Messages

1. Interactive Recordings not downloading any more.
2. Guide for Sunday 19/9/10 only showing from 10pm onwards.

Could guide be corrupted and if so, should I delete it (is this possible?) and hopefully it will download again.
I see there are old guides on system going back to 31st August.

My PVR is the Topfield TF7100HDPVRtPlus.

Everything is working now. Some mix up with the passwords at Icelink end.

Seems I was under the wrong assumption. I will have another go at this problem.

That would mean I would have to change password and User ID on PVR to numbers. Also I would have to communicate this to the provider of EPG, and firmware.

Filezilla has recognized Topfield and my ID, for the FTP, but not the password in Topfield, which I have to sort out.

I did a factory reset to remove the settings. The DHCP then obtained the settings automatically from the TP Link which are now:
IP 192.168.1.101
Subnet Mask: 255.255.255.0
Gateway: 192.168.1.1
Primary DNS: 192.168.1.1
Secondary DNS: 0000

TP Link Settings

IP: 192.168.1.1
LAN IP: 192.168.1.1
default gateway: 202.7.179.74
WAN IP:123.243.243.128
DNS: 203.12.160.35
Status: Up

As you see the Topfield settings are now different and the TP Link the default gateway has changed. I could not find the Subnet mask on the TP Link.
With all the new info, should it not work?

My PVR settings are as follows: IP 192.168.100.200
                                           Subnet Mask: 255.255.255.0
                                           Gateway:       192.168.100.1
                                           Primary DNS:   164.124.101.2
                                           Secondary DNS: 211.232.100.1
TP-Link TP8810 Modem/Router   LAN: 192.168.1.1
                                            Default gateway:  202.7.179.90
                                            WAN IP: 123.243.243.128
                                            DNS 203.12.160.35
The PVR settings have changed,they were almost a match before. Seeing as they are supposed to be Static, how could they change?
So what has to be changed?

As it turns out, I cannot connect to the server. Must be some error in the configuration which I have to sort out. I am using Fizezilla but have only inputted the Topfield IP address.
Should I be also using my router IP address as well?

Having set up User ID and Password, I cannot go any further as the "Device Type" is greyed out. I have resent the data on the website.
What else should I be doing?  I am using the Netcomm Home Plugs via Modem/Router.