Seven SD EPG Missing

Started by Don Grover, December 09, 2008, 10:07:23 AM

Previous topic - Next topic

Don Grover

Hi,
Im a beyonwiz S1 user since inception using IceTV Subscription.
Using currentl released S1 firmware ver DPS1-01.05.261  /  10.14.1.8
Location Chelsea, Vic 3196 (Morning Peninsula)
I have 6 x Channel 7 and have picked one with best signal strength.

Why is there no 7 EPG for 7 SD

To try and solve this I have.
1) Cleared Ice Guide Cach
2) Cleared Channel Data
3) Re Initialised Unit
4) Reset to Factory
5) Reset all parameters& Configured OK

Why is only Channel 7 SD & HD showing no programme EPG




Daniel Hall at IceTV

For reference I have spoken to Don and this was a problem with having multiple channels with an LCN of 7 (and 70 for HD), deleting the unwanted channels rather than setting up a favourites list is the way to go.
Regards,

Daniel.
CTO.

pandem

I'm having a similar issue with ch7. My location is in Perth and run a BW with fw=280.
I have executed a factory reset on the BW after the Firmware update.
Over the past few weeks and it could be more I get every other channel but not ch7sd.
ABCHD SBS, CH7HD Ch9HD and SD but not C7 sd.

Any ideas?


tonymy01

As per the previous message, how many 7SD channels do you have in your Wiz?  You are in a regional area perhaps, is Seven actually on LCN6?
Make sure you aren't in a favourites group on the Wiz, and press "List" to see all the channels your unit has, ensure you don't have duplicates (if you do, you will need to delete the ones that have poorer reception to avoid any confusion in future).
Regards
Regards
Tony

Beyonwiz DP-T4 owner... still.

pandem

Tonymy01,

Yes you are correct the issue was not having 7sd in the favouties list. Once it was added the all worked just fine. Great how I set up the favourites twice and left out 7sd both times. This may be explained as we don't watch 7 anyway. Only when the AFL is on that is.

Pandem.