Messages

I'm getting 'No matching service' emails for Wagga Prime. My account is set for Prime southern/60...is that correct or not, please? I am getting the epg for 6,60,61 etc.

Cheers, Dom.

Hi Dom,

6, 60 or 61 are okay. But for Wagga you should be using Prime Northern. It is more to do with what shows Prime broadcasts in your area than where Wagga is located in the NSW Regional Southern area.

Ta. The 'north' fix worked. Don't know how or why I changed it since Prime was not affected by the recent changover.

Cheers, Dom.

If you have a Beyonwiz T series, you can also get "No matching service" errors for timer conflicts (don't ask  ::)), i.e. when you have timers for programs on more broadcasters than your box has tuners for.

It may be worth a check to see if that could be the cause.

But the error can also reflect a real mismatch between the service/channel selection information in the timer and the channel information in the T series box.

Thanks. I use the T3 for 7,9 & 10 & the T2 for 2 & SBS (Both have added usb tuner). Hopefully that should cover me? The 'North' fix worked.

Cheers, Do.

I'm getting 'No matching service' emails for Wagga Prime. My account is set for Prime southern/60...is that correct or not, please? I am getting the epg for 6,60,61 etc.

Cheers, Dom.

Win HD in southern NSW is now fixed.

Thank you, Dave.

You mean thank you Daniel as it was Daniel who fixed the problem.

Sorry. I was thinking in 3D. Thank you, Dan. Thank you Dave. Dom  ???.

Win HD in southern NSW is now fixed.

Thank you, Dave.

Howdy. Can't get epg for win wagga hd (80). My account is set for WIN HD 80 & is ticked. I am receiving the broadcast (1920x1080i)...what have I done this time? :-). All other WIN epg ok.

Which recorder do you have?

Wiz T2 & T3. Neither getting WIN HD epg.

Howdy. Can't get epg for win wagga hd (80). My account is set for WIN HD 80 & is ticked. I am receiving the broadcast (1920x1080i)...what have I done this time? :-). All other WIN epg ok.

Hi Dave. I have just gone through the icetv setup routine on T3 to make sure. I've put a little pressure on the T3 tonight with a movie rec from ONE & added a series on ONE from tomorrow. Here's hoping.

The triplets & frequencies are identical. I have learned to check these as sometimes the wizzers collect the freqs from Mt Ulandra & pixellate. Usually Prime only is affected. My Humax always got the good ones! I then scan the specific freq from Coota, clearing the previous freqs in the process. Basically, all my stations are received very nicely.

That last link led me to "The requested topic does not exist." My software is always the latest (not beta). They post, I update!

Cheers, Dom.

OK: result of a icetv plugin update gave me...Well I wish I knew where the log went. Anyway I got a screenshot but the actual results were,

The movie A Few Good Men 'seems' to have setup ok, showing in the T3 timer list & shaded red in the EPG. However a few conflicts appear in the log but then says A few good men updated ok.

The series Planet Earth is showing in the T3 timer list but showing no red shading. The log says planetearth updated ok. Go figure.

I've waited for a while to allow my head to clear. Yesterday I tried to set Sons of Anarchy (ONE) as a series on the T3 from icetv.com.au. Today I got a 'No matching service' email. I then switched the timer to the T2 & it appears to be setup ok as per the T2 timer list & T2's onscreen guide. Is there any clue here as to what is going wrong?

There is no suggestion of the T3s hdd being full. It would be fantastically coincidental if the T3 was full or the signal went bad each time a timer was set for ONE, & only ONE  :). Also, that link seems to suggest the problem of 0mb recs occurred in T4s only. As for catchup tv, where I am is 4G only & the data allowance is impossibly low. How I wish I was back in Sydney & on cable  ::).

If you can't think of anything else I'll ask at the wiz forum.

Cheers, Dom.

It's strange that the timer list in the T3 shows the 'waiting' flag but is not showing shaded red in the onscreen guide. The timer(s) in the list do not remain afterwards. Also very strange that it only affects ONE Wagga. No HD Ten here yet.

As I say, any of these ONE Wagga shows WILL record if entered via the onscreen icetv guide (on both wizs) &  they are soon reflected in the online (Icetv.com) my week column.

Anyway, I have now changed all ONE Wagga series progs to the T2 & we'll see what happens.

Ok for clarity, onscreen does mean on the tv, online is via the icetv website. The timer 'list' does refer to the T3/timer button.

Thanks, Dom.

Howdy. I used the icetv form to submit my problem but no response as yet. Things have escalated since.

I discovered after going to my T3 Files folder that all Ripper St recs were 0mb. Same with Last Man Standing. These were sent from the icetv online guide. So I've missed the entire new series of RS(!) & LMS. These progs were on ONE Wagga Wagga. I noted that on the T3 timers page the progs are showing as waiting but are not shaded red in the onscreen icetv guide.

So I tried directly adding timers for ONE in the onscreen icetv guide & all became shaded red & all were recorded. That's how I sent it to the online form...

All other timers seem ok for other stations & SC10 & ELEVEN (LCNs 5 & 55). However...

While waiting for a response I followed (I thought) protocol & deleted all timers from the T3 timer page. I then went online & resent all timers for T3 & then used icetv plugin to update. No timers for this device! I checked the online page for My Series & all were there. So I went to My Account & resent all again but no joy.

Any ideas out there, please. This is getting tiresome  :( .

Dom. Also have a T2. T2 for abc & sbs & T3 for others.

Wagga. From Bimbadeen Tower (Cootamundra).

TSID 0x327d (12925d), ONID 0x3273 (12915d)

SID...
8  WIN Wagga         0x0781 (1921d)
80 WIN Wagga HD    0x0792 (1938d)
81 WIN  Wagga        0x0784 (1924d)
82 GEM Wagga         0x0786 (1926d)
83 GO! Wagga          0x0785 (1925d)
84 LIFE                      0x0790 (1936d)
85 Extra                    0x0788 (1928d)
86 GOLD                    0x0787 (1927d)
88 GO! Wagga          0x0782 (1922d)

In particular the Wagga Wagga list.  There are so many incorrect listings over the past 4 weeks that I have to look at 'YourTV.com.au' to find out what is actually on & then cross reference. Is there a problem somewhere in your system or what? Is the new organisation up to the task, I wonder? I 'only' lost about 3 years worth from the last mess up & now I'm paying to look up my own epg!

Since I must make manual recordings for all of these missing programs I have to wonder if there is any value in your service anymore. Please look closely at however you come up with your epg as I am about had it with this    :( .

Salt & The Sum of All Fears are just 2 examples on Go & Win on Sun 14th. There have been way too many of late just like them.

Sorry for rant, but...

'Which universe are we in' at 7.30 is showing as 'swallowed by a black hole'?