"The matching channel was found, but there was no program in the MCE guide"

Started by parse2, April 05, 2007, 07:45:29 AM

Previous topic - Next topic

parse2

Daniel,

since changing to PIMP 2.0.0.9 on MCE2005, and scheduling a new programs, I get the following error, adn the dreaded "black esclaimation mark"

On a series enrty, it worked the first time, then the subsequent entries come up with this error.

==============================================
The matching channel was found, but there was no program in the MCE guide at that time.
- - - - - - SchedulerTimerTaskData
- - - - - - - Pimp Channel ID: 2
- - - - - - - Pimp Channel Name: ABC
- - - - - - - Pimp Network Name:
- - - - - - - Start: 3/04/2007 10:30:00 AM (3/04/2007 8:30:00 PM local)
- - - - - - - Duration: 00:50:00
- - - - - - - Recurrence: 0
- - - - - - - Last Error:
- - - - - - - MCE Channel Number: 22
- - - - - - - MCE Channel Name: ABC
- - - - - - - MCE Channel CallSign: ABC
- - - - - - - SE: <SEID SrvID="1" SourceId="0" PrID="0" Start="0001-01-01T00:00:00" Duration="P732768DT14H35M" ChID="22" />

=================================

Also found this entry
==========================
Couldn't get the state of the MCE task. The task will be removed.
- - - - SchedulerTask
- - - - - Task UID: 15253993308041579332
- - - - - Task State: TS_FAILED
- - - - - Task Type: 1
- - - - - - SchedulerTimerTaskData
- - - - - - - Pimp Channel ID: 2
- - - - - - - Pimp Channel Name: ABC
- - - - - - - Pimp Network Name:
- - - - - - - Start: 8/04/2007 6:30:00 AM (8/04/2007 4:30:00 PM local)
- - - - - - - Duration: 00:30:00
- - - - - - - Recurrence: 0
- - - - - - - Last Error:
- - - - - - - MCE Channel Number: 22
- - - - - - - MCE Channel Name: ABC
- - - - - - - MCE Channel CallSign: ABC
- - - - - - - MCE Title: First Tuesday Book Club
- - - - - - - MCE State: DVRSTATE_REDUNDANT
- - - - - - -          :  ()
- - - - - Task Action: 1
- - - - - - SchedulerRecordActionData
- - - - - - - Local Url: file://recording[/font][/font]
===================================

user: jkmartin

any clues??

John

PS: tried suggestion from http://www.icetv.com.au/iceforum/index.php?topic=535.0 and it did not work, still the black esclamation mark!!

parse2

Ok, so I updated PIMP again to v2.0.0.13, and now I get error
==============================================
System.IO.FileNotFoundException: Could not load file or assembly 'ehiProxy, Version=6.0.6000.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified.
File name: 'ehiProxy, Version=6.0.6000.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'
   at IceTV.MainForm.putLocalTasks(scheduler oScheduler)
   at IceTV.MainForm.processTasks()

WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure logging.
To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].

==========================================

Daniel Hall at IceTV

Quote from: parse2 on April 05, 2007, 11:00:43 PM
Ok, so I updated PIMP again to v2.0.0.13, and now I get error
==============================================
System.IO.FileNotFoundException: Could not load file or assembly 'ehiProxy, Version=6.0.6000.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified.
File name: 'ehiProxy, Version=6.0.6000.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'
   at IceTV.MainForm.putLocalTasks(scheduler oScheduler)
   at IceTV.MainForm.processTasks()

WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure logging.
To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].

==========================================

One thing that can cause this is having installed the Vista version of PIMP on MCE2005. If you uninstall and then install the latest client for PIMP for XP MCE2005 then you should be right to go. The latest XP MCE2005 client can be downloaded from http://www.icetv.com.au/cgi-bin/downloads.cgi?op=get_file&number=7.
Regards,

Daniel.
CTO.

parse2

so what version is the latest.. I was running v2.0.0.13??
PIMP V2.0.0.9 prompted me to update, so I clicked yes nothing worked since

Daniel Hall at IceTV

Version 2.0.0.13 is the latest, but you need to ensure you are running the MCE2005 version and not the Vista version.
Regards,

Daniel.
CTO.