IceTV Forum

IceTV Guide for IceTV enabled PVRs => SKIPPA => Topic started by: Mantorok on October 09, 2015, 08:29:37 AM

Title: AutoSkip not working since upgrading to 1.1.10600
Post by: Mantorok on October 09, 2015, 08:29:37 AM
I've noticed that anything the Skippa has recorded since upgrading to 1.1.10600 has not been processed for AutoSkip.  I've tried rebooting it several times but its still not working.

In the IceTV settings it says its processing a recording but it never finishes.  See attachment for an example.  Notice that its busy with a recording from 8-Oct 7:25pm but the current time is 9-Oct 6:16am.  It can't be taking nearly 11 hours to process a 1 hour recording.  It's the only recording on the HDD too.

I've now formatted the HDD and have scheduled a recording during the day.  I'll check it tonight when I get home.

I noticed jas55 mentioned he's having problems too in another thread (http://forum.icetv.com.au/iceforum/general/44/skippa-user-experience-so-far/4578/msg23301#msg23301 (http://forum.icetv.com.au/iceforum/general/44/skippa-user-experience-so-far/4578/msg23301#msg23301))

Anyone else having problems?
Title: Re: AutoSkip not working since upgrading to 1.1.10600
Post by: ozmosys on October 09, 2015, 10:22:58 AM
Yep, I've got exactly the same problem. I've also done the reboot etc. with no success. Very frustrating as the AutoSkip functionality is the main reason I purchased Skippa. Hope we get a resolution very soon.

Cheers

Steve
Title: Re: AutoSkip not working since upgrading to 1.1.10600
Post by: IanL-S on October 09, 2015, 11:31:56 AM
It seems to be working form me; but I may have been looking at recordings processed before the update was applied.

Ian
Title: Re: AutoSkip not working since upgrading to 1.1.10600
Post by: Mantorok on October 09, 2015, 11:51:46 AM
Hi Ian,

Yes this only seems to be a problem for recordings created after the firmware upgrade (for me anyway).  Any recordings prior to the upgrade still have the AutoSkip data in them (ie. they have the little IceTV logo in the MY REC page).
Title: Re: AutoSkip not working since upgrading to 1.1.10600
Post by: IanL-S on October 09, 2015, 02:29:12 PM
I did some more checking and I have the same issue.

Ian
Title: Re: AutoSkip not working since upgrading to 1.1.10600
Post by: Heideho on October 10, 2015, 12:40:34 PM
Same here. I didn't connect it with the firmware update though. I assumed it was a server side activity that had been shut off with the issues about Administration for the company.
Title: Re: AutoSkip not working since upgrading to 1.1.10600
Post by: Daniel Hall at IceTV on October 10, 2015, 01:29:28 PM
Hi Guys,

I can confirm that this is definitely a firmware bug, AutoSkip has not been disabled on any boxes.

I tried to get the next firmware released yesterday but was unsuccessful, I will be able to try again on Monday to get it released.
Title: Re: AutoSkip not working since upgrading to 1.1.10600
Post by: Heideho on October 10, 2015, 05:30:40 PM
Thank you for the update Daniel.
Title: Re: AutoSkip not working since upgrading to 1.1.10600
Post by: Mantorok on October 12, 2015, 04:08:39 PM
Hi Guys,

I can confirm that this is definitely a firmware bug, AutoSkip has not been disabled on any boxes.

I tried to get the next firmware released yesterday but was unsuccessful, I will be able to try again on Monday to get it released.

Hi Daniel,

How are you going with getting that new firmware released?

Regards,
Mantorok
Title: Re: AutoSkip not working since upgrading to 1.1.10600
Post by: Dave at IceTV on October 18, 2015, 04:43:17 PM
Hi Guys,

I can confirm that this is definitely a firmware bug, AutoSkip has not been disabled on any boxes.

I tried to get the next firmware released yesterday but was unsuccessful, I will be able to try again on Monday to get it released.

Hi Daniel,

How are you going with getting that new firmware released?

Regards,
Mantorok

For those looking for the next firmware update to re-enable AutoSkip see:
http://support.icetv.com.au/entries/97066117-How-to-update-the-software-from-a-USB-stick