new shows, and they were fine. It was just this one that was a repeat. So, i just turned off the repeat flag and redid the re-get and re-boot process and all seems to be perfect this time and the timer is now there.

I can live without it anyway as it shows the repeat info below the guide anyway. Plus it clears up the main grid a bit- just about everything is a repaet anyway now ratings have finished!

Thanks again,

Mike.
#20
Hi,

Getting used to my new IceBox (which replaced my dying U4).

I am having issues with Timers not being set for some series recordings (don't know if it happens with one-off recordings).

A sample image is attached.

Not sure if it is a IceBox or IceTV guide problem. I did transfer all the recording timers from my U4 when setting up IceBox, so for this error I tried deleting the series recording and then putting it back. Waited for the IceBox to update, but still the same issue.

I have seen an occaision where the error came up (for National Nine News), but it seemed to clear itself in time for the recordings to occur. I don't think i ever saw this on the U4 (just timer errors when recording too much at the same time due to padding).

Mike.
#21
Getting Help / Re: New IceBox - DOA?
December 12, 2023, 03:14:33 PM
Quote from: Daniel Hall at IceTV on December 12, 2023, 01:28:20 PMHi Mike,

Awesome news.

I think the problem is something between a changing of resolution to an unsupported resolution/refresh rate of the TV that was attempted each time.

Quite possibly. I will be using the box pretty well only for broadcast stuff (although I may use it for other things down the line) so just glad it is operational now :-)

Mike.
#22
Getting Help / Re: New IceBox - DOA?
December 12, 2023, 01:00:43 PM
Hi All,

Thanks for the various responses!

All fixed now! Had Daniel call me this morning, after I purchased a keyboard.

First we hooked up the keyboard and managed to get into the bios. Whatever we tried resulted in no difference to the behavior - with either a normal boot or trying to do a re-install from usb. The bios entries all looked correct, with the correct devices showing.

We also tried a few setting on the TV to no avail.

Just about to give up when Daniel asked if I had a PC monitor with a HDMI input. Luckily I did, a 4K one I purchased last year.

So, i hooked that up and lo-and-behold worked like a charm!

Daniel then left me to continue with the set of the software and had no problems with that. Once that was done, Daniel also suggested that I set the resolution of the IceBox to 1080p. Did that and powered the box down. Reconnected everything back to the TV and works like a charm! :-)

The only slight problem I had was with IceTV. The documentation mentioned that it uses IceBox for the device name. So, I had in preparation for this, already renamed my device to IceBox as thinking it would pick that up and get my recording schedule. No, of course it created another IceBox entry. Wasn't to hard to work out which was which, so I just tranferred the recording schedule from one to the other, and deleted the now empty one, and all was well again.

I guess it it not a cable issue as I used the same cable to plug into the monitor. Only conclusion we came up with is that there is something 'funky'with the TV. I have watched plenety of stuff at 4K, so I don't that is the problem as such. Maybe it is an issue with the HDMI implementation. Dunno. Just happy it is working!
Thank you and especially Daniel for his time today.

Cheers,

Mike.
#23
Getting Help / Re: New IceBox - DOA?
December 12, 2023, 08:25:23 AM
Quote from: IanL-S on December 12, 2023, 07:29:19 AMNot sure if it is relevant, but the way you are creating the installation USB stick may be playing a part. LibreELEC have a windows utility for doing this - see https://wiki.libreelec.tv/installation/create-media

Ian

I might give that a try when i get a chance.

Mike.
#24
Getting Help / Re: New IceBox - DOA?
December 12, 2023, 08:23:38 AM
Quote from: kazz on December 12, 2023, 06:13:53 AM
Quote from: nodyel on December 10, 2023, 06:48:40 PMTV is a Samsung UA65MU6100.


One more thing you could try, if your TV has an 8K HDMI input try that one.
I have a Samsung TV in the bedroom (not the same model), worked fine with the BW but I had dropout issues with the IceBox, tried different cables, including an 8K rated cable with no luck but once I swapped to the 8K input on the TV, bingo. I know it sounds weird, I think it's some sort of quirk with the Samsung.

This may not fix your issue but may be worth a try.  :)

This Samsung is only 4K. Thanks anyway.

Mike.
#25
Getting Help / Re: New IceBox - DOA?
December 12, 2023, 12:05:35 AM
Quote from: MD on December 11, 2023, 09:59:50 PMThe dongle needs to be matched to the keyboard so purchased as a pair, as is our remote (as best I know) but a wired usb one would work just as well, if they still exist.

I'll try and get down to JB or the like first thing in the morning and I should be available after that. Let's say sometine after 10am? The only firm commitment I have is that I am giving a customer some IT training between 1PM and 3PM, but allow 15 minutes before and after to set up and shut down. It's online training, so I don't have to go anywhere for it.

I'll send you a PM with my phone number in case you don't have it.

Mike.
#26
Getting Help / Re: New IceBox - DOA?
December 11, 2023, 09:45:17 PM
Quote from: raymondjpg on December 11, 2023, 09:28:15 PM
Quote from: nodyel on December 11, 2023, 05:51:52 PMAny other suggestions to try?
Are you by chance trying to install with an img file extracted from the gz archive?

No, I just downloaded the gz archive, and then told the balenaEtcher tool to use that to 'build' the usb contents. I didn't unarchive the gz file.

Mike.
#27
Getting Help / Re: New IceBox - DOA?
December 11, 2023, 09:41:55 PM
Quote from: MD on December 11, 2023, 06:31:54 PMHi Mike,

This is excruciating and if you/we can't resolve it asap I'll send another.

Do you have a wireless keyboard so you can stop the IceBox at its BIOS screen so as to choose an option to force  it to boot onto the USB?

Hi,

Unfortunately I only have a bluetooth ones :-(. All my cable ones have long gone, and the ones that i did have that were wireless with a dongle have gone as well.

I could try and get out again tomorrow and pick up a cheap one. Will any keyboad dongle one work, or are they dependant on a particular driver? Would a usb connected keyboard work? I know that some of them have drivers/software that you 'need', but I think that is just to give extra 'fluff' to do extra things with them. Should any keyboard work, even with a dongle?

Mike.

Mike.
#28
Getting Help / Re: New IceBox - DOA?
December 11, 2023, 05:51:52 PM
No luck with the reload.

First, I had a problems with the balenaEtcher program. It kept failing the validation phase at around 97%. Eventually I got a successful run after i turned of Windows autoplay, and setting the actions to take when a drive is inserted to 'take no action'. That let me get a successful run and I started testing.

Unfortunately, exactly the same result. I get the icetv logo, then the blank, then the 'no signal'. No sign of the front light flashing. I think I tried every usb socket, and with a fair mixture of the other external bits (tuners and dongle) being in or out.

Any other suggestions to try?

Mike.
#29
Getting Help / Re: New IceBox - DOA?
December 11, 2023, 04:01:00 PM
Hi Daniel,

As far as have noticed, no sign of any flashing - it just comes on and stays on. I just tried and it was solid for more than 5 minutes.

I'll give the reload a try.

Cheers,

Mike.
#30
Getting Help / Re: New IceBox - DOA?
December 11, 2023, 01:07:02 PM
Okay, I ducked out and picked up a couple of cables (I will have another use for one of them anyway as i want to upgrade one of my monitors).

One is 1.2m rated for 4K @ 18Gbps, and the other is 2m and 8K @ 48Gbps.

Exactly the same result - logo appears for a few seconds, then blank screen for a little while, and then TV reports no signal.

Mike.