Main Menu
Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - Fester

#1
IceTV EPG Content / Re: No data 9HD And 9Life
November 26, 2015, 10:11:43 PM
Quote from: simoncasey on November 26, 2015, 09:27:16 PM
I've just noticed something similar. Timers that were set for GEM (ie channel 90) are now recording on 9HD (the new channel 90). It looks like we need to resend/update the various channel nine recordings.

Something not right, all my nine network recordings are all over the place. I think I will delete all the nine recordings and resend.
#2
IceTV EPG Content / Re: No data 9HD And 9Life
November 26, 2015, 09:24:05 PM
My Beyonwiz T4 is a bit confused, The Block labelled recording is actually Survivor and the Survivor labelled recording is actually The Block.
#3
General Discussions / Re: IceTV Resurrected
October 16, 2015, 03:39:57 PM
Quote from: Dave at IceTV on October 16, 2015, 02:47:42 PM
Quote from: Fester on October 16, 2015, 01:17:05 PM
Dave, thinking this was the end, I have deleted my account. Is it possible to resurrect it or do I have to now open up a new account?

Hi Fester,

I have recovered your deleted account. I had to generate a new password which I have emailed to the gmail address in your account. You can log in on the website and change the password to what you want.

You will need to sign in again with your iPhone, Humax and TX series Beyonwiz.

When you closed your the system also deleted all of your series recordings. But I was able to recover a list of shows you had been recording and sent them to you in an email.

cheers

Cheers, thanks Dave
#4
General Discussions / Re: IceTV Resurrected
October 16, 2015, 01:17:05 PM
Dave, thinking this was the end, I have deleted my account. Is it possible to resurrect it or do I have to now open up a new account?
#5
SKIPPA / Re: IceTv in Voluntary Administarion
October 08, 2015, 08:10:28 AM
Quote from: csutak40 on October 08, 2015, 04:01:42 AM
I still have my subscription. 

I wonder for how much longer! I was seriously thinking of the Skippa, glad I never went through with it now.
#6
Quote from: HelloGoodThanks on May 31, 2015, 02:36:26 AM

OK another edit... I have just checked the timer list on my T3 (should have done that before posting) and my timers appear as I expect them to, not as indicated by the website/app. I'll keep my fingers crossed that they stay there and fire off.

Mine were OK, but I just noticed that the times are now not correct on the T3, might be worth checking yours.
I have now deleted all scheduled recordings and gone to autotimer until this mess is sorted.
#7
Quote from: TT33 on May 30, 2015, 11:43:02 AM
Still having issues it seems.  Two programs tonight are not scheduled.  I have contact support.

Same here!! I have a few.
No good deleting them either, they will come back!
#9
Beyonwiz / Re: Beyonwiz T3
November 05, 2014, 09:01:28 AM
Quote from: IanL-S on November 04, 2014, 04:48:50 PM
Quote from: bodogbodog on April 21, 2014, 08:50:23 AM
<<snip>> - what product do the non IceTV units use to schedule and manage recordings?

The means by which you can do this depends on the particular PVR. With Topfield TMS units, there are several powerful TAPs (Topfield Application Programs) that allow you to schedule and manage recordings. You can also remotely manage them over LAN or internet using TMSWebServer.

Ian

My daughter has my Toppy 2460 now, I am over Topfields, they have been nothing but unreliable for me. My Beyonwiz T3 never misses a beat.
#10
Humax / Re: Firmware Version 1.08.22 for HDR 7500T
October 15, 2014, 09:23:46 AM
Quote from: wayfarer on October 06, 2014, 02:45:53 PM
According to Humax this can occur when the unit is in the vicinity of a large screen TV.

Wasn't that something to do with the sensitivity of the front panel getting interference from the TV? In fact on their Facebook page:

"If you are having random changes,
- If you can get access to the front panel option, please change from Very High (Default) down to High -> Medium -> Low and Very Low and select the level that suits your environment.
- If you are not able to reach front panel option before it switches off, temporarily move it from current location and change the level.

*If Very Low doesn't solve the problem, please check your HDMI CEC Link between HUMAX and your TV"
#11
Beyonwiz / Re: Beyonwiz T3 - padding for timers
September 24, 2014, 08:25:54 PM
I totally agree. At the moment I am using my Humax as my main recorder as the T3 is missing the end of most recorded programs. I believe IceTV are in the process of a fix, but it would be nice if they could give an indication when this may be.
#12
Beyonwiz / Re: Missing Channels in Ice TV Guide on T3
September 23, 2014, 07:54:27 PM
Thanks Daniel, didn't need to do that, everything came good on its own.
#13
Beyonwiz / Re: Beyonwiz T3
September 21, 2014, 10:39:16 AM
Quote from: Paul55 on September 21, 2014, 08:47:19 AM
Also, from within IceTV, go to My Account, My Recorders to add your T3.

I didn't even have to do that, as soon as I logged in to IceTV from my T3 on the new firmware it did that automatically.
#14
Beyonwiz / Re: Missing Channels in Ice TV Guide on T3
September 21, 2014, 09:24:00 AM
Noticed this morning that Network 7 channels In Adelaide have started to populate.
#15
Beyonwiz / Re: Missing Channels in Ice TV Guide on T3
September 18, 2014, 09:27:25 PM
I am having the same issue here in Adelaide for the 7 network channels only. My timers for any 7 network channels were failing. But I noticed this morning that the yellow triangle had disappeared and I had the red blob for all my 7 timers, so all good there. But the IceTV EPG for all network 7 channels is not populated still, but I am happy my timers are all good.