Messages

The V2's processor is considerably faster than that of the T3 and as a result has a faster startup from shutdown and a rather snappier UI response.

If the V2 has as many, or more, tuners than the T3, I'd be thinking about making the V2 the main device.

Great advice, hadn't realized how slow the T3 was until I started using the V2, really enjoying it now. btw, took about a week to transfer everything thru my local network but got there eventually.

Would it have been better to have formatted that usb hdd in ntfs, because I just noticed the another usb hdd that I had used as a backup for the T3 that was ntfs, showed up when plugged into the V2.
Or would that only be readable and not available to record to?

Sorry, can't answer the 1st two questions cos I have already put it back into the T3 but I took a couple of photos when I was doing it
1. File system check
Back USB3 Slot (Backup+ Desk)(4000.786 GB
2.
Error.
Checking file system...
Error:Possibly non-existent device?
fsck.ext4:No such file or directory while trying to open/dev/sdd1


The T3's hdd was formatted in the T3 and the ext usb hdd was formatted from the V2.
After hours of stuffing around it seems to me that if I format the usb hdd in the T3 then the V2 won't read it and if I format in the V2 then the T3 wont read it.
I have got around it by transferring files via the network and will gradually move them over a few/many nights.

btw, after I formatted on one box then checked it on the other I got this message
"Checking file system...
Error:e2fsck-b 8193<device>
or
e2fsck-b 32768 <device>

Tried moving the T3,s hdd into a external container for the V2 but when I did a file system check on the V2 I got a "Checking File System- Error:Possibly non-existant device? fsck.ext4: No such file or directory while trying to open /dev/sdd1"
This was despite it showing correctly as a 4Tb drive.
Did try moving files over via the network, but thats pretty slow(could take days to move 3Tb)
Suspect that the file system of an internal T3 hdd isn't seen on an external usb drive,but that's just a guess. Any ideas?

The V2's processor is considerably faster than that of the T3 and as a result has a faster startup from shutdown and a rather snappier UI response.

If the V2 has as many, or more, tuners than the T3, I'd be thinking about making the V2 the main device.

Yes, I had noticed that and am considering that too. Should take the 4Tb hdd out of the T3 and put it in an external container for the V2

Thanks for that. Yes, since I copied the recordings info, all those other options have shown up. Now will have to go thru a thousand recordings and decide what I want on each recorder. Think I will keep the important stuff on the T3 and misc stuff on the V2

OK, found a section on ICE TV where I can copy all the recordings info from the T3 to the V2 and they all show up now, but is it possible to record some shows on the T3 and different ones on the V2

I have done that several times but nothing comes up on the timers.
Even if I log into my account at ICE TV I can look at whats on my list of recordings and the T3 has them all, but the V2 has nothing.

I have a T3 and have been using ICE TV for years but now I also have a V2 which I have set up ICE TV on and I Fetch EPG and download timers but none of them show up.All the timers are working on the T3, so what more do I need to do?

For an Existing IceTV User the region_id missing error usually means the email address you are trying to login with is not in the ictev database.

Correct, looked right, but too many dots in there.

Fixed it.
My error was that when I entered my email address while doing the wizard, I used the .net that's on the keyboard, not realizing that it already had the dot  there, and I added another dot in front of it. Must have looked at that dozens of times and not seen the 2 ..'s in there. So alls good now.

After the last firmware upgrade (today) I didn't use the saved setup and did a new Ice TV install, but when I got to the Wizard and try to login as a existing user , that's when I get this error message.
Says  "Login Failure:406 Client error:not acceptable for url:blah blah blahsome hyrogliphics, then :error code10 region was missing from Request"
I am connected to internet as I can see my PC and stream Youtube

No, the email address is in, there just above the password box.

After playing around with the latest T3 firmware and setting everything all up again, when I turn on the ICE TV plugin I get no information on the ICE TV epg screen.
If I try to log-in I get an error message and when I look at the logs get a whole lot of info ending in "Region was missing from Request"
What does that mean and how do I fix it.
I can log in to my account on-line from my PC ok, but not from the T3.