Blurry Picture

Started by TimC, July 15, 2016, 10:03:20 PM

Previous topic - Next topic

TimC

I have discovered that my Skippa is generating a blurred picture, or more to the point, a double image on the bottom half of the screen getting worse the closer it is to the bottom of the screen.

Note, I switched to a Toppy input and the picture was fine, it's the Skippa and not the monitor.
I was initially sending 1080I. I tried 1080P with no improvement. 720p was fractionally better but not really worth the picture quality loss.

I am hoping that some of the more knowledgeable may know something I can try.

I not afraid to replace the odd component, but if the board is all flow soldered it would be beyond my equipment and skills.
Icebox, Fetch box (Not IceTV Capable)

IanL-S

Have you tried a rest to factory settings? If that does not work you could try reinstalling the firmware.

Ian
IceTV: IceBox + BYOB IceBox + 2xTRF-2400 + 2xTF7100HDPVRtPlus + SKIPPA [RIP] + T2 + U4 + V2
No IceTV: a few Toppys and T2
Synology NAS
Check out the oztoppy wiki and oztoppy Forum for Toppy help

TimC

Thanks Ian. 

It was actually the HDMI input on the TV that I was using for the Toppy. 
All is Good now.
Icebox, Fetch box (Not IceTV Capable)

IanL-S

Quote from: TimC on July 17, 2016, 01:58:35 PM
Thanks Ian. 

It was actually the HDMI input on the TV that I was using for the Toppy. 
All is Good now.

Good news. I have had issues with my ageing Sharp TV - have to periodically do a factory reset when it starts having issues with HDMI input.

Ian
IceTV: IceBox + BYOB IceBox + 2xTRF-2400 + 2xTF7100HDPVRtPlus + SKIPPA [RIP] + T2 + U4 + V2
No IceTV: a few Toppys and T2
Synology NAS
Check out the oztoppy wiki and oztoppy Forum for Toppy help

Seronne