I have discovered that my Skippa is generating a blurred picture, or more to the point, a double image on the bottom half of the screen getting worse the closer it is to the bottom of the screen.
Note, I switched to a Toppy input and the picture was fine, it's the Skippa and not the monitor.
I was initially sending 1080I. I tried 1080P with no improvement. 720p was fractionally better but not really worth the picture quality loss.
I am hoping that some of the more knowledgeable may know something I can try.
I not afraid to replace the odd component, but if the board is all flow soldered it would be beyond my equipment and skills.
Have you tried a rest to factory settings? If that does not work you could try reinstalling the firmware.
Ian
Thanks Ian.
It was actually the HDMI input on the TV that I was using for the Toppy.
All is Good now.
Quote from: TimC on July 17, 2016, 01:58:35 PM
Thanks Ian.
It was actually the HDMI input on the TV that I was using for the Toppy.
All is Good now.
Good news. I have had issues with my ageing Sharp TV - have to periodically do a factory reset when it starts having issues with HDMI input.
Ian
Hi everyone