Playback Problem with IceBox

Started by Keith, January 27, 2023, 04:59:45 PM

Previous topic - Next topic

Keith

I have not been successful getting Icebox to play any recordings or live TV. Playing a recording or live TV gives about 3 seconds of video with no sound then the picture freezes. Occasionally 100 will display onscreen as the picture freezes (image attached).

I have tried the IceBox on 2 different TVs, a 6 month old LG C2 and a 10 year old B&O HD screen with the same problem appearing on both. The HDMI cable works fine with my PS4 so I know that is not the issue.
I set up the unit as per instructions, including the update pause and the output resolution/refresh rate. The IceBox time display is incorrect. 1:20pm my time, IceBox displays 2:50am and I cannot see anywhere to correct this. Peculiarly, IceTV on the IceBox records programmes at the correct time.

My IceBox is now set up on the LG C2 TV which I have reset to factory default without any change in playback. The screen is in "Standard" setting with Filmmaker, Reduce Blue Light and Trumotion turned off.
I hope someone can point me in the right direction to get my IceBox working. It's been a pretty frustrating exercise so far!

Ian_AW

What have you set the display resolution and refresh rate to?

vader1111

Keith, my IceBox is attached to an LG CS, which uses the same version of WebOS as your C2.  I find that my IceBox reverts to 2160p/30Hz every time I reboot it.  The IceBox simply isn't capable of upscaling from 1080 to 2160, so things get very ugly, very quickly.

The fix is to go into Settings -> System -> Display, and change the Monitor Resolution to 1080p and the Monitor Refresh Rate to 50Hz.

I find that it reverts every time I reboot the IceBox, which is a pain in the backside.  Other users don't have this issue, so maybe it's an LG thing.

Let us know if problems persist.

Keith

Thanks raj1954 and vader1111 for your help. I had set the resolution to 1080p and 50Hz refresh rate in the initial setup but just checked and it was 2160p/30Hz as vader1111 noted.
I have reset to 1080p and 50Hz. Unfortunately this has not fixed the problem and playback/live TV still gives a few seconds of video with no sound then freezes.

vader1111

I'm wondering if the problem is due to an extremely weak signal.  Are you in an area with multiple transmitters?  It's possible that the IceBox has decided to use the weaker of the two signals.

IanL-S

Another possibilty is that the IceBox is reverting to software decoding rather using than hardware assisted decoding. I have this problem with both my IceBox and my build-your-own IceBox. I moved the HDMI cable from HDMI 1 to HDMI 2 and the problem went away.

Ian
PS Build-you-own IceBox installation is currently limted to beta testers.
IceTV: IceBox + BYOB IceBox + 2xTRF-2400 + 2xTF7100HDPVRtPlus + SKIPPA [RIP] + T2 + U4 + V2
No IceTV: a few Toppys and T2
Synology NAS
Check out the oztoppy wiki and oztoppy Forum for Toppy help

Keith

Moving the HDMI cable solved the playback problem! Thank you IanL-S.

I get perfect picture and sound when connected to the HDMI port closest to the headphone socket.

Thank you to all those offering advice, very much appreciated :)

IanL-S

Thanks for the update Keith. It appears that it is not just an issue with the beta testing units or my buil-your-own. Does not seem to be BIOS issue as the IceBox use AMI and my build-your-own uses Intel bios. Could be something to do with the chipset driver used by LibreELEC operating system; I doubt that it is a physical problem.
IceTV: IceBox + BYOB IceBox + 2xTRF-2400 + 2xTF7100HDPVRtPlus + SKIPPA [RIP] + T2 + U4 + V2
No IceTV: a few Toppys and T2
Synology NAS
Check out the oztoppy wiki and oztoppy Forum for Toppy help