Main Menu
Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Topics - ozstubbsy

#1
TLDR: If turning off your 4K TV "shuts down" your IceBox then see instructions in BOLD inside the Quote box below. 

Thought I'd share the results of maybe an hour of troubleshooting.

I have my IceBox connected to an AV Receiver which connects to a 4K TV. I was finding that every time I shutdown my Receiver and TV that the next time I turned my TV on and selected the Icebox HDMI on the receiver I was presented with a blank screen as if the Icebox had been shutdown. A restart via the power button on the box was the sole fix.

My initial thought was an HDMI ARC/CEC issue, but even with that disabled the issue peristed. In fact I eventually determined that all I needed to do was turn the TV off and then back on.  I then recalled reading in the setup instructions the text below:

Quoteset user to "Expert", then  "Display" and choose "Resolution" = 1920 x 1080p and "Refresh Rate" = 50.00.

Note: If a 4K TV is used and the IceBox is rebooted for any reason these settings should be rechecked as the TV connection can change them. If so set them back to as above.

Sure enough my display was set to 3840 x 2160. Once set to 1920x1080 the problem was resolved. So the advice is needed, but it was not obvious how critical it is to avoid 4K output as the only other reference to this related to audio sync issues. A link between 4K output and "shutting down" the IceBox was not obvious :-(

Hopefully there is enough text in this post so someone else with my issue finds their way here.
#2
Just one day into setting up my new IceBox and I fear I have bricked it.

I can start the box, but have a corrupted Kodi skin that means none of the navigable menu options are present. During Kodi startup the message "Skin shortcuts error" is displayed. This means I cannot go choose another skin as I cannot get to settings.  The obvious fix is a reset (probably hard), but pressing the power key on the remote just displays "Power" with no visible options below it (I think it locks up at that point as I need to then restart the box).

Can anyone suggest how to resolve this? Some options I have tried are:
  • ftp to the kodi area on the box - I suspect the skins will be inside storage somewhere. Since I can't find any details on the specific port I've tried 21, but that fails with Connection Refused
  • Connecting to TVHeadend on port 9981 from a web browser. That works, but nothing obvious there. Reality is I think it's LibreElec I want to get at not TVHeadEnd and NFI what port for that

I have a FLIRC controller and can access things like TV guide, recordings etc directly without issue via my Logitech Harmony Elite (I'm using the shortcut keys from the excellent word document I found here). I can also watch both live and recorded TV.

My fear is next step is to pack the thing up and send it to the IceTV sick bay :-(

Thanks in advance for any suggestions (and yes I should have just stuck with the default skin)