Main Menu
Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - mbiondo

#1
Well, following Ians advice I performed a firmware install using the Abundant caution technique and I also formatted the internal hard drive. I'm not sure which one did the trick, but I am now receiving IceTv scheduled recordings again. Thanks for the tips.

I hope this doesn't become a common practise as its not something I want to have deal with on a regular basis. 
#2
Topfield / Problems with Topfield 2400.... again..:(
August 10, 2014, 12:12:57 PM
So everything has been working fine with my Topfield for the last few months. Then as of two weeks, scheduled recordings that I make on my IceTv android app are not transferred to the topfield. Nothing has changed from my end. I've left the Topfield on for 2 days straight thinking maybe the recordings would transfer, but nothing.... So far I have;

1) Cancelled all recordings and tried to set them again
2) Performed 2 factory resets and tried resending all the recordings
3) Have tried resetting the EPG data

None of the above have worked. The internet connection is fine. It is a wired connection and I can access my icetv account, icetv epg data and the weather channel. I'm just not receiving any scheduled data....

Really annoying and frustrating. What else can I try?

Thanks...
#3
Well I've spent the last few days doing some testing and troubleshooting. So it seems there is a problem with the clock. The Topfield is not keeping accurate time. Let me explain. I noticed that when I turn it on and go to the guide, the time is always wrong. Sometimes a day out, sometimes only a few hours out. Most of the time, it will display the time of when the unit was last switched on. This is regardless of whether I have the time set to auto or manual mode. Further more, when the unit is switched off, the time displayed on the front of the unit is also wrong and does not advance. So if it displays 7:30 when I switch it off, it will just sit at 7:30 forever. So then when I program my recordings, with the time being all screwed up, the recordings are always missed. If I leave the unit switched on, the time does seem to correct itself after a while, but once back in standby mode (active or passive), the time is all screwed up again.

So I have tested all this with no internet, with wireless internet, with wired internet, with icetv, without icetv and standby mode in both passive (red circle at front when switched off) and active (time displayed on front when switched off). I have also performed a factory reset a dozen times, which seems to correct the issue for a short time before it reverts back to incorrect time.

My firmware is the latest, April 2013, I can't remember the actual number, something like TF 20.01.00 or close to. But I did investigate this and it definitely is the latest firmware.

So anyone have any other suggestions?

I'll be calling IceTv this afternoon to discuss options and organise sending the unit back.
#4
I've set up some series recording on IceTv but the shows are not being recorded. Everything seems to go smoothly; ie, all recordings that I set in my icetv app appear in the Reservations section of my Topfield. But the PVR will not wake from standby mode to record the show. I've noticed that when I turn the Topfield on, the EPG data is blank for about 30 seconds, before it redownloads from the icetv site. But I suspect that it is the blank EPG that is causing the failed recordings. So how does the Topfield 2400 store the icetv EPG? Is it cached on the hdd like on other units? If so, mine does not seem to be storing the EPG, so what can I do to address this? I don't want to leave the PVR switched on all the time.

Thanks