Author Topic: Firmware post 1.1.10604  (Read 2854 times)

Offline Mantorok

  • Senior Member
  • ****
  • Posts: 123
    • View Profile
Firmware post 1.1.10604
« on: October 21, 2015, 09:26:56 AM »
Daniel/Dave,

Is there any new firmware currently in the works (either in development or testing) or is 1.1.10604 the last firmware we can expect for the foreseeable future?

If 1.1.10604 is the last firmware that's fine.  I'd just like to know so I can determine if I want to keep my Skippa or not. Not knowing is worse!

Regards,
Mantorok

Offline Dave at IceTV

  • Guru
  • *****
  • Posts: 1258
    • View Profile
    • IceTV Knowledgebase Articles
Re: Firmware post 1.1.10604
« Reply #1 on: October 21, 2015, 05:13:27 PM »
Daniel/Dave,

Is there any new firmware currently in the works (either in development or testing) or is 1.1.10604 the last firmware we can expect for the foreseeable future?

If 1.1.10604 is the last firmware that's fine.  I'd just like to know so I can determine if I want to keep my Skippa or not. Not knowing is worse!

I don't know of any new firmware currently in the works so I suspect that 1.1.10604 could well be the last firmware.
cheers

Dave
Customer Service

Offline bodogbodog

  • IceTV Beta
  • Guru
  • *
  • Posts: 374
    • View Profile
Re: Firmware post 1.1.10604
« Reply #2 on: October 21, 2015, 06:58:33 PM »
I don't know of any new firmware currently in the works so I suspect that 1.1.10604 could well be the last firmware.

That is very sad news indeed
Beyonwiz T2 1gb + E8400 Win Svr 2013, 4GB RAM, 8TB storage, Tiny Twin USB Tuner, Hauppauge WinTV NOVA TD-500 Tuner + IceTV Skippa

Offline Mantorok

  • Senior Member
  • ****
  • Posts: 123
    • View Profile
Re: Firmware post 1.1.10604
« Reply #3 on: October 22, 2015, 08:01:50 AM »

Yes that is sad but I'd prefer to know rather than not know. I appreciate you being honest with us Dave.

Offline create

  • Newbie
  • *
  • Posts: 5
    • View Profile
Re: Firmware post 1.1.10604
« Reply #4 on: October 22, 2015, 02:03:28 PM »
If this is the last firmware update does this mean that my skippa is going to always be intrinsically tied to icetv?  So I can never use a free to air guide?

Offline IanL-S

  • Guru
  • *****
  • Posts: 982
    • View Profile
    • IceTV SKIPPA wiki
Re: Firmware post 1.1.10604
« Reply #5 on: October 22, 2015, 02:39:18 PM »
If this is the last firmware update does this mean that my skippa is going to always be intrinsically tied to icetv?  So I can never use a free to air guide?

I suspect this is the case. :'( Looking at the information displayed when the SKIPPA boots it looks as if the IceTV module is loaded separately, but there is no way to stop it from loading. And, if you can, I doubt that you will be able to use an alternative EPG source.

Ian
IceTV: 2xTRF-2400 + 2xTF7100HDPVRt + SKIPPA + T2
No IceTV: a few Toppys
Synology NAS
Check out the oztoppy wiki and Topfield Aus Forum for Toppy help
ozSKIPPA wiki coming soon (I hope)

Offline create

  • Newbie
  • *
  • Posts: 5
    • View Profile
Re: Firmware post 1.1.10604
« Reply #6 on: October 22, 2015, 03:27:31 PM »
So I am held to ransom to pay the $7.99/month or my skippa becomes a brick? 
What is the future of ad skipping?  Do I have to pay to keep it working too?

Offline Dave at IceTV

  • Guru
  • *****
  • Posts: 1258
    • View Profile
    • IceTV Knowledgebase Articles
Re: Firmware post 1.1.10604
« Reply #7 on: October 22, 2015, 03:49:04 PM »
So I am held to ransom to pay the $7.99/month or my skippa becomes a brick? 
What is the future of ad skipping?  Do I have to pay to keep it working too?

As far as I know ad skipping will continue to work on all skippas as long as you have an active IceTV account.

Offline TimC

  • Senior Member
  • ****
  • Posts: 147
    • View Profile
Re: Firmware post 1.1.10604
« Reply #8 on: October 22, 2015, 04:58:59 PM »
So I am held to ransom to pay the $7.99/month or my skippa becomes a brick? 
What is the future of ad skipping?  Do I have to pay to keep it working too?

As far as I know ad skipping will continue to work on all skippas as long as you have an active IceTV account.

I know that all this wasn't IceTVs original intent, but "create" has a point.  All those with Skippas and no other PVRs are now essentially held to ransom.

For those of us that have other PVRs its no big deal. We were paying for the service before and apart from some lost subscription things go on as before.
If we decide to withdraw from IceTV, its no big deal we can switch our devices over to the FTA guide and carry on. Personnaly I have no desire to do this.
 
However those who purchased a Skippa with a lifetime subscription are now in a position where they either pay up or use their Skippa as an anchor.

For these people they have a device that because IceTV resurrected continues to work, which probably means that any claim through PayPal or a credit card company is probably doomed to fail. There's no point returning the device, you just end up being an unsecured creditor. 
There is no way the even break even.

While its really just a point of perspective, I can appreciate how they feel. What a mess.

I wonder how many Skippa owners are in this position.

I am guessing the Intellectual Property rights for the firmware is held by UEC/Altech.
What is the lagal standpoint on hacking a firmware for a device that no longer supported?

Is there anybody in the group with the skills to hack it?

Its a real pity, because the Skippa had the potential to be the best PVR on the market.
If a few pretty minor instabilities were ironed out it would be, but it appears that is not to be.

Its all a bit disheartening really.
Toppy, 2400, Toppy 2460, Skippa

Offline Dave at IceTV

  • Guru
  • *****
  • Posts: 1258
    • View Profile
    • IceTV Knowledgebase Articles
Re: Firmware post 1.1.10604
« Reply #9 on: October 22, 2015, 10:08:28 PM »
There are people who still want to buy a Skippa, or have 1 and want a 2nd one, so there is a market for working as-new Skippas.

I suspect there'd also be a 2nd-hand market for the handful of Skippas that freeze because there's a very good chance that a new power supply for $30+postage will get them working properly.

Offline stretch4x4

  • Senior Member
  • ****
  • Posts: 76
    • View Profile
Re: Firmware post 1.1.10604
« Reply #10 on: October 22, 2015, 10:17:12 PM »
Hmm well I would certainly consider selling mine..

I have to agree with Tim, this is my first PVR and I was hoping it would be my last as it seemed to tick all the boxes..

But I preordered knowing it had a lifetime subscription, I am not sold on having to fork over a monthly fee to have the thing continue to work.. Also think there are still bugs and features that need addressing so without further updates I can't see it being a long term solution unfortunately..

I originally purchased it to use it to stream live tv to a computer in another room but I am pretty sure this feature will never see the light of day :( I guess we can only hope that the hardware reemerges in another form and we can piggyback off it's firmware..

Offline TimC

  • Senior Member
  • ****
  • Posts: 147
    • View Profile
Re: Firmware post 1.1.10604
« Reply #11 on: October 22, 2015, 11:03:23 PM »
Hmm well I would certainly consider selling mine..
This might be worth starting a new thread under General


Share via facebook Share via twitter

clip
T2 not allocating timers to third timer after firmware update

Started by IanL-S on Beyonwiz

2 Replies
878 Views
Last post April 03, 2017, 02:26:38 PM
by IanL-S
thumbup
29 January 2016 Toppy firmware 2.16.00

Started by IanL-S on Topfield

0 Replies
1053 Views
Last post March 12, 2016, 04:38:40 PM
by IanL-S
xx
ICetv missing on T3 after most recent firmware update

Started by bradfulleroz on Beyonwiz

0 Replies
1140 Views
Last post January 10, 2016, 03:26:20 PM
by bradfulleroz
xx
Firmware to allow free to air epg and skippa

Started by face44 on SKIPPA

7 Replies
2943 Views
Last post November 06, 2015, 09:50:09 AM
by IanL-S