Author Topic: Brisbane ch 91 & 93 on Beyonwiz T4, T2 and T3  (Read 2861 times)

Offline Dave at IceTV

  • Guru
  • *****
  • Posts: 1258
    • View Profile
    • IceTV Knowledgebase Articles
Brisbane ch 91 & 93 on Beyonwiz T4, T2 and T3
« on: December 16, 2015, 06:02:04 PM »
I've just discovered, and fixed, an incorrectly mapped channel in the Brisbane region that would have been causing Nine's guide and recordings to show and record on GO! and vice versa if viewing/recording the channels on 91 and 93.

Channels 9 and 99 were correct. It only affected the new channel numbers (LCNs) 91 and 93.

This only affected Brisbane and not the retransmitted channels from the Gold Coast or the Sunshine Coast.

If you have a T4, T2 or T3 Beyonwiz and you pickup the Brisbane channels from Brisbane you should restart it from 'Menu > Power > Reboot'.
cheers

Dave
Customer Service

Offline mac37

  • Senior Member
  • ****
  • Posts: 142
    • View Profile
Re: Brisbane ch 91 & 93 on Beyonwiz T4, T2 and T3
« Reply #1 on: January 04, 2016, 07:38:44 PM »
Just about to start a thread on this, when I noticed the subject in the list !

Actually, it DOES affect the retransmitted channels from the SUNSHINE COAST.

In the EPG on the T2:-
Channel 91 shows the GO! programs.
Channel 93 is absolutely empty.
Channel 99 also shows the GO! programs

9 & 90 & 92 & 94 are correct. (so is 99)
Mac
Humax HDR 7500T, Beyonwiz T2 X 2
IceTV Interactive EPG - HDMI to LG LCD LED 50 &  Linden 65

Offline Dave at IceTV

  • Guru
  • *****
  • Posts: 1258
    • View Profile
    • IceTV Knowledgebase Articles
Re: Brisbane ch 91 & 93 on Beyonwiz T4, T2 and T3
« Reply #2 on: January 05, 2016, 01:59:00 PM »
Just about to start a thread on this, when I noticed the subject in the list !

Actually, it DOES affect the retransmitted channels from the SUNSHINE COAST.

In the EPG on the T2:-
Channel 91 shows the GO! programs.
Channel 93 is absolutely empty.
Channel 99 also shows the GO! programs

9 & 90 & 92 & 94 are correct. (so is 99)

Hi mac37,

You remember how to get the channel triplet id numbers off the T series Beyonwiz PVRs? (the same as you did for 7, 7two and 7mate before Christmas)

Can you reply with the id numbers for 90, 9, 91, 92, 93, 94 and 99. And 95 if you have it.
  • Exit any menus, EPGs and guides etc. i.e. Go to live TV.
  • Change channel to one of those channels.
  • Go to 'Menu > Information > Service'.
  • Once you are in the 'Information > Service' menu, press the Green button.
  • *Now note the TSID, ONID and SID details shown for this channel.
  • Repeat steps 1 to 5 for the other channels.
* Note: The ID numbers are made of digits from 0 to 9 and letters from A to F. Don't mistake up a B for an 8 or a D for an 0 or vice versa.

Then reply in the following format:

9 Brisbane:
592.500 MHz
TSID: 0x0400
ONID: 0x1012
SID: 0x0401
LCN: 9

9 GO:
592.500 MHz
TSID: 0x0400
ONID: 0x1012
SID: 0x040B
LCN: 93

9 Gem:
592.500 MHz
TSID: 0x0400
ONID: 0x1012
SID: 0x040A
LCN: 92

Offline mac37

  • Senior Member
  • ****
  • Posts: 142
    • View Profile
Re: Brisbane ch 91 & 93 on Beyonwiz T4, T2 and T3
« Reply #3 on: January 05, 2016, 05:10:50 PM »
Hi Dave,
Thank you for replying.

The info you require is as follows.

9 Brisbane                           
592.500 MHz
TSID: 0x0400
ONID: 0x1012
SID: 0x0401
LCN: 9

9HD Brisbane
592.500 MHz
TSID: 0x0400
ONID: 0x1012
SID: 0x0480
LCN: 90

9 Brisbane
592.500 MHz
TSID: 0x0400
ONID: 0x1012
SID: 0x0409
LCN: 91

9Gem
592.500 MHz
TSID: 0x0400
ONID: 0x1012
SID: 0x040a
LCN: 92

9GO!
592.500 MHz
TSID: 0x0400
ONID: 0x1012
SID: 0x040b
LCN: 93

9Life
592.500 MHz
TSID: 0x0400
ONID: 0x1012
SID: 0x0407
LCN: 94

Extra
592.500 MHz
TSID: 0x0400
ONID: 0x1012
SID: 0x0408
LCN: 95

9GO!
592.500 MHz
TSID: 0x0400
ONID: 0x1012
SID: 0x0406
LCN: 99

AND - While you are at it 7two and 7mate (Sunshine Coast) LCN 62 and 63 are as follows

7TWO (-QLD) (Sunshine Coast)
669.500 MHz
TSID: 0x0950
ONID: 0x1013
SID: 0x0962
LCN: 62

7mate (Sunshine Coast)
669.500 MHz
TSID: 0x0950
ONID: 0x1013
SID: 0x0963
LCN: 63

I still get failed timers with no matching service. BUT - thank you for fixing up Channel 7 Sunshine Coast LCN6.


Kind regards



« Last Edit: January 06, 2016, 12:45:41 PM by mac37 »

Offline mac37

  • Senior Member
  • ****
  • Posts: 142
    • View Profile
Re: Brisbane ch 91 & 93 on Beyonwiz T4, T2 and T3
« Reply #4 on: January 06, 2016, 12:47:03 PM »
edited 9gem - sorry

Offline mac37

  • Senior Member
  • ****
  • Posts: 142
    • View Profile
Re: Brisbane ch 91 & 93 on Beyonwiz T4, T2 and T3
« Reply #5 on: January 15, 2016, 12:24:36 PM »
Any progress ??

Offline Dave at IceTV

  • Guru
  • *****
  • Posts: 1258
    • View Profile
    • IceTV Knowledgebase Articles
Re: Brisbane ch 91 & 93 on Beyonwiz T4, T2 and T3
« Reply #6 on: January 15, 2016, 03:37:44 PM »
Sorry, I forgot to tell you. Your triplets for the "nines" match what is in our system for the 'Sunshine Coast'. And they also match for 7two-QLD and 7mate (you should NOT be using '7mate on Prime').

Someone else just had unexplainable failed timers with the no matching service error message. The solution (after much trial and error) was to Reboot the Beyonwiz from the Power menu then rerun the IceTV Setup Wizard. Finally, resend all recordings.

The lengthy trial and error resolving this issue for them prompted me to write a knowledgebase article:
http://support.icetv.com.au/entries/98658198
« Last Edit: January 15, 2016, 04:56:09 PM by Dave at IceTV »

Offline JPP

  • Guru
  • *****
  • Posts: 386
    • View Profile
Re: Brisbane ch 91 & 93 on Beyonwiz T4, T2 and T3
« Reply #7 on: January 15, 2016, 04:03:56 PM »
Having trouble accessing this link Dave.....
Phil.
Beyonwiz T2, DVDO Duo Video Processor

Offline Dave at IceTV

  • Guru
  • *****
  • Posts: 1258
    • View Profile
    • IceTV Knowledgebase Articles
Re: Brisbane ch 91 & 93 on Beyonwiz T4, T2 and T3
« Reply #8 on: January 15, 2016, 04:49:29 PM »
Having trouble accessing this link Dave.....

I've edited the link, and formatted it as a hyperlink now... but still when I click on it nothing happens. I need to right-click on it and 'open in new tab'.


Interesting. I just put a space after the link and now I can click on it !?!?
« Last Edit: January 15, 2016, 04:56:52 PM by Dave at IceTV »

Offline mac37

  • Senior Member
  • ****
  • Posts: 142
    • View Profile
Re: Brisbane ch 91 & 93 on Beyonwiz T4, T2 and T3
« Reply #9 on: January 15, 2016, 06:45:04 PM »
Thank you for the info.
For the channel nine GO! problem, and the 7TWO-QLD problem (YES I have ignored 7mate on prime).
I have gone the whole hog and followed the full instructions - performing the dummy scan, and then the full scan (clear = yes).
Then the re-boot and the running of the IceTV Setup Wizard etc.

The result is that, in the EPG, Channel 91 is still showing programs for GO! ( I have even tried setting 9 Brisbane as 91 in "my Account").
Needless to say that the channel that scans as 91, does actually show channel 9 (Bris) programs.

As far as 7TWO-QLD goes, despite your advice in our email support conversation, that it really belongs to Townsville, you just stated that the triplets are correct for the Sunshine Coast. But I still get a "No matching service" failure to schedule.

If the triplets are (obviously) different for 7TWO (Brisbane) and 7TWO-QLD, and also, if you state that the LCNs do not feature in the recording channel allocation on the BW T2, and that it is based only on the triplets, then why, if I change the LCN for 7TWO (Bris) to 62 (Sunshine Coast 72), does it schedule the recording on channel 62 ?

I have reset "My Account" to the way you set it, during our support email session. (7TWO as 62 and 7TWO_QLD as disabled !), in other words I have given up !!

BUT - I am grateful that you managed to sort out 7 Bris (LCN 7) and 7 QLD (LCN 6) successfully.

Kind regards
« Last Edit: January 24, 2016, 10:55:35 AM by mac37 »

Offline mac37

  • Senior Member
  • ****
  • Posts: 142
    • View Profile
Re: Brisbane ch 91 & 93 on Beyonwiz T4, T2 and T3
« Reply #10 on: January 18, 2016, 12:42:50 PM »
Since it flows on from the "no matching service" discussion, I will include this one in this thread.

I have just received a "No matching service" for "Animal super parents" on WIN, at 8:00PM on Sunday 24th. I usually record these things on 9HD now, and it IS scheduled successfully on 9HD.
Somehow it was scheduled for WIN as well, at the same time. Maybe because I did not specify a particular network ( Nine or WIN) - don't know.

Since I had "escape to the country" scheduled at 8:30, I'm supposing that the overlap with padding would have meant that it was really a "timer conflict". Not sure about that either.

I have just scheduled other stuff on WIN as a test, with no problems.


PS You are still pumping out GO! programs against channel 91 !! (I don't really care though !)  ::)


Share via facebook Share via twitter

xx
Brisbane Coming Soon showing Sky News Programmes?

Started by kgl on IceTV EPG Content

2 Replies
523 Views
Last post October 19, 2018, 08:37:51 AM
by kgl
xx
Blanks in ABC EPG - Brisbane

Started by kgl on IceTV EPG Content

1 Replies
466 Views
Last post October 04, 2018, 08:57:05 AM
by MD
xx
AFL Semi Final Melbourne V Hawthorne- Brisbane EPG

Started by kgl on IceTV EPG Content

1 Replies
2061 Views
Last post September 12, 2018, 01:25:42 PM
by Tiphanee
xx
Toppy 2460 rebooting in Brisbane

Started by 2353 on Topfield

4 Replies
3665 Views
Last post May 16, 2017, 06:09:02 AM
by IanL-S