IceTV Forum

IceTV General => IceTV EPG Content => Topic started by: grampus on September 16, 2020, 01:40:14 PM

Title: Ch 10 EPG ?
Post by: grampus on September 16, 2020, 01:40:14 PM
On my BW devices ch 10 may have become "out of Wack"  since the advent of the new 10 shake has appeared
LCN 1 at the moment is supposed to be NCIS Los Angeles starting at 1300, according to the EPG, but is actually the bachelor.



FTA EPG is showing the correct line up channels to EPG etc.
Ive tried retuning the channels to no avail.
Is there anything else I need to do?

I am in Melbourne area
Title: Re: Ch 10 EPG ?
Post by: grumpy_geoff on September 16, 2020, 03:23:07 PM
10 HD is now on LCNs 1 & 15
10 BOLD is now only on LCN 12
10 SHAKE is on LCN 13
Title: Re: Ch 10 EPG ?
Post by: pheywood on September 17, 2020, 06:46:26 PM
In Sydney 10 HD is still on 1 and 13, the Guide Setting has it on 15, and 10 Shake is on 350.
Title: Re: Ch 10 EPG ?
Post by: pcss on September 17, 2020, 07:49:38 PM
In Melbourne. Using TVWebScheduler. Have an entry "2621" in channel mapping which I'm not sure is 10Shake or 10Bold but whichever it is, I've since lost the other after these changes.
Title: Re: Ch 10 EPG ?
Post by: grumpy_geoff on September 17, 2020, 08:26:49 PM
I think the channel mapping for 10 HD Perth is identifying an incorrect SID for the service on LCN 1.  It should be Dec. 1665 (Hex. 681), not Dec. 897.
Snippet from the IceTV header -
Code: [Select]
,{"id":"2624","name":"10 HD","name_short":"10 HD","network_id":"12","region_id":"6","is_hd":1,"lcns":"1,15","region_name":"WA - Perth","network_name":"Ten","is_hidden":0,"icon_src":"http://images.icetv.com.au/channels/ten-hd-v2.png","icon_width":0,"icon_height":0,"is_capital_channel":false
,"dvbt_info":[{"original_network_id":"4116","transport_stream_id":"1543","service_id":"1668","lcn":"15","frequency":"0"}
             ,{"original_network_id":"4116","transport_stream_id":"1543","service_id":"897","lcn":"1","frequency":"0"}]}
Additionally, not that I think it matters, but 10 Bold is marked as HD ("is_hd":1).
Title: Re: Ch 10 EPG ?
Post by: grampus on September 17, 2020, 08:51:23 PM
Had the following response from Ice TV support.
around 6pm.

All should now be OK as we have obtained all the new Network TEN data and updated nationwide.
Title: Re: Ch 10 EPG ?
Post by: pcss on September 17, 2020, 09:11:16 PM
That doesn't appear to be the case for XML data - my issues observed well after 6PM local time.
Title: Re: Ch 10 EPG ?
Post by: dougie69 on September 17, 2020, 09:55:10 PM
The LCNs for NSW Central Coast region have not been updated in the IceTV / My Account / Guide Settings.
Title: Re: Ch 10 EPG ?
Post by: dougie69 on September 17, 2020, 09:56:11 PM
In Sydney 10 HD is still on 1 and 13, the Guide Setting has it on 15, and 10 Shake is on 350.

Have you tried a full rescan?
Title: Re: Ch 10 EPG ?
Post by: pheywood on September 18, 2020, 01:04:06 PM
Yes dougie69, and that worked. Thanks.
Title: Re: Ch 10 EPG ?
Post by: BazzaG on September 18, 2020, 03:44:22 PM
Not sure what I should be seeing in my IceTV settings, but I'm not seeing 10 Shake in my list of channels (Melbourne).

See attached pic.
Title: Re: Ch 10 EPG ?
Post by: Tiphanee on September 18, 2020, 03:49:34 PM
Hi BazzaG,

10 Shake is not due to begin transmission until 27 September so you won't see any content for it at this stage.

Cheers,

Tiphanee
Title: Re: Ch 10 EPG ?
Post by: BazzaG on September 18, 2020, 04:23:03 PM
Tiphanee,

I wasn't expecting to see any content in the EPG itself but shouldn't I see 10 Shake in the list of Channel Ten channels?
Title: Re: Ch 10 EPG ?
Post by: Daniel Hall at IceTV on September 18, 2020, 04:43:43 PM
I am working on 10 Shake now, an email will be sent out shortly with more details.
Title: Re: Ch 10 EPG ?
Post by: IanL-S on September 18, 2020, 05:20:13 PM
One oddity I noticed on my TRF-2400 was that 10 Shake is not listed with other Network 10 LCNs when I bring up the LCN list and sort via provider. Ah, I see they have inconsistent provider name, in one case it is TEN Melbourne (for Shake) and Ten Melbourne (for the others). Fortunately it makes no difference to the functioning of IceTV.

Ian
Title: Re: Ch 10 EPG ?
Post by: Daniel Hall at IceTV on September 18, 2020, 05:38:30 PM
One oddity I noticed on my TRF-2400 was that 10 Shake is not listed with other Network 10 LCNs when I bring up the LCN list and sort via provider. Ah, I see they have inconsistent provider name, in one case it is TEN Melbourne (for Shake) and Ten Melbourne (for the others). Fortunately it makes no difference to the functioning of IceTV.

Ian

This actually will cause an issue on the TRF-2400, it would have been scanned in at some high LCN at 10HD was already at 13 (which moved to 15). The LCN needs to be correct to map, once the channel is enabled (watch for the email from us) you will probably need to re-scan the Topfield for it to work properly.
Title: Re: Ch 10 EPG ?
Post by: IanL-S on September 18, 2020, 08:25:52 PM
Daniel, I did a full service reset on all the IceTV enabled Toppys so it should not be a problem. Did the same with the T2 and U4.

Ian
Title: Re: Ch 10 EPG ?
Post by: Trial_Master on September 19, 2020, 02:49:34 PM
Is 10HD going to remain on LCN 15 in Brisbane? I tried LCN 1  it there was no guide data even though itís enabled in my ICE settings.
Title: Re: Ch 10 EPG ?
Post by: Daniel Hall at IceTV on September 19, 2020, 03:17:07 PM
Is 10HD going to remain on LCN 15 in Brisbane? I tried LCN 1  it there was no guide data even though itís enabled in my ICE settings.

Yes, 10HD will be available on both LCN 1 and 15 in Brisbane from now on.
Title: Re: Ch 10 EPG ?
Post by: grumpy_geoff on September 19, 2020, 03:34:50 PM
I tried LCN 1  it there was no guide data even though itís enabled in my ICE settings.

Got it in Perth -
The service on LCN 1, formerley 10 BOLD, SID 681:

Code: [Select]
  {
   "begin": "12:50",
   "sname": "10 HD",
   "end": "13:20",
   "title": "Jamie Oliver: Keep Cooking And Carry On",
   "now_timestamp": null,
   "shortdesc": "[Rpt] ",
   "sref": "1:0:19:681:607:1014:EEEE0000:0:0:0:",
   "begin_timestamp": 1600491000,
   "duration": 30,
   "duration_sec": 1800,
   "picon": "/picon/1_0_1_681_607_1014_EEEE0000_0_0_0.png",
   "longdesc": "Jamie Oliver pitches some unique culinary tips, and super-flexible recipes tailored to ingredients found in everyday kitchens, with a view to inspire some tasty yet healthy distractions during the unprecedented global lockdown.\n",
   "date": "Sat 19.09.2020",
   "genreid": 165,
   "genre": "Leisure hobbies: cooking",
   "id": 61100
  },

The service on LCN 15, formerley on LCN 13, SID 684:

Code: [Select]
  {
   "begin": "12:50",
   "sname": "10 HD",
   "end": "13:20",
   "title": "Jamie Oliver: Keep Cooking And Carry On",
   "now_timestamp": null,
   "shortdesc": "[Rpt] ",
   "sref": "1:0:19:684:607:1014:EEEE0000:0:0:0:",
   "begin_timestamp": 1600491000,
   "duration": 30,
   "duration_sec": 1800,
   "picon": "/picon/1_0_19_684_607_1014_EEEE0000_0_0_0.png",
   "longdesc": "Jamie Oliver pitches some unique culinary tips, and super-flexible recipes tailored to ingredients found in everyday kitchens, with a view to inspire some tasty yet healthy distractions during the unprecedented global lockdown.\n",
   "date": "Sat 19.09.2020",
   "genreid": 165,
   "genre": "Leisure hobbies: cooking",
   "id": 61100
  },
Originally I had nothing in Perth on LCN 1, and as I posted on the previous page, didn't expect it to work since IceTV were using an incorrect SID mapping for the service on LCN 1. 
They've since remedied that and are using the correct SID -
Code: [Select]
,"dvbt_info":
[{"original_network_id":"4116","transport_stream_id":"1543","service_id":"1668","lcn":"15","frequency":"0"}
,{"original_network_id":"4116","transport_stream_id":"1543","service_id":"1665","lcn":"1","frequency":"0"}]}

Perhaps they got it wrong for Brisbane too?
Title: Re: Ch 10 EPG ?
Post by: Daniel Hall at IceTV on September 19, 2020, 04:30:07 PM
Yes, there was a typo in the Perth data and this got fixed (sadly this was all last minute and pretty rushed).

I have just re-confirmed the details for Brisbane against the data we got from Ten so please try again and see if the guide data shows up against LCN 1.
Title: Re: Ch 10 EPG ?
Post by: grumpy_geoff on September 19, 2020, 04:36:04 PM
I have just re-confirmed the details for Brisbane against the data we got from Ten so please try again and see if the guide data shows up against LCN 1.

10 HD on LCN 1 is using SID 0x641 - is that what you've mapped?
Title: Re: Ch 10 EPG ?
Post by: Trial_Master on September 19, 2020, 04:53:17 PM
I have just re-confirmed the details for Brisbane against the data we got from Ten so please try again and see if the guide data shows up against LCN 1.

Do I need to rescan BW again? LCN 1 is still blank in EPG.

EDIT: I followed this process again and itís showing EPG on LCN 1 now 😀

https://support.icetv.com.au/hc/en-us/articles/227080427-A-new-channel-is-available-but-I-am-not-seeing-a-guide-for-it