Ch 10 EPG ?

[Daniel Hall at IceTV]

One oddity I noticed on my TRF-2400 was that 10 Shake is not listed with other Network 10 LCNs when I bring up the LCN list and sort via provider. Ah, I see they have inconsistent provider name, in one case it is TEN Melbourne (for Shake) and Ten Melbourne (for the others). Fortunately it makes no difference to the functioning of IceTV.

Ian

This actually will cause an issue on the TRF-2400, it would have been scanned in at some high LCN at 10HD was already at 13 (which moved to 15). The LCN needs to be correct to map, once the channel is enabled (watch for the email from us) you will probably need to re-scan the Topfield for it to work properly.

[IanL-S]

Daniel, I did a full service reset on all the IceTV enabled Toppys so it should not be a problem. Did the same with the T2 and U4.

Ian

[Trial_Master]

Is 10HD going to remain on LCN 15 in Brisbane? I tried LCN 1  it there was no guide data even though it’s enabled in my ICE settings.

[Daniel Hall at IceTV]

Is 10HD going to remain on LCN 15 in Brisbane? I tried LCN 1  it there was no guide data even though it’s enabled in my ICE settings.

Yes, 10HD will be available on both LCN 1 and 15 in Brisbane from now on.

[grumpy_geoff]

I tried LCN 1  it there was no guide data even though it’s enabled in my ICE settings.

Got it in Perth -
The service on LCN 1, formerley 10 BOLD, SID 681:

Code: [Select]

  {
   "begin": "12:50",
   "sname": "10 HD",
   "end": "13:20",
   "title": "Jamie Oliver: Keep Cooking And Carry On",
   "now_timestamp": null,
   "shortdesc": "[Rpt] ",
   "sref": "1:0:19:681:607:1014:EEEE0000:0:0:0:",
   "begin_timestamp": 1600491000,
   "duration": 30,
   "duration_sec": 1800,
   "picon": "/picon/1_0_1_681_607_1014_EEEE0000_0_0_0.png",
   "longdesc": "Jamie Oliver pitches some unique culinary tips, and super-flexible recipes tailored to ingredients found in everyday kitchens, with a view to inspire some tasty yet healthy distractions during the unprecedented global lockdown.\n",
   "date": "Sat 19.09.2020",
   "genreid": 165,
   "genre": "Leisure hobbies: cooking",
   "id": 61100
  },

The service on LCN 15, formerley on LCN 13, SID 684:

Code: [Select]

  {
   "begin": "12:50",
   "sname": "10 HD",
   "end": "13:20",
   "title": "Jamie Oliver: Keep Cooking And Carry On",
   "now_timestamp": null,
   "shortdesc": "[Rpt] ",
   "sref": "1:0:19:684:607:1014:EEEE0000:0:0:0:",
   "begin_timestamp": 1600491000,
   "duration": 30,
   "duration_sec": 1800,
   "picon": "/picon/1_0_19_684_607_1014_EEEE0000_0_0_0.png",
   "longdesc": "Jamie Oliver pitches some unique culinary tips, and super-flexible recipes tailored to ingredients found in everyday kitchens, with a view to inspire some tasty yet healthy distractions during the unprecedented global lockdown.\n",
   "date": "Sat 19.09.2020",
   "genreid": 165,
   "genre": "Leisure hobbies: cooking",
   "id": 61100
  },
Originally I had nothing in Perth on LCN 1, and as I posted on the previous page, didn't expect it to work since IceTV were using an incorrect SID mapping for the service on LCN 1. 
They've since remedied that and are using the correct SID -

Code: [Select]

,"dvbt_info":
[{"original_network_id":"4116","transport_stream_id":"1543","service_id":"1668","lcn":"15","frequency":"0"}
,{"original_network_id":"4116","transport_stream_id":"1543","service_id":"1665","lcn":"1","frequency":"0"}]}

Perhaps they got it wrong for Brisbane too?

[Daniel Hall at IceTV]

Yes, there was a typo in the Perth data and this got fixed (sadly this was all last minute and pretty rushed).

I have just re-confirmed the details for Brisbane against the data we got from Ten so please try again and see if the guide data shows up against LCN 1.

[grumpy_geoff]

I have just re-confirmed the details for Brisbane against the data we got from Ten so please try again and see if the guide data shows up against LCN 1.

10 HD on LCN 1 is using SID 0x641 - is that what you've mapped?

[Trial_Master]

I have just re-confirmed the details for Brisbane against the data we got from Ten so please try again and see if the guide data shows up against LCN 1.

Do I need to rescan BW again? LCN 1 is still blank in EPG.

EDIT: I followed this process again and it’s showing EPG on LCN 1 now 😀

https://support.icetv.com.au/hc/en-us/articles/227080427-A-new-channel-is-available-but-I-am-not-seeing-a-guide-for-it