IceTV Forum

IceTV Guide for IceTV enabled PVRs => Windows Vista Media Center => Topic started by: Nudge on January 29, 2010, 08:45:41 PM

Title: Edit: Interactive and channel matching - additional testing issue found
Post by: Nudge on January 29, 2010, 08:45:41 PM
Hey all,

I have been doing more testing of scheduling through interactive and found that on a dual tuner set up with pre/post padding set at 10m/15m respectively 'when possible' I get the yellow triangle error message displayed for the 'series 2' example below.

Guide would look like this....
[----------series 1 / channel A -----]
        [-----series 2 / channel B-----][-----series 2 / channel B-----]

Normally if this was scheduled within WMC all would record. I am guessing that interactive maybe applying the padding to each show individually?

Will try a few other options.

Nudge
Title: Edit: Interactive and channel matching - additional testing issue found
Post by: Nudge on January 30, 2010, 05:41:52 AM
Now I am stumped  ???, I removed series 1 from the schedule, resent series 2 and I am still getting yellow error triangle. So its either

- channel mapping / matching?
- back to back recordings of the same series?

Will keep testing.

Nudge

EDIT - resolved - it was a channel mapping issue, for some reason the 'channel-IceTV' name had reverted to the inband naming and the IceTV version wasn't available to select. Had to reset and scan all channels again, disable all inband first, then install ICE.
Title: Re: Interactive and padding - additional testing issue found
Post by: lukem on January 31, 2010, 09:46:23 AM
I would be interested in having a look at your logfile.

Cheers
Title: Re: Edit: Interactive and channel matching - additional testing issue found
Post by: Nudge on February 02, 2010, 06:08:27 PM
Luke,

I attached a snip of the log file from the machine affected. I removed the older log info and kept from when 3.0.0.10 was detected as a new version till now.

I ended up resolving the issue, was related to 7TWO-IceTv being replaced by 7TWO on Prime.

All 3 machines are now in full interactive scheduling mode, I don't do any local scheduling.

Later,

Nudge