Thank you for the suggestions Leon,
Unfortunately I don't believe that this would work in my situation as I still have a P1 on my home network (it is called "Bedroom") and as I've hinted at before, there are issues with the manner in which the BW/IceTV number devices. In short, this was my configuration before the T4 arrived:
Device 1: dummy
Device 2: Loungeroom
Device 3: Bedroom
The device "dummy" was created when I previously had IceTV issues with one of the devices accepting series recordings: its been several years, and while I can't recall the exact logic, my recollection is that "dummy" was created by IceTV Support in order to combat a problem with how the BW's were "numbered" within the IceTV logic.
If I start fiddling around with the naming as you have suggested, then I think that the "Bedroom" device will get renumbered and will no longer accept recordings. I know that IceTV is moving to a different interface, and so maybe the way forward here is just to bite the bullet and tediously accept having to update stuff manually ... at least until I replace the P1.
One further question: you've answered with a suggested process, but implied in your answer is that creating (or recreating) a device as would happen during a setup (or resetup) process does not erase the series recordings that are attached to that device. Is this correct..? I'm expecting that at some point I will have to resetup the T4 and I'm curious as to how the attached recordings would behave when the device is "reinitialized" with the T4 widget (I am keeping in mind that with the P1/P2, I was prompted for which device I was using from a drop down menu).
Cheers,
David
Quote from: Leon K on June 26, 2015, 01:00:53 PM
Mister_Bimbo explicitly for your situation:
- Login to your account online here: https://www.icetv.com.au/cgi-bin/webmembers.cgi?op=editSubscription
- 1st device in account is your old P2 named : "Loungeroom" -> rename to "Loungeroom 2".
- Click Save.
- Create new device during T4 setup called "Loungeroom". This will be the 2nd device in your account.
- Login to your account online again here (or refresh the page to show the new device): https://www.icetv.com.au/cgi-bin/webmembers.cgi?op=editSubscription
- Rename the 1st device "Loungeroom 2" to "Loungeroom", and change the device type to T3.
- Rename the 2nd device ie. "Loungeroom" to "Loungeroom delete"
- Click Save.
- Delete the device "Loungeroom delete".
Unfortunately I don't believe that this would work in my situation as I still have a P1 on my home network (it is called "Bedroom") and as I've hinted at before, there are issues with the manner in which the BW/IceTV number devices. In short, this was my configuration before the T4 arrived:
Device 1: dummy
Device 2: Loungeroom
Device 3: Bedroom
The device "dummy" was created when I previously had IceTV issues with one of the devices accepting series recordings: its been several years, and while I can't recall the exact logic, my recollection is that "dummy" was created by IceTV Support in order to combat a problem with how the BW's were "numbered" within the IceTV logic.
If I start fiddling around with the naming as you have suggested, then I think that the "Bedroom" device will get renumbered and will no longer accept recordings. I know that IceTV is moving to a different interface, and so maybe the way forward here is just to bite the bullet and tediously accept having to update stuff manually ... at least until I replace the P1.
One further question: you've answered with a suggested process, but implied in your answer is that creating (or recreating) a device as would happen during a setup (or resetup) process does not erase the series recordings that are attached to that device. Is this correct..? I'm expecting that at some point I will have to resetup the T4 and I'm curious as to how the attached recordings would behave when the device is "reinitialized" with the T4 widget (I am keeping in mind that with the P1/P2, I was prompted for which device I was using from a drop down menu).
Cheers,
David