Main Menu

Soft and Hard Resets

Started by TimC, August 31, 2023, 08:20:14 PM

Previous topic - Next topic

DeltaMikeCharlie

Quote from: MD on September 02, 2023, 12:39:18 PMDMC, we are going around in circles a bit here.
OK, let's try this:

For simplicity, let's say that the SSD on the IceBox that I received came with 2 pre-configured partition.  The first partition is read-only and contains the 'firmware' (Linux + Kodi + Tvheadend).  The second partition is read-write and contains the '/storage' directory that users will eventually fill with settings, recordings, etc.

Will the replacement SSD be:

1) Totally blank, unpartitioned and unformatted;
2) Pre-installed with the default 2 partitions as described above?

If 1) above, then the whole SSD (both partitions) will need to be cloned by either ICE or the user.
If 2) above, then only the read-write partition will need to be cloned OR backed-up and restored by ICE or the user.  Also, which version of the IceBox firmware will be pre-installed?

IanL-S

Well spotted MD. I have two USB 3 (A) USB SATA adapters. One (a UGREEN) supports external power connector (useful for 3.5" SATA drives that can be problematic when relying on USB port for power) - works well with 2.5" SSDs and HDDs as they need less power.
IceTV: IceBox + BYOB IceBox + 2xTRF-2400 + 2xTF7100HDPVRtPlus + SKIPPA [RIP] + T2 + U4 + V2
No IceTV: a few Toppys and T2
Synology NAS
Check out the oztoppy wiki and oztoppy Forum for Toppy help

TimC

Icebox, Fetch box (Not IceTV Capable)

TimC

Icebox, Fetch box (Not IceTV Capable)

TimC

All,

I have added some key parts of the discussion above to the Replacement SSDs thread as the discussion about the SSD s is more relevant there.

I would like to return this thread to its original intent, which was to identify an approach to restore a Plugin setup following a Hard or Soft reset without having to rebuild it all from scratch.
Icebox, Fetch box (Not IceTV Capable)