Currently available IceTV-enabled PVRs

Started by mingus, June 06, 2022, 12:57:23 PM

Previous topic - Next topic

vader1111

Quote from: IanL-S on November 01, 2022, 12:18:44 PMvader1111

Considering resuming paying recording on the IceBox that you have been playing on a Beyonwiz (or the other way around), since Enigma2 devices use a the same recording format, resuming playing should work. The recording is in the *.ts file (MEPEG2 program stream or H.264 program stream), the EPG data is in the *.eit file, and the *ap, *ts.cuts, *.meta and *.sc. The *.ts.cuts
stores the last position where the recording was stopped while playing - so if that file is present things should be OK.

Ian
 
Awesome!  I hoped this would be the case, when I read that the IceBox would be Enigma2 (the same as Beyonwiz).

IanL-S

For those of you who wish to find out more I suggest looking at the wiki:
https://wiki.libreelec.tv/
and the Forum:
https://forum.libreelec.tv/

Ian
IceTV: IceBox + BYOB IceBox + 2xTRF-2400 + 2xTF7100HDPVRtPlus + SKIPPA [RIP] + T2 + U4 + V2
No IceTV: a few Toppys and T2
Synology NAS
Check out the oztoppy wiki and oztoppy Forum for Toppy help

DeltaMikeCharlie

I have another set of questions, this time concentrating on the user experience.

I am not the primary PVR user in our household, merely the primary technical support resource.

We have Topfield and Fetch PVRs and the thing that they have in common is that when they start, they default directly into live TV.  This is normally on the service that was being viewed as the unit was powered-off, but can also be the last recorded channel if all tuners needed to be used for recordings.

Q1: What will the default power-on state of the IceBox be?
Q2: If it is not live TV, what is the default power-on state?

With both Topfield and Fetch, I can get to the EPG with one key press.
Q3: How many key presses will be required to display the EPG?
Q4: Will users be able to set single/series recordings from the EPG screen?
Q5: Will EPG keyword searches be possible?
Q6: If so, will the matching be performed locally on the PVR or remotely on the Fetch server?

To access TV recordings (excluding scrolling), Topfield requires a single key press, whereas Fetch requires four.
Q7: How many key presses will be required at access recorded TV from watching live TV?

To view a list of scheduled recordings, Topfield needs two key presses by default but an add-in can reduce that to one, Fetch needs five.
Q8: How many key presses are required to view a list of upcoming recordings?

Q9: When watching live TV and/or time-shifting, and the user decides to record that programme, is the existing time-shift buffer prepended to the recording (or otherwise saved) or does the recording begin at the current point?

IanL-S

#63
DMC

At this stage I suspect that the most comprehensive way to control the IceBox whould be using table or phone (or a PC). OpenWebif is used for remote access to Enigma2 operatings. It can also be used to access LibreELEC itself.

For LibreELEC, one of the setup parameters is the mode in which the deviced boots to; for the IceBox that would be to the Enigma2 plug. I suspect that the Enigma2 default would be to live TV.

LibreELEC claims to have wide RCU support, so we do not have to rely on the RCU that comes with the IceBox. There is listing of basic commands that are supported on the wiki [https://wiki.libreelec.tv/configuration/ir-remotes]. When I "role my own" IceBox I will see if I can get various Toppy and Beyonwiz RCU to work [afterthought: and the Skippa RCU]; they all have dedicated keys for EPG, Timer List, and Recordings list. Hopefully they can be used without having to resort to customise settings.

I hope to be able to give a listing of "common" remotes that work with the IceBox before the end of beta testing.

My recollection is that there are problems with Beyonwiz if you are watching either live TV or using the buffer, then going into record mode. But the Beyonwiz used an Enigma2 implementation that is several gerneation old.

Hopefully it will be possible to set IceTV series recordings from the IceBox; if not there is way of doing so with Enigma2 EPG implemenation - I suspect it is a sub-set of Autotimer function.

Ian
IceTV: IceBox + BYOB IceBox + 2xTRF-2400 + 2xTF7100HDPVRtPlus + SKIPPA [RIP] + T2 + U4 + V2
No IceTV: a few Toppys and T2
Synology NAS
Check out the oztoppy wiki and oztoppy Forum for Toppy help

MD

For recordings there is a button with an IceTV logo that takes one straight to the list.

IanL-S

#65
Greetings IceTV enthusiasts! What follow is the IanL-S understanding of the current status of the project; the responsibility for the content is mine alone.

I gather that MD is gratified by the interest shown in this thread.

Over time things have become a little confused about the steps being taken by IceTV in response to the demise of Beyonwiz. There is a two-pronged approach:

  • The development of IceTV plugin that will work with European Enigma2 boxes. It is my understanding that initially it will be available for OpenViX (Beyonwiz OS is a fork of OpenViX). Other distributions may also be supported. Most, if not all, European Enigma2 PVRs are capable of running a variety of Enigma2 builds such as openViX, openATV, and Vu+.
  • The development of the PC based IceBox PVR. Contrary to prior "speculation" the new IceBox does not use the Enigma2 framework. I assume it uses the Kodi PVR API (application programming interface). This is being implemented through a customised version of LibreELEC, which users will also be able to install on their own hardware.



Understandably the primary focus in on getting the IceBox PVR functions working smoothly. Many of the things that we enthusiasts are interested in may not fit in with the priorities that that have been decided on for progressing the IceBox PVR. The important thing is the creation of a PVR that ordinary users will find both easy and intuitive to use.

How does the IceBox PVR Work? My understanding is that IceTV has high expectations for the IceBox PVR. It is to be everything the Skippa was intended to be and more. Presumably it will forsake everything that was bad about the Skippa (the responsibility of the OEM) and retain everything that was good about the Skippa. Good would include the ability to set series recording using the IceBox. The bad would include using numbers to name recoding that were then assoicated with program name (and details) via an (unreliable) internal data base.

OpenWebif: While LibreELEC comes with an implementation of OpenWebif, the IceBox PVR functions are not designed to be accessed by OpenWebif (and I'm not sure what one would want to do that cannot be done by IceTV app or IceTV www site).

Playing media on other network devices: The networking protocols that LibreELEC supports should allow users to access content on network connected devices that use one of the protocols. I assume that such media will be "played" using Kodi itself, rather than IceBox PVR. As far as I can work out LibreELEC Kodi implementation does not have native player for Enigma2 recordings such as those created by a Beyonwiz; they will be played as standard MEPEG2 ts or H.264 ts recordings.

User support: IceTV will provide information to assist users in setting up the IceBox and its day-to day use. MD has accepted my offer to set up a wiki through which "user initiated" development of "more exotic usage" can be progressed and documented.

IceTV: IceBox + BYOB IceBox + 2xTRF-2400 + 2xTF7100HDPVRtPlus + SKIPPA [RIP] + T2 + U4 + V2
No IceTV: a few Toppys and T2
Synology NAS
Check out the oztoppy wiki and oztoppy Forum for Toppy help

raymondjpg

Quote from: IanL-S on November 03, 2022, 02:31:27 PMOpenWebif: While LibreELEC comes with an implementation of OpenWebif, the IceBox PVR functions are not designed to be accessed by OpenWebif (and I'm not sure what one would want to do that cannot be done by IceTV app or IceTV www site).
One would want to do this for the same reason that OpenWebif is implemented for BW PVRs - to allow for headless management of options, timers and recordings.

The only implementation of web access I can find in LibreELEC is Chorus2. There is no sign of an OpenWebif addon, either in the repositories available in LibreELEC, or come to that in Windows implementations of Kodi. My reading of Chorus2 is that it is oriented towards media management, and I was unable to find or configure any other of my LibreELEC service or PVR addons through the interface.

This is not a complaint but an observation. All may be configurable through the IceTV app. If I had a complaint it would be that the standard response to the inability to copy and paste text to linux versions of Kodi goes something along the lines that it is not needed because it is a media application. Looks like typical linux hubris to me, and I had hoped that some web access would be able to get around it.
Beyonwiz T2, Beyonwiz U4, IceBox BYO with Hauppauge WinTV-dualHD (x2), Hauppauge WinTV-quadHD

IanL-S

#67
I am sure I came across a reference to OpenWebif when reading up on LibreELEC; but as always it is possible that I am mistaken. A bit disappointing if it is not available. I am certain that it was not in relation to the (unstable) Enigma2 plugin.

Well did another quick search and could find nothing - clearly a seniors moment! Have updated the post.

Ian
IceTV: IceBox + BYOB IceBox + 2xTRF-2400 + 2xTF7100HDPVRtPlus + SKIPPA [RIP] + T2 + U4 + V2
No IceTV: a few Toppys and T2
Synology NAS
Check out the oztoppy wiki and oztoppy Forum for Toppy help

prl

Quote from: IanL-S on November 03, 2022, 02:31:27 PMBeyonwiz OS is a fork of OpenViX

No, it was based on a different Enigma2 variant, but I can't remember which one. Peteru posted the genealogy of the Beyonwiz firmware on the Beyonwiz forum, but it's no longer available.

And it's not technically a fork, in Git parlance.

But of OpenViX and OpenATV, I prefer the OpenViX UX, which is a bit closer to the Beyonwiz in that respect.
Peter
Beyonwiz T4 in-use
Beyonwiz T2, T3, T4, U4 & V2 for testing

prl

Quote from: IanL-S on November 03, 2022, 02:31:27 PMThe development of IceTV plugin that will work with European Enigma2 boxes. It is my understanding that initially it will be available for OpenViX

There is already a port of the IceTV plugin in OpenATV. It had become inoperable over time, but I recently fixed its worst problems (one of which was that the IceTV plugin would go into an infinite loop when it tried to download the EPG and timers) and those fixes are now in the current release of OpenATV.

There is now a standalone IceTV plugin that I have ported to OpenViX. It still has some minor problems that I'm working on, and I don't know whether it has filtered through to an OpenViX release (rather than a developer version). I don't think that it's quite ready for showtime.

But I have also looked at making it portable to OpenATV, and I've done most of the work needed for that, and discussed it with the OpenATV developers, but I won't try to get the current OpenATV version replaced by the new version until I've ironed out the other issues.
Peter
Beyonwiz T4 in-use
Beyonwiz T2, T3, T4, U4 & V2 for testing

IanL-S

Peter, thanks for the update on IceTV Enigma2 plugins.

Ian
IceTV: IceBox + BYOB IceBox + 2xTRF-2400 + 2xTF7100HDPVRtPlus + SKIPPA [RIP] + T2 + U4 + V2
No IceTV: a few Toppys and T2
Synology NAS
Check out the oztoppy wiki and oztoppy Forum for Toppy help

johnmw1

As an original owner of a DP-S1 which is just starting to give me some grief, I look forward to being able to finally replace it very soon. I would be keen to learn more about BYOB also.

Cheers,
John

MD

Hi John,

The BYOB store page will go live within the next week which should help.  For the time being go to the IceBox store page and simply imagine installing the software to repurpose an old PC you may have. Shortly that software will also work on Raspberry Pi, Mac Minis etc too.

johnmw1

Hi Colin,

Thanks for the update, I look forward to it.

Cheers,
John

MD

Hi again John,

The IceTV website BYOB store page is now live.  Note the software download, when available, will initially only work on a PC.  Raspberry Pi etc will need some more work at our end and will come later, as soon as we can.