Text only | Text with Images

IceTV Forum

IceTV Guide for IceTV enabled PVRs => Windows Media Center => Topic started by: adsjc on April 11, 2010, 01:04:18 AM

Title: Re-enable Inband for Channels not supported by ICEtv?
Post by: adsjc on April 11, 2010, 01:04:18 AM
Is there a way I can turn on the InBand EPG for a unsupported channel?

In perth we have a new channel WTV and I can't turn on the Inband guide. ("enable inband" option is missing from media center)

Title: Re: Re-enable Inband for Channels not supported by ICEtv?
Post by: mike_hammer on October 08, 2010, 10:46:40 PM
this issue has been read over 300 times Its a bit of a shame that ICE TV perhaps dont reply as there is so mush interest in the problem
Title: Re: Re-enable Inband for Channels not supported by ICEtv?
Post by: cam on October 09, 2010, 01:27:31 PM
Maybe try from the main menu: Settings, Guide, Edit Channels; select the channel; then select Edit Listings.  Should be an inband enable there.  Hope that's what you're after.

Cam
Title: Re: Re-enable Inband for Channels not supported by ICEtv?
Post by: a4x4kiwi on November 02, 2010, 09:59:46 AM
Bump.

Even though inband "Use listing from broadcaster" is enabled for TVS channel 44 in Sydney, no guide data appears.

It seems IceTV Interactive has completely disabled inband scanning for all channels even those where IceTV has no data available.

Has anyone figured out how to get TVS (or other non IceTV channels) listings into the guide?

Cheers, Mal.
Title: Re: Re-enable Inband for Channels not supported by ICEtv?
Post by: reddle on November 11, 2010, 07:47:17 PM
Have a look at

http://mobilewares.wordpress.com/2010/10/24/launched-big-screen-byremote-1-0a-final-release/

It uses the IceTV service but allows inband and lots of other features
Text only | Text with Images