Author Topic: Humax HDR 7510T terrestrial antenna has short circuited  (Read 3206 times)

Offline yksrep

  • Newbie
  • *
  • Posts: 1
    • View Profile
Humax HDR 7510T terrestrial antenna has short circuited
« on: August 10, 2014, 06:40:46 PM »
Im having an issue with my Humax.

When I do a scan of channels with the 5v antenna power off it either comes up with nothing or it what it does come up with is channels with very poor signal. However if I turn it on I get all the channels with good signal.

However after a short time of having the antenna turned on I get the message that the "terrestrial antenna has short circuited".

I have tried a number of things

1. Tried using an indoor antenna
2. Different Cables

with the indoor antenna i get nothing.

and with a different cable I get the same issue. Works for a short time then short circuits

Offline Doctor Whatuwant

  • Full Member
  • ***
  • Posts: 45
    • View Profile
Re: Humax HDR 7510T terrestrial antenna has short circuited
« Reply #1 on: August 11, 2014, 08:49:20 AM »
The 5V Antenna Power function is for use with a masthead amplifier on your antenna. If you don't have a masthead amplifier this function 'should' not help (having said that, with antennas I would believe anything). Most masthead amps in Australia are not 5V so a separate power source must be used if you have one.

The system works by sending voltage up the antenna cable core and returning it via the shielding. The amplifier picks up the voltage and also isolates it from the antenna. If you don't have an amplifier the voltage would be directly across the antenna which is not a good idea and probably why you get an error message.

So, you have a signal problem but unless you have a 5V masthead amp (unlikely) you should not use the 5V function. Do you get good signal with antenna directly to the TV?

UPDATE: Thinking about it some more, maybe you DO have a masthead amp (which could be anything from 12V upwards) and by some miracle the 5V power from the Humax is enough to get it working, but the current draw due to the voltage mis-match is too much for the Humax to sustain.
« Last Edit: August 11, 2014, 12:53:04 PM by Doctor Whatuwant »

Share via facebook Share via twitter

Channel 12 and Channel 13 not showing up in guide - Darwin - Humax HDR-7500T

Started by steve1278 on IceTV EPG Content

0 Replies
Last post September 12, 2020, 11:59:39 AM
by steve1278
Humax HDR-3000t can see but won't play HDR-7500t files

Started by GeorgeC on Humax

0 Replies
Last post August 12, 2019, 03:44:49 PM
by GeorgeC
Humax 2tune (HDR-3000T)-recording two programmes back-to-back

Started by Rich88 on Humax

0 Replies
Last post March 26, 2019, 03:41:08 PM
by Rich88
Humax 7500T IceTV Guide not appearing

Started by on Humax

1 Replies
Last post April 16, 2017, 07:18:19 PM
by MD