IceTV Forum

IceTV Guide for IceTV enabled PVRs => Beyonwiz => Topic started by: IanL-S on April 03, 2017, 10:25:49 AM

Title: T2 not allocating timers to third timer after firmware update
Post by: IanL-S on April 03, 2017, 10:25:49 AM
Since updating the Firmware on one of my T2 IceTV sends error messages about failed timer update. It appears that the T2 is only allocating timers to two of the three tuners. It appears that the T2 recocognises that it has 3 turners (see attachment). Any suggestions. I have already tried a Factory Reset, but it made no difference.

I had to disconnect the USB tuner to do the firmware update.

Ian
Title: Re: T2 not allocating timers to third timer after firmware update
Post by: prl on April 03, 2017, 11:52:14 AM
I've replied (http://beyonwiz.com.au/forum/viewtopic.php?f=55&t=11042#p150810) to this question in the Beyonwiz forum. I have no difficulty (http://beyonwiz.com.au/forum/viewtopic.php?f=55&t=11042#p150813) setting three simultaneous recordings from three different broadcasters on a T2 with a USB tuner running firmware 20170310. I tried setting the timers both from IceTV and from the Beyonwiz EPG screen (using the IceTV EPG).
Title: Re: T2 not allocating timers to third timer after firmware update
Post by: IanL-S on April 03, 2017, 02:26:38 PM
Problem now sorted; for full details see the Beyonwiz orum: http://www.beyonwiz.com.au/forum/viewtopic.php?f=55&t=11042&p=150834#p150806 (http://www.beyonwiz.com.au/forum/viewtopic.php?f=55&t=11042&p=150834#p150806).
Ian