Main Menu
Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - vincent

#1
With ABC2 re-enabled and the STD versions of 9 and 10 disabled I was not getting reboots but the toppy locked up, it would not respond to any inputs. I have now disabled ABC2 again and its back working.

Hopefully top field will do another new f/W to fix this issue at some point.
#2
Last night I turned ABC2 back on but turned off Channel 9 and 10 as I now tend to only watch the HD channels of 9 and 10. I always had my timers set to pick the HD channel so have not seen this cause an issue.  Its been running all day with no issues. Now I know the problem on a full reset I will just start with a few extra channel disabled and ABC2 will be fine as I don't have many timers on those channels once back and stable I can just turn it back on and wait for the toppy to catchup.

Its not idea but knowing the problem its not hard to work around it unless we get a F/W update that fixes it correctly. Given I found this thread with google most users will find a working solution and given its ICE causing the memory overflow then then know where to look.

#3
Just to add some more to the discussion, since I disabled ABC2 I have had no issues. The information given above does help to explain the issue, I will check what channels I have enabled but both times I have had issues it has been because I go chasing the new channels TENHD and then 7Flix. I think the second time I pressed the red button when in the ICETV setting on the 2400 to refresh the EPG data and bang it started the rebooting loop. I was playing around trying to get stuff sorted, I am also guessing a full reset will cause issues as that will trigger a complete refresh and collection of lots of data to process. This has to happen from time when timers stop being set automatically, look forward to that day.

Now that I have it fully working and no reboot since my last post I don't want to touch the 2400 as its working exactly like I want it (with no issues)! I am not missing ABC2 as I don't watch it but it does leave a big hole in JustEPG.
#4
Okay I nearly purchased a new machine today as it keep rebooting. I still have the issues as of 7:30PM Perth time. I have disabled ABC2 on my ICE account menu for channels and am trying to get the top to stop rebooting. I got into the menu for ICE and pressed the red button and then restarted the toppy.

Am I meant to turn ABC2 back on, I can forgo the data if that stops this issue as it driving me mad and I am missing shows.

I will say I am happy on certain days to try and play with different settings.
#5
You can fix this by installing a TAP which will regenerate the missing 2 files to allow FF FR.  Look in the topfield forum for more information
#6
General Discussions / New Shows List not being updated
January 24, 2011, 10:05:19 AM
I have noticed that my "New Shows" list is not being updated.  Example Hawaii Five-O does not appear in the list, but in the guide it does have the gold star next to it.

Anyone else having this issue, as I look at the New Show list all the time?
#7
IceTV EPG Content / Heartbeat - Saturday 16th on 7TWO
October 11, 2010, 04:25:25 PM
The repeat flag is missing, these are not first runs
#8
While you added Yellowstone into the 7:30 slot and move Midsomer Murders out to 8:30 I still have the next two shows appears twice.  The wrong time plus the right time.  Interesting thing is that MM has the right information within the data.  I am not sure how the EPG gets flushed on the TRF2400?
#9
I am really starting to like iview as I missed GG which was scheduled.  I had a look on the ABC website and they don't even have a TV guide for ABCHD.
#10
I am in Perth but you are right all fixed.  Thanks
#11
Are you sure it starts at 7:30pm when it starts at 8:30pm on ABC1 ?
#12
Correct getting confussed about ABC1 and ABC2.
#13
Quote from: JPP on September 27, 2009, 10:00:37 AM
Quote from: vincent on September 27, 2009, 12:54:17 AM
I have had a few yellow triangles but overall has not been that bad.  But I do check to see what is happening daily.  I dont turn the machine off.  That way I can set timer from work.

I ran in manual time for a while and that caused issues with the start time of timers, ir they appeared as 6:02 and not 6:00pm.  Switched to auto time and that has resolved it self to a degree.  Would love prepadding.

I am getting issues with late changed to HD channels that is starting to get anoying, but I blame tv stations
Were these triangles (which supposedly comes from the PVR indicating a timer/reservation programming error/clash) a result of YOU making a mistake (too many programs for 2 tuners to handel) or did they come up when they shouldn't have?

Some are my mistake but I have had some that I have no idea why - example Channel 7 news on one day.  I have just learn to do a quick check each night
#14
Quote from: JPP on September 27, 2009, 10:07:31 AM
Quote from: vincent on September 27, 2009, 12:54:17 AM
I have had a few yellow triangles but overall has not been that bad.  But I do check to see what is happening daily.  I dont turn the machine off.  That way I can set timer from work.

I ran in manual time for a while and that caused issues with the start time of timers, ir they appeared as 6:02 and not 6:00pm.  Switched to auto time and that has resolved it self to a degree.  Would love prepadding.

I am getting issues with late changed to HD channels that is starting to get anoying, but I blame tv stations
When you say you set the timesr from work, is that via ICE or directly from the Toppy web interface as manual recordings?


Ice interactive
#15
I don't believe this is a repeat, the show description suggest it is a first run.