Main Menu
Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - pinarello65

#1
Mine worked perfectly with ICE-TV since I bought it over a year ago. It's just started playing up recently in the last couple of weeks when I tried to resolve a problem where it was recording ONE-HD on the wrong channel.  At the moment, my guide data is populated from 25/10 to 31/10 (As I type is 29/10).  If I hit the red button from the EPG settings page, at the moment it says SUCCESS, but nothing changes in the GUIDE or timer settings.  I'll have to wait & see what happens when the date moves past the last day of EPG data I've got. Maybe I need to format the hard disk (which would wipe the EPG data sitting there?), then presumably that would make it do a fresh fetch of 7 days EPG?

My set up is a little complicated, I have a gigabit network switch that everything plugs into via CAT6 network cable, PC, iMac, Toppy, Playstation3 and then a connection from the switch goes to a Draytek Vigor 2700VG modem/router.  A laptop & iPhone connect to the router wirelessly.  ICE-TV is set up with 3 tokens, for Toppy, PC (Win7 media centre with single tuner HD TV tuner card) and iMac (Elgato EyeTV, dual HD tuner).  So I have 3 devices collecting EPG data via my ICE-TV account.

Win7 & iMac both currently have the next 7 days EPG data & correctly set timers. The Toppy is the only one not doing it right. Ordinarily the iMac & Win7 dont get called upon to record very much because its only going to be when there's 3 or more things on at once & that doesnt happen very often. What I've had to do now is move all my regular shows to record on the iMac which does a pretty good job of turning itself on, recording the show & making it available to watch on the big TV via the playstation3, because what I can do is stream the recording from the iMac to the PS3 via a media server running on the iMac.

So it's a bit rubbish really...
#2
And it stops working again, with me changing nothing.  It seems like there's nothing you can do about it.
All the while my iMac & Elgato EyeTV work perfectly with ICE-TV, regardless of whether the Toppy is working or not.
#3
Topfield / Re: ONE-HD problem, recording wrong channel
October 27, 2009, 09:41:46 PM
after about 3 factory resets and set up from scratch, this problem resolved itself - but I got another issue with timers not being set, but then that seemed to fix itself after a day or so without me changing any settings on the Topfield.
#4
Mine has started working again AND recording the right ONE-HD channel which was the other problem I had.   Hopefully fewer troubles for me now.  And basically I've done nothing, it just started to work.
#5
In trying to resolve my other problem where it was recording the wrong ONE-HD channel (CH12 one digital rather than CH1 One-HD) I now seem to have this problem. Did a complete factory reset.  Set up the network, rescanned channels - noticed a fresh rescan of channels gave me duplicated CH1, CH10, Ch11, Ch12 (all the 'One' channels) so deleted the 2nd instance of each of those,  left the EPG to AIR and powered off.  Restarted. Set the EPG to ICE-TV, enter the username/password, ping test = OK,  get tokens succeeded.  Thought I was finally in business.  Looked at the LCN Settings which was entirely blank whereas previously it listed a number of channels.  Looked at the GUIDE, it gave me an error about not being able to do something (I forget..LCN?) and try again in 2 minutes.  Had this same error every time I tried for the next hour. Turned it off.  Tried it the next day, the GUIDE was working, but no timers are set.

After a couple more days, still no timers being set.  EPG ping test now says FAILED most of the time, get tokens lost my 'Toppy' token and it now says NONE.  Double checked username/password, network settings, everything seems fine. 

I have another token in my setup, 'iMac' which is for the Elgato EyeTV on my iMac and that is working perfectly using the same username/password as I have set on the Toppy. 
#6
Topfield / ONE-HD problem, recording wrong channel
October 18, 2009, 04:28:40 PM
On the ICE-TV web site, I set timers for recordings on ONE-HD.  In 'My Account'  ONE-HD is enabled, 'send to pvr as lcn' is set to "1".  I'm in Adelaide Region. 

Consistently the timers on the Toppy are set to record CH12 and not CH1.  On the the same page as above, I've tried unchecking One-Digital and changing the 'send to pvr as lcn' value of 12 to DISABLED, so in theory the only option is the HD channel.

When I set recordings from Interactive, I always select channel ONE-HD or 'prefer HD' options. 

On the toppy, when I look at the LCN settings, the only LCN available for ONE-HD is CH12.    I've tried deleting all the channels, factory reset, re-scan channels, re-setup ICE-TV from scratch, but all I get is LCN 12 as an option. 

So what I have to do is manually edit all timers that are set to CH12 and change them to CH1 otherwise, as has happened today with the MOTO-GP, I get a 5hour recording of the ONE-HD logo telling me the show is on channel 1 or 10.

firmware March 17 2009, V1.11.33, device 1.0.01

heeeeaaalp!

How do I stop this thing recording Ch12?   I'm stumped.   I went through support & the best they could suggest was deleting ch12 from the Toppy's channel list, which didnt work. It just reappears in the list.