Main Menu

Replacement SSDs

Started by MD, August 26, 2023, 12:10:22 PM

Previous topic - Next topic

kazz

I got the replacement SSD email today too, I got one email but I assume that will cover both units?

kazz

I'm happy to say I got tracking info from AusPost for mine yesterday.  :)

Thank you to the IceTV gang for addressing this issue for us. 

kazz

MY replacement SSD's arrived today, one is installed, it's a simple process really, 8 screws and the connector  and done.  :)

Hati

Quote from: kazz on October 10, 2023, 05:47:08 PM8 screws and the connector  and done

Ok, and? How does it work??

kazz

Quote from: Hati on October 10, 2023, 08:15:02 PM
Quote from: kazz on October 10, 2023, 05:47:08 PM8 screws and the connector  and done

Ok, and? How does it work??

Yeah so far so good, working as expected.

Keith

I installed the replacement SSD (not cloned) without difficulty and ran through the setup as a new IceBox OK.

The online IceBox Setup and User Guide instructs to change the refresh rate to 50, while the new SSD software is set to to 60. Do I need to change it to 50?

IanL-S

Apparently 50 corresponds to the TV transmission. Using 60 or greater may cause difficulties particularly when playing back a recording as it may revert from hardware assisted to software decoding (which requires considerably more resources).
IceTV: IceBox + BYOB IceBox + 2xTRF-2400 + 2xTF7100HDPVRtPlus + SKIPPA [RIP] + T2 + U4 + V2
No IceTV: a few Toppys and T2
Synology NAS
Check out the oztoppy wiki and oztoppy Forum for Toppy help

Chrilynn2

At the risk of repeating a question, is there any timetable for new Icebox sales recommencing?
I'd planned to invest in one as two of by Beyonwiz PVRs have died, and I'm limping along with old less friendly ones.
It would seem that the SSD issues have now been resolved.
Cheers
Chris

MD

The new SSDs (Solid State Hard Drives) have arrived so we can now update the remaining stock, but to ensure they are not sold before you can purchase we could do a "back door" purchase before the store goes live.
 
Can you let me know what of the following configurations of the IceBox you wish to have, plus the optional ancillary antenna splitter.
 
1. A single dual tuner IceBox (two tuners) at $449
2. Two dual tuners IceBox (4 tuners) at $548
3. A splitter at $10
 
Once you let me know which of the above you wish to purchase we'll send a URL (website link) which will take that choice straight to the checkout on our store where you can purchase and then it will link to our delivery system via Australia Post which will then issue a tracking number (this can take 24 hours).

MD

I should add that the requirements would be best lodged via a support ticket so we can manage it within our system.

Chrilynn2

Hi MD, I apologise for my delay in responding, I have sent you a personal message, with some questions. If you do not receive this, or find it inconvenient, please let me know, and I will post my questions in this forum
Cheers
Chris

TimC

Hi all,

I am finally getting around to swapping the SSDs, however on restarting the BIOS screen presents and I can go no further.

I am not sure if I need to clone the Icebox software first or not.

I originally advised that I intended to clone my IceBox as I had a bunch of plugins installed, but I have since decided to reinstall them as some weren't working.

I had assumed that the new SSD would have the software installed regardless of the Cloning request, but perhaps I am incorrect.

Can someone let me know if the new SSD would have had the software installed if the intent was to clone it?

 
Icebox, Fetch box (Not IceTV Capable)

Daniel Hall at IceTV

Hi Tim,

If the drive was intended for cloning then it would not have any software on it at all.

However it is a fairly easy process to install it now that the new drive is installed.

The firmware is the same as the firmware that is used on the BYOB machines, and can be downloaded from https://support.icetv.com.au/hc/en-us/articles/6591367595407-IceBox-BYOB-Installation-Links and this page also has links to the software to create the USB installer.

Please let us know if you have any questions.
Regards,

Daniel.
CTO.

TimC

Thanks Daniel.

That makes sense.  It was my original intention to do it that way any way.

I'll have to go buy myself a cable.
Icebox, Fetch box (Not IceTV Capable)

Daniel Hall at IceTV

Hi Tim,

You don't need a cable to just load on that firmware, just a spare USB stick (as the installer takes over the entire USB stick, but it can be easily re-formatted after use)
Regards,

Daniel.
CTO.