Ten HD channel number change 1st October 2007

Started by Daniel Hall at IceTV, September 30, 2007, 05:28:15 PM

Previous topic - Next topic

Daniel Hall at IceTV

As of 1st October 2007 Channel Ten (in capital cities) will change there channel lineup to be the following:


  • 1 - Ten HD
  • 10 - Ten
  • 11 - Ten Guide
  • 12 - Ten HD
  • 100 - Ten Guide

The main change here is that channel 1 which was previously in Standard Definition will now be High Definition.

Anyone using channel 1 for recordings should change this to be channel 10.

On the morning of the 1st October we will be performing a check to ensure that this change goes through, once it does the guide will be updated with the new channel numbers.

Once the change is done the majority of PVR's will require a re-scan of the channels, all PVR's will need to re-map the channels. The best option to do this is a re-setup of the guide for your PVR, the details of which are located on our Support page at http://www.icetv.com.au/cgi-bin/websupport.cgi?op=list_faqs&faq_cat_id=26.

Please post any discussion in the thread located at http://www.icetv.com.au/iceforum/index.php?topic=780.0.
Regards,

Daniel.
CTO.

Daniel Hall at IceTV

UPDATE:

As of 8am the channels have not been changed in Sydney as yet.

I will check throughout the day and update when the changes are made by Ten.
Regards,

Daniel.
CTO.

Daniel Hall at IceTV

UPDATE 2:

As of 11am Sydney time the channel numbers still haven't changed.
Regards,

Daniel.
CTO.

Daniel Hall at IceTV

It looks like Ten have finally made the change listed above, except they have also removed the guide channels.

The new lineup for Channel Ten is:


  • 1 - Ten HD
  • 10 - Ten
  • 12 - Ten HD

The guides have been updated to have the new channel numbers in there.

As before if you have troubles picking up the channel or seeing the guide please run through the setup of your device again and you should be up and running.

Please discuss in the existing thread at http://www.icetv.com.au/iceforum/index.php?topic=780.15.
Regards,

Daniel.
CTO.