IceTV Forum

IceTV Guide for IceTV enabled PVRs => SKIPPA => Topic started by: TimC on July 15, 2016, 10:03:20 PM

Title: Blurry Picture
Post by: TimC on July 15, 2016, 10:03:20 PM
I have discovered that my Skippa is generating a blurred picture, or more to the point, a double image on the bottom half of the screen getting worse the closer it is to the bottom of the screen.

Note, I switched to a Toppy input and the picture was fine, it's the Skippa and not the monitor.
I was initially sending 1080I. I tried 1080P with no improvement. 720p was fractionally better but not really worth the picture quality loss.

I am hoping that some of the more knowledgeable may know something I can try.

I not afraid to replace the odd component, but if the board is all flow soldered it would be beyond my equipment and skills.
Title: Re: Blurry Picture
Post by: IanL-S on July 16, 2016, 08:23:04 AM
Have you tried a rest to factory settings? If that does not work you could try reinstalling the firmware.

Ian
Title: Re: Blurry Picture
Post by: TimC on July 17, 2016, 01:58:35 PM
Thanks Ian. 

It was actually the HDMI input on the TV that I was using for the Toppy. 
All is Good now.
Title: Re: Blurry Picture
Post by: IanL-S on July 17, 2016, 03:19:39 PM
Thanks Ian. 

It was actually the HDMI input on the TV that I was using for the Toppy. 
All is Good now.

Good news. I have had issues with my ageing Sharp TV - have to periodically do a factory reset when it starts having issues with HDMI input.

Ian