Main Menu
Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - Briar

#1
Beyonwiz / Re: Another failed to get channel list
March 01, 2012, 05:57:09 PM
Well I have noticed that as I try to connect I get
try to retrieve device list,
Retrieved device list
Try to get channel list , this fails

Any thoughts
#2
Beyonwiz / Re: Another failed to get channel list
February 29, 2012, 06:41:53 PM
Peter
If I understand on the pvr are you have  dhcp enabled and and have no manual configuration set on the pvr.

In one of the many combinations I have received the "" message,
Out of interest can you ping 008.008 with your iinet connection

Thanks

Matt


#3
Beyonwiz / Re: Another failed to get channel list
February 29, 2012, 05:52:27 PM
Peter
with iinet as my isp 8.8.8.8 resolves ok but 008.008.008.008 doesn't, but with telstra both ip address resolve ok.
if i use opendns 208.67.222.222 i can ping ok but if i use 208.067.222.222 as required by the pvr it doesn't resolve ok

so where the issue is, is the question , you would think that if it was iinet not resolving correctly there would be a few more people screaming, so at this stage
I'm still looking for suggestions

That said i have rebooted everything turned them upside down before restarting etc!
 
Matt
#4
Beyonwiz / Re: Another failed to get channel list
February 28, 2012, 07:49:00 PM
Thanks Dave

The pvr won't let me enter 8.8.  It requires all 3 positions so it's .008.008 ... Which doesn't work, but I have tried direct entry of open dns and iinets , but as soon as you get a 2digit octet you have to put a 0 in front so it won't resolve I guess,

I have set the local network up with 3 in each octet so it appears to work for the wiz tv etc, When the manual dns is set to the local gate way

I agree it probably is dns issues but Im lost as to which way to go. I have just done a reboot of very thing but  no luck I guess I just need the right combination

Thanks

Matt
#5
Beyonwiz / Another failed to get channel list
February 28, 2012, 06:34:14 PM
I have a dp lite I ,

Connected to the Internet via a netgear 2001 wireless router,

I can ...
Use wiztv, access network shares etc
If I try to get to ice tv I get various errors from 'failed to get channel list' to network failures

It doesn't  make a difference if I have the dns as the local router or external dns server other than the length of time it takes to get the error message.

Also when using the wiztv it appears to always fail the first time with failed to load page, but the 2nd go it connects.

Any ideas

Thanks
Matt